[Elecraft] K3: SP 2 switches back to SP 1 during RX in Split
Gary Hinson
Gary at isect.com
Sun Feb 24 14:09:20 EST 2013
I've had something similar. The cause on my K3 (SN 2887) appears to be some
sort of intermittent problem in the current-sensing circuit. The K3
presumably detects excess current, assumes it is the stereo audio chip being
shorted by a mono speaker (it isn't!), and switches itself to mono to
protect the chip.
Watch the K3's current meter: at times, mine varies wildly between 1 and N
amps where N is 'several', on receive, doing nothing much at all. Right
now, my K3 is reading a stable 1.10 amps.
The last time this issue happened to me was about 6 months ago. The actual
current draw from the supply was stable but the K3's meter was kicking
around, occasionally tripping the protection circuit. It cleared up by
itself for no obvious reason. I've had it a couple of times before that
too. I wonder if it might be a dry joint in that area or a dodgy
current-sensing chip.
73
Gary ZL2iFB
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Tom Boucher
> Sent: Monday, 25 February 2013 7:41 a.m.
> To: Reflector Posting Elecraft
> Subject: [Elecraft] K3: SP 2 switches back to SP 1 during RX in Split
>
> Yes Richard, this has happened to my K3 several times, always when the
> volume is too high and a loud burst of audio occurs.
>
> 73
> Tom G3OLB
>
> <<My friend Simon, HB9ATG has a strange problem: While listening in split
> mode, suddenly a relay clicks and the K3 switches back to mono, i.e.
> CONFIG:SPEAKERS 2 unexpectedly returns to SPEAKERS 1, without his
> transmitting or doing anything at all, just listening to the pileup.
> This can happen several times a day.
>
> Has anyone noticed this before?
>
> 73 de Richard - HB9ANM>>
>
> __________________________________________________________
> ____
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the Elecraft
mailing list