[Elecraft] KRC2 Modified Firmware?

[Craig - AE6RR]

Hi Jack,

That is an interesting idea; however that would be a very cryptic command to
issue every time I want to change a relay (switch radios, select different
audio output, etc.).

I do have a K3/100 at the remote site that I control via RemoteRig with a
K3/0.  Can I connect the KRC2 to the aux bus on the K3/100 and program the
PF1/PF2 keys on the K3 to cause the KRC2 to activate a couple of relays?

If so, where can if find the information to do this?

Thanks & 73,
- Craig, AE6RR


-----Original Message-----
From: Jack Brindle [mailto:jackbrindle at me.com] 
Sent: Wednesday, February 06, 2013 1:22 PM
To: Craig - AE6RR
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KRC2 Modified Firmware?

Why not just emulate a K2? All you need to do is to issue IF response to the
KRC2 and it will respond the the band/frequency and make alternate
selections. The PC does not need to listed to anything from the KRC2 unless
you really want it to.

Jack B, W6FB

On Feb 6, 2013, at 9:08 AM, Craig - AE6RR <ae6rr at pacbell.net> wrote:

> I would like to use a KRC2 at my remote station to control various relays.
> 
> This would require either new or modified firmware as the standard 
> firmware listens to a radio's CAT port and decode band information.
> 
> I would like communicate with the KRC2 via a terminal program such as 
> HyperTerminal and manually enter commands to actuate the relays.
> 
> I have been thinking about writing my own program for the PIC16 but if 
> someone has already done this, I would like to talk to them.
> 
> 
> 
> 73,
> 
> - Craig, AE6RR
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html