[Elecraft] K1 amp keying circuit

[Don Wilhelm]

Denny,

But I was thinking that you would not want to physically remove the 
tuner - putting it into CAL will effectively remove it.

73,
Don W3FPR

On 2/4/2013 7:01 PM, Dennis Rayfield wrote:
> Thanks Don.  My thought was that when I have it going into the amp, the KAT1 does not do me much good anyway, the tuner I have on the outboard side of the amp will be doing the work.
>
> Denny - KI3F
>
>
> On Feb 4, 2013, at 6:57 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:
>
>> Denny,
>>
>> Yes, it is really that simple.  I am not sure about your "plug it in" statement, if you use a connector at J1 on the filter board, you will not be able to plug in the KAT1 - so you may want to look for another place to pick up the 6R signal and 6 volts.
>>
>> 73,
>> Don W3FPR
>>
>> On 2/4/2013 6:41 PM, Dennis Rayfield wrote:
>>