January 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Jan 1 00:20:24 EST 2011
Ending: Mon Jan 31 23:40:17 EST 2011
Messages: 1601

• [Elecraft] LDEs on 80m   Sverre Holm (LA3ZA)
• [Elecraft] K2: 40m bandpass filter   Sverre Holm (LA3ZA)
• [Elecraft] K144XV and simultaneous 2m and 6m reception   Sverre Holm (LA3ZA)
• [Elecraft] LDEs on 80m   Poul Erik Karlshøj (PKA)
• [Elecraft] KPA-500 vs THP   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] K2 and WINMOR   2Cents
• [Elecraft] A vote of thanks to Don...   2rGarry
• [Elecraft] K3 loss of signals and no xmit   cx7tt at 4email.net
• [Elecraft] K3 Push to Talk Circuit   k7hbg at dslextreme.com
• [Elecraft] K3 with microwave transverter - Frequency display   AD6XY
• [Elecraft] Ameritron Solid State Amp control with Elecraft KRC2 Band Decoder   Craig - AE6RR
• [Elecraft] K3 Curious phenomenon with doublet on 80m   Wayne Adams
• [Elecraft] K3 filter options   Adriano
• [Elecraft] (K3) RTTY offset ?   Adriano
• [Elecraft] Fw: (K3) RTTY offset ?   Adriano
• [Elecraft] K2 VCO Alignment   Paul Agoglia
• [Elecraft] 250hz Filter - Audio drops   Tommy Alderman
• [Elecraft] 250hz Filter - Audio drops   Tommy Alderman
• [Elecraft] 250hz Filter - Audio drops   Tommy Alderman
• [Elecraft] win 7 32/64 bit   Tommy Alderman
• [Elecraft] ON4UN has a K3?   Tommy Alderman
• [Elecraft] P3 Utility not connecting   Tommy Alderman
• [Elecraft] K3/P3/PC baud rate   Tommy Alderman
• [Elecraft] clear RIT upon tuning in K3?   Tommy Alderman
• [Elecraft] CM500   Tommy Alderman
• [Elecraft] CM500   Tommy Alderman
• [Elecraft] More confusion   Tommy Alderman
• [Elecraft] FW: [N1MM] FSK problems on K3 radio   Tommy Alderman
• [Elecraft] FW: K3 Feature Request   Tommy Alderman
• [Elecraft] FW: K3 Feature Request   Tommy Alderman
• [Elecraft] K3 Spot Tone Level   Tommy Alderman
• [Elecraft] AF-1: First Impressions   Ken Alexander
• [Elecraft] AF1: First Impressions   Ken Alexander
• [Elecraft] KDSP2 - Now What Have I Done?   Ken Alexander
• [Elecraft] KDSP2 - Now What Have I Done?   Ken Alexander
• [Elecraft] K2 & Power Line Noise   Ken Alexander
• [Elecraft] Second antenna port...   Ken Alexander
• [Elecraft] APF Really Works   Ken Alexander
• [Elecraft] Second antenna port... [END of thread]   Ken Alexander
• [Elecraft] WTB K2 KI02   Doug Allen
• [Elecraft] OT - SMT breadboarding   Brian Alsop
• [Elecraft] OT - SMT breadboarding -tnx   Brian Alsop
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   Brian Alsop
• [Elecraft] KPA500 - just 500 watts?   Benny Aumala
• [Elecraft] [Elecraft K1 Battery Solution]   Michael Babineau
• [Elecraft] K2 & Power Line Noise   Michael Babineau
• [Elecraft] Panadaptor for K2   Eugene Balinski
• [Elecraft] K1 went out!   Eugene Balinski
• [Elecraft] P3 VFO B Tracking   James Balls
• [Elecraft] P3 VFO B Tracking   James Balls
• [Elecraft] P3 VFO B Tracking   James Balls
• [Elecraft] P3 VFO B Tracking   Jim Balls
• [Elecraft] P3 deaf ??   Jim Balls
• [Elecraft] P3 deaf ??   Jim Balls
• [Elecraft] P3 deaf ??   Jim Balls
• [Elecraft] K3--CAT IS command will shift IF while in TX   Nate Bargmann
• [Elecraft] WSPR with K3   Nate Bargmann
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   Nate Bargmann
• [Elecraft] k3 utility problem   Nate Bargmann
• [Elecraft] get to your local library.   Nate Bargmann
• [Elecraft] get to your local library.   Nate Bargmann
• [Elecraft] Nabble   Barry
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Barry
• [Elecraft] K3Util version history?   Barry
• [Elecraft] k3 Utility 1.4.1.8 download problem   Barry
• [Elecraft] 120V vs 240V   Barry
• [Elecraft] For sale: LP-Pan and EMU-0202, also softrock   Erik Basilier
• [Elecraft] just 500 W   Erik Basilier
• [Elecraft] Tips for using APF   Bruce Beford
• [Elecraft] KPA-500 vs THP   Claude Du Berger
• [Elecraft] win 7 32/64 bit ... caution needed...   Alan Bloom
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   Alan Bloom
• [Elecraft] unequal power output per tone in FSK   Alan Bloom
• [Elecraft] unequal power output per tone in FSK   Alan Bloom
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for theP3   Alan Bloom
• [Elecraft] P3 0.50 firmware   Alan Bloom
• [Elecraft] P3 0.050 Glitch?   Alan Bloom
• [Elecraft] P3 0.050 Glitch?   Alan Bloom
• [Elecraft] P3 spurious display   Alan Bloom
• [Elecraft] P3 S Unit Measurement   Alan Bloom
• [Elecraft] P3 0.050 Glitch?   Alan Bloom
• [Elecraft] P3 S meter variance   Alan Bloom
• [Elecraft] P3 S meter variance   Alan Bloom
• [Elecraft] P3 Beta 0050 - Transverter issue   Alan Bloom
• [Elecraft] OT: Spectrum defense matters   Alan Bloom
• [Elecraft] Center Line Missing on P3   Alan Bloom
• [Elecraft] p3 question ?   Alan Bloom
• [Elecraft] P3 Center Frequency   Alan Bloom
• [Elecraft] P3 and xvtr band   Alan Bloom
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   Alan Bloom
• [Elecraft] Dollars per watt (was: KPA500 - just 500 watts?)   Alan Bloom
• [Elecraft] Dollars per watt   Alan Bloom
• [Elecraft] P3 Commands in a K3 Macro?   Alan Bloom
• [Elecraft] P3 Temperature Specs   Alan Bloom
• [Elecraft] For Sale: K2 KIT and KIO2 NOT STARTED with all DOCS   Dan Boardman
• [Elecraft] WTB: T1-K T1 20W ATU NON STARTED Kit   Dan Boardman
• [Elecraft] WTB: T-I Antenna Tuner Built or Kit   Dan Boardman
• [Elecraft] short BNC to BNC cable assembly, where to get?   Bob
• [Elecraft] K3 Manual iTunes   Bob
• [Elecraft] K3/RigExpert TI-5   Larry Boekeloo
• [Elecraft] K3 Bandwidth in data mode   Larry Boekeloo
• [Elecraft] K3 Bandwidth in data mode   Larry Boekeloo
• [Elecraft] K3 Filter for PSk and RTTY question   Jack Brabham
• [Elecraft] K2 low audio problem   Tony Breathnach
• [Elecraft] let's see   Jack Brindle
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Jim Brown
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Jim Brown
• [Elecraft] K3 filter options   Jim Brown
• [Elecraft] RES: Yamaha CM500   Jim Brown
• [Elecraft] Getting a buzz, the wrong way   Jim Brown
• [Elecraft] K2 and K3 Microphone Input Impedance   Jim Brown
• [Elecraft] OT: "Flat" ferrite clamp-ons for window line   Jim Brown
• [Elecraft] CM500   Jim Brown
• [Elecraft] Getting a buzz, the wrong way   Jim Brown
• [Elecraft] P3 0.050 Glitch?   Jim Brown
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Jim Brown
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Jim Brown
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Jim Brown
• [Elecraft] (Very OT)Plasma TV noise   Jim Brown
• [Elecraft] KPA-500 vs THP   Jim Brown
• [Elecraft] KPA500 - just 500 watts?   Jim Brown
• [Elecraft] 120 vs 240   Jim Brown
• [Elecraft] KPA500 - just 500 watts?   Jim Brown
• [Elecraft] P3 Feature Request   Jim Brown
• [Elecraft] FW: K3 Feature Request   Jim Brown
• [Elecraft] LCD TV Causing RFI   Jim Brown
• [Elecraft] LCD TV Causing RFI   Jim Brown
• [Elecraft] Take the plung!   Jim Brown
• [Elecraft] LCD TV Causing RFI   Jim Brown
• [Elecraft] K3 at VP8ORK   Jim Brown
• [Elecraft] XMIT Key does not work   Lee Buller
• [Elecraft] KPA500 - just 500 watts?   Lee Buller
• [Elecraft] 120 vs 240   Lee Buller
• [Elecraft] A Comment on my 500 Watt Comment   Lee Buller
• [Elecraft] let's see   Wayne Burdick
• [Elecraft] clear RIT upon tuning in K3?   Wayne Burdick
• [Elecraft] unequal power output per tone in FSK   Wayne Burdick
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   Wayne Burdick
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   Wayne Burdick
• [Elecraft] P3 in TX consideration/suggestions ... maybe stupid   Wayne Burdick
• [Elecraft] Re： Solved - XV144, XV222, XV432   Wayne Burdick
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Wayne Burdick
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Wayne Burdick
• [Elecraft] KPA-500 vs THP   Wayne Burdick
• [Elecraft] KPA-500 vs THP   Wayne Burdick
• [Elecraft] Re： KPA-500 vs THP   Wayne Burdick
• [Elecraft] KPA-500 vs THP   Wayne Burdick
• [Elecraft] K-3: Unswitched Rx Ant   Wayne Burdick
• [Elecraft] KPA500 - just 500 watts?   Wayne Burdick
• [Elecraft] KPA500 Question   Wayne Burdick
• [Elecraft] KPA500 - just 500 watts?   Wayne Burdick
• [Elecraft] just 500W ?   Wayne Burdick
• [Elecraft] APF   Wayne Burdick
• [Elecraft] Tips for using APF   Wayne Burdick
• [Elecraft] K3 - Firmware question / QRQ   Wayne Burdick
• [Elecraft] K3 - Firmware question / QRQ   Wayne Burdick
• [Elecraft] APF re-check: Rev. 4.17 vs. 4.25 (no difference found)   Wayne Burdick
• [Elecraft] tilt stands...   Wayne Burdick
• [Elecraft] tilt stands...   Wayne Burdick
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   WILLIS COOKE
• [Elecraft] K3 losing RF   WILLIS COOKE
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   WILLIS COOKE
• [Elecraft] cw keyboard?   WILLIS COOKE
• [Elecraft] Use of Linked Main and Sub   Cady, Fred
• [Elecraft] Curious phenomenon with doublet on 80m   Cady, Fred
• [Elecraft] Backup/Restore current configuration via file   Cady, Fred
• [Elecraft] K3 RTTY - PSK D   Cady, Fred
• [Elecraft] OT: LDE defined   Duncan Carter
• [Elecraft] 500Hz 5-pole vs Inrad 500Hz 8-pole?   Duncan Carter
• [Elecraft] P3 spectrum display does not follow K3 following firmware upgrade   Andrew Catanzaro
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode fortheP3   Franco Cazzaniga
• [Elecraft] K3 Micro Manual Update   Ken Chandler
• [Elecraft] KPA-500 vs THP   Ken Chandler
• [Elecraft] KPA-500 vs THP   Ken Chandler
• [Elecraft] Tips for using APF   Ken Chandler
• [Elecraft] Tips for using APF   Ken Chandler
• [Elecraft] K-3: Unswitched Rx Ant   Charley
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Kok Chen
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Kok Chen
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Kok Chen
• [Elecraft] K3 Software for RTTY   Kok Chen
• [Elecraft] OT - SMT breadboarding   Kok Chen
• [Elecraft] K3 Manual iTunes   Kok Chen
• [Elecraft] unequal power output per tone in FSK   Kok Chen
• [Elecraft] unequal power output per tone in FSK   Kok Chen
• [Elecraft] unequal power output per tone in FSK   Kok Chen
• [Elecraft] K3 Slow power change   Kok Chen
• [Elecraft] A Comment on my 500 Watt Comment   Tom Childers
• [Elecraft] Elecraft Paint   David Christ
• [Elecraft] K3: Power puzzlement   David Christ
• [Elecraft] Filters and Configuration Questions   Paul Christensen
• [Elecraft] [K3] CW transmit filter bandwith   Paul Christensen
• [Elecraft] KPA500 - just 500 watts?   Paul Christensen
• [Elecraft] 120 vs 240   Paul Christensen
• [Elecraft] K2: Replacement tuning knob for K2?   Ron D'Eau Claire
• [Elecraft] K2: Replacement tuning knob for K2?   Ron D'Eau Claire
• [Elecraft] KPA500 - just 500 watts?   Ron D'Eau Claire
• [Elecraft] KPA500 - just 500 watts?   Ron D'Eau Claire
• [Elecraft] Taken the plunge!   Ron D'Eau Claire
• [Elecraft] P3 Temperature Specs   Ron D'Eau Claire
• [Elecraft] [K3] Mods missing from web page   Carl Clawson
• [Elecraft] [K3] Mods missing from web page   Carl Clawson
• [Elecraft] BNC adapter question   Edward R. Cole
• [Elecraft] Interfaces   Edward R. Cole
• [Elecraft] WTB LP-Pan   Edward R. Cole
• [Elecraft] (no subject)   Edward R. Cole
• [Elecraft] KPA500 - just 500 watts?   Edward R. Cole
• [Elecraft] 120 vs 240   Edward R. Cole
• [Elecraft] ANT2 port w/o Tuner   Edward R. Cole
• [Elecraft] First test of LP-Pan on K3 with emu0202   Edward R. Cole
• [Elecraft] First test of LP-Pan on K3 with emu0202   Edward R. Cole
• [Elecraft] [Bulk] K2 output power on 10 meters   Bill Coleman
• [Elecraft] [Bulk] K2: Change filter BW without realigning filters?   Bill Coleman
• [Elecraft] [Bulk] K2: Is there an ideal power supply voltage?   Bill Coleman
• [Elecraft] [Bulk] OT: Just in time for the contest season   Bill Coleman
• [Elecraft] [Bulk] ssb module or atu first?   Bill Coleman
• [Elecraft] [Bulk] kpa100 top cover panel screws   Bill Coleman
• [Elecraft] [Bulk] Replacement tuning knob for K2?   Bill Coleman
• [Elecraft] K2: Replacement tuning knob for K2?   Bill Coleman
• [Elecraft] [Bulk] [K2] K2's frequency counter cable with KPA100 installed   Bill Coleman
• [Elecraft] [Bulk] [K2] Frequency counter cable with KPA100 installed   Bill Coleman
• [Elecraft] KPA500 120-240VAC option?   Rick Comins
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for theP3   Bill Conkling
• [Elecraft] P3 S meter variance   Bill Conkling
• [Elecraft] Front panel BIAS   Bill Conkling
• [Elecraft] K3 build sequence   Bill Conkling
• [Elecraft] Prolific driver   Bill Conkling
• [Elecraft] K3 OT -Heil Mic/base for sale   Randy Cook
• [Elecraft] KPA 100 Wanted   Steve Cooke
• [Elecraft] ec2 computer   John Cooper
• [Elecraft] lcd monitor   John Cooper
• [Elecraft] K3 and Accessories for Sale   Jim Cox
• [Elecraft] P3 magenta 'pointer' in display?   Mike Cox
• [Elecraft] Interfaces   Don Cunningham
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   David Cutter
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   David Cutter
• [Elecraft] K3: advice about options to buy?   David Cutter
• [Elecraft] UK Elecraft Net   David Cutter
• [Elecraft] RX antenna (K3)   David Cutter
• [Elecraft] (Very OT)Plasma TV noise   David Cutter
• [Elecraft] Time-Out Timer   DL3LSM
• [Elecraft] KDVR3 Wish List   DL5OCD
• [Elecraft] Prolific driver   DM4iM
• [Elecraft] Elecraft Digest, Vol 81, Issue 25   Dave
• [Elecraft] P3 Beta 0050 - Transverter issue   Dave
• [Elecraft] K2 BFO Tune Up   Dave Anderson, K4SV
• [Elecraft] UPS UK - watch out   Dave, G4AON
• [Elecraft] UK Elecraft Net Sunday 16th Jan   Dave, G4AON
• [Elecraft] P3 and averaging - dillemma or no problem?   Dave, G4AON
• [Elecraft] spectrogram   Alan Davenport
• [Elecraft] K2/K3: Keyboard to CW possible with KUSB and no computer?   David Ferrington, M0XDF
• [Elecraft] P3 Utility not connecting   David Ferrington, M0XDF
• [Elecraft] OT - SMT breadboarding   David Ferrington, M0XDF
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   David Ferrington, M0XDF
• [Elecraft] K3 Spot Tone Level   Richard Davis
• [Elecraft] [K2] 160 meter module install   Brian Denley
• [Elecraft] [K2] 160 meter module install   Brian Denley
• [Elecraft] [K2] Ooof...   Brian Denley
• [Elecraft] [K2] Ooof.. Update   Brian Denley
• [Elecraft] [K2] Ooof.. Update   Brian Denley
• [Elecraft] A vote of thanks to Don...   Brian Denley
• [Elecraft] [K2] Noise Blanker problem   Brian Denley
• [Elecraft] [K2] Noise Blanker problem   Brian Denley
• [Elecraft] let's see   Rick Dettinger
• [Elecraft] KPA500 - just 500 watts?   Rick Dettinger
• [Elecraft] just 500W ?   Rick Dettinger
• [Elecraft] KPA500 - just 500 watts?   Rick Dettinger
• [Elecraft] KPA500 - just 500 watts?   Rick Dettinger
• [Elecraft] Elecraft SSB net report for Jan. 9, 2011   Dick Roth, KA1OZ
• [Elecraft] P3 question   Dick Dievendorff
• [Elecraft] P3 'Capture Image': Where Image Saved?   Dick Dievendorff
• [Elecraft] [K3] K3 Utility settings for CW filters   Dick Dievendorff
• [Elecraft] K3_Firmware   Dick Dievendorff
• [Elecraft] [Elecraft_K3] Re: Power gain calibration   Dick Dievendorff
• [Elecraft] K3/P3/PC baud rate   Dick Dievendorff
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   Dick Dievendorff
• [Elecraft] P3 how to question   Dick Dievendorff
• [Elecraft] k3 Utility 1.4.1.8 download problem   Dick Dievendorff
• [Elecraft] New Utility Problem   Dick Dievendorff
• [Elecraft] KPA3 Fails Calibration   Dick Dievendorff
• [Elecraft] Problems with HRD, Windows 7 and the old Serial converter cable using the PROLIFIC chip set   Michael Dillon
• [Elecraft] P3: VFO A marker gone   Thomas Doligalski
• [Elecraft] Elecraft Paint   Don
• [Elecraft] Blue Tooth   Don
• [Elecraft] K3 - RF Gain Calibration Error   Geoffrey Downs
• [Elecraft] K3 - RF Gain Calibration Error   Geoffrey Downs
• [Elecraft] K3/K144XV/P3 Signal Strength Readings   Geoffrey Downs
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   Geoffrey Downs
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   Geoffrey Downs
• [Elecraft] K3 Micro Manual Update   Michael Downs
• [Elecraft] K3 Manual iTunes   Michael Downs
• [Elecraft] P3 Micro Manual App   Michael Downs
• [Elecraft] Tips for using APF   Michael Downs
• [Elecraft] 250hz Filter - Audio drops   George Dubovsky
• [Elecraft] CM 500 For Sale   David Dunn
• [Elecraft] Taken the plunge!   EMD
• [Elecraft] Taken the plunge!   EMD
• [Elecraft] KPA500   Edward Dickinson, III
• [Elecraft] K3 Feature Request   Edward Dickinson, III
• [Elecraft] K3 Feature Request   Edward Dickinson, III
• [Elecraft] K3 Feature Request   Edward Dickinson, III
• [Elecraft] K3 Stumped.   Edward Dickinson, III
• [Elecraft] K3 Stumped.   Edward Dickinson, III
• [Elecraft] KAT3 freq range   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] k3 Utility 1.4.1.8 download problem   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA500 - just 500 watts? [END of Thread]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA500 120-240VAC option?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Second antenna port... [END of thread]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] No PTT   Hunter Ellington
• [Elecraft] Transmitting while listening in diversity mode   Scott Ellington
• [Elecraft] KAT3 freq range   Scott Ellington
• [Elecraft] K3 - Observations during NAQP CW   Scott Ellington
• [Elecraft] KAT3 freq range   Scott Ellington
• [Elecraft] KAT3 freq range   Scott Ellington
• [Elecraft] K3 TX spurs?   Scott Ellington
• [Elecraft] 120 vs 240   Scott Ellington
• [Elecraft] 120 vs 240   Scott Ellington
• [Elecraft] KPA500 - just 500 watts?   Scott Ellington
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Scott Ellington
• [Elecraft] Zero Beat   Scott Ellington
• [Elecraft] Zero Beat   Scott Ellington
• [Elecraft] K3 Spot Tone Level   Scott Ellington
• [Elecraft] K3 Spot Tone Level   Scott Ellington
• [Elecraft] OT: LDE defined   Steve Ellington
• [Elecraft] K3: Hears stations twice   Steve Ellington
• [Elecraft] K3: Hears stations twice   Steve Ellington
• [Elecraft] K3 antenna tuner.   Steve Ellington
• [Elecraft] (Very OT)Plasma TV noise   Steve Ellington
• [Elecraft] APF   Steve Ellington
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Steve Ellington
• [Elecraft] K3 - Firmware question / QRQ   Steve Ellington
• [Elecraft] K3 with WSPR   Eric
• [Elecraft] K1 Battery Solution   Eric
• [Elecraft] P3 Firmware .50   Eric
• [Elecraft] K3 - New Beta Firmware?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] Mods missing from web page   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 PA Temp   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] unequal power output per tone in FSK   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] XV144 fault (offset problem?)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KAT500   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] P3 ver 1.00   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA-500 vs THP   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] A Comment on my 500 Watt Comment   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 APF Problem   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Take the plung! [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] CAL PLL on K2 gives bizarre result   Tony Estep
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Tony Estep
• [Elecraft] WSPR with K3   Tony Estep
• [Elecraft] Curious phenomenon with doublet on 80m   Tony Estep
• [Elecraft] win 7 32/64 bit   Tony Estep
• [Elecraft] diversity   Tony Estep
• [Elecraft] Transmitting while listening in diversity mode   Tony Estep
• [Elecraft] Transmitting while listening in diversity mode   Tony Estep
• [Elecraft] Transmitting while listening in diversity mode   Tony Estep
• [Elecraft] WSPR with K3   Tony Estep
• [Elecraft] Getting a buzz, the wrong way   Tony Estep
• [Elecraft] K3/RigExpert TI-5   Tony Estep
• [Elecraft] K1 Battery Solution   Tony Estep
• [Elecraft] ERR 12V   Tony Estep
• [Elecraft] Getting a buzz, the wrong way   Tony Estep
• [Elecraft] KX1 in India   Tony Estep
• [Elecraft] Yamaha CM500 - Purchase from outside North America   Pete F5VNB
• [Elecraft] OT: Begali Simplex Mono   Pete F5VNB
• [Elecraft] Data modes issue   GREG FICHER
• [Elecraft] RX antenna (K3)   GREG FICHER
• [Elecraft] OT - SMT breadboarding   Mel Farrer
• [Elecraft] 120 vs 240   Mel Farrer
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   Richard Ferch
• [Elecraft] help with DX4WIN   Richard Ferch
• [Elecraft] K3 - Another push-to-talk question   Richard Ferch
• [Elecraft] FW: [N1MM] FSK problems on K3 radio   Richard Ferch
• [Elecraft] [K3] Macros   Richard Ferch
• [Elecraft] K3 RTTY - PSK D   Richard Ferch
• [Elecraft] K3 RTTY - PSK D   Richard Ferch
• [Elecraft] (K3) RTTY offset ?   Richard Ferch
• [Elecraft] Fw: (K3) RTTY offset ?   Richard Ferch
• [Elecraft] k3 utility problem   David Fleming
• [Elecraft] APF question   John Fritze
• [Elecraft] NR suddenly stopped working in SSB   John Fritze
• [Elecraft] NR suddenly stopped working in SSB   John Fritze
• [Elecraft] Latest Sherwood table   Dr. Werner Furlan
• [Elecraft] [K2] KAT100 + KPA100 power supply in EC2   Dr. Werner Furlan
• [Elecraft] [K2] KAT100 + KPA100 power supply in EC2   Dr. Werner Furlan
• [Elecraft] P3 with a transverter   Graham Kimbell G3TCT
• [Elecraft] Loudspeaker audio dies away after few minutes!   Nigel G3TXF
• [Elecraft] P3 Beta 0050 - Transverter issue   G3XDY
• [Elecraft] P3 Beta 0050 - Transverter issue   G3XDY
• [Elecraft] P3 with a Transverter   G3XDY
• [Elecraft] KX1 Sale   John Chappell G3XRJ
• [Elecraft] KX1 is SOLD ( n/t )   John Chappell G3XRJ
• [Elecraft] P3 suggestion   John Chappell G3XRJ
• [Elecraft] TX EQ oddity?   G4LNA
• [Elecraft] A Comment on my 500 Watt Comment   ROBERT GARCEAU
• [Elecraft] Transmitting while listening in diversity mode   Ian White GM3SEK
• [Elecraft] OT - SMT breadboarding   Ian White GM3SEK
• [Elecraft] clear RIT upon tuning in K3?   Ian White GM3SEK
• [Elecraft] P3 deaf ??   GM4KGK
• [Elecraft] CM500 Speaker / Headphone   Roger Gagos
• [Elecraft] unequal power output per tone in FSK   Hank Garretson
• [Elecraft] P3 Center Frequency   Hank Garretson
• [Elecraft] P3 Enhancement Request   W6SX Hank Garretson
• [Elecraft] K2/K3: Keyboard to CW possible with KUSB and no computer?   Gary
• [Elecraft] CM500   Gary
• [Elecraft] Firmware ftp   Gary
• [Elecraft] Fwd: A congressional reform act for 2011   Paul Gates
• [Elecraft] (no subject)   Paul Gates
• [Elecraft] K3, LP-Bridge, SteppIR BiggIR antenna   John Gaynard
• [Elecraft] K3, LP-Bridge, SteppIR BiggIR antenna   John Gaynard
• [Elecraft] Filters need new home!   Gilbert Gibbs
• [Elecraft] P3 magenta 'pointer' in display?   Stan Gibbs
• [Elecraft] P3 magenta 'pointer' in display?   Stan Gibbs
• [Elecraft] K3 Stumped.   Stan Gibbs
• [Elecraft] Elecraft support   John H Gibson
• [Elecraft] Elecraft support   John H Gibson
• [Elecraft] K3: advice about options to buy?   David Gilbert
• [Elecraft] K3 Feature Request   David Gilbert
• [Elecraft] P3 Temperature Specs   David Gilbert
• [Elecraft] K3 For Sale   John Glascock
• [Elecraft] Pixel Technologies   Ron Gould
• [Elecraft] Tips for using APF   Greg
• [Elecraft] Latest Sherwood table   Gary Gregory
• [Elecraft] ON4UN has a K3?   Gary Gregory
• [Elecraft] let's see   Gary Gregory
• [Elecraft] K3/RigExpert TI-5   Gary Gregory
• [Elecraft] RES: Yamaha CM500   Gary Gregory
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for theP3   Gary Gregory
• [Elecraft] Yamaha CM500 - Purchase from outside North America   Gary Gregory
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" modefortheP3   Gary Gregory
• [Elecraft] FS P3   Gary Gregory
• [Elecraft] P3 S meter variance   Gary Gregory
• [Elecraft] P3 FS ship worldwide   Gary Gregory
• [Elecraft] FS P3   Gary Gregory
• [Elecraft] KPA-500 vs THP   Gary Gregory
• [Elecraft] KPA-500 vs THP   Gary Gregory
• [Elecraft] KPA-500 vs THP   Gary Gregory
• [Elecraft] A Comment on my 500 Watt Comment   Gary Gregory
• [Elecraft] K3 Feature Request   Gary Gregory
• [Elecraft] Second antenna port...   Gary Gregory
• [Elecraft] K1 went out!   Stan Grigaliunas
• [Elecraft] kat2   Dan Grizzard
• [Elecraft] kat 2 t1 txfmr   Dan Grizzard
• [Elecraft] kat2 question   Dan Grizzard
• [Elecraft] k2 warping   Dan Grizzard
• [Elecraft] K2 warping   Dan Grizzard
• [Elecraft] K3 at VP8ORK   Dick Grolleman
• [Elecraft] APF effectiveness...   Chuck Guenther
• [Elecraft] APF   Chuck Guenther
• [Elecraft] [K3] Macros   Richard Squire - HB9ANM
• [Elecraft] K3 filter options   Dave Hachadorian
• [Elecraft] 250hz Filter - Audio drops   Dave Hachadorian
• [Elecraft] win 7 32/64 bit   Dave Hachadorian
• [Elecraft] OT: Spectrum defense matters   Joel R. Hallas
• [Elecraft] K3_Firmware   Bill Hammond
• [Elecraft] [K2] TX Issue in Part III checks   Brian Handy
• [Elecraft] [K2] TX Issue in Part III checks   Brian Handy
• [Elecraft] [K2] TX Issue in Part III checks   Brian Handy
• [Elecraft] [K2] Post-Mixer signal levels   Brian Handy
• [Elecraft] [K2] Post-Mixer signal levels   Brian Handy
• [Elecraft] RES: Yamaha CM500   Robert Harmon
• [Elecraft] Yamaha CM500 in stock at Sam Ash for $45 inc shipping   Robert Harmon
• [Elecraft] APF effectiveness...   Robert Harmon
• [Elecraft] APF   Robert Harmon
• [Elecraft] APF   Robert Harmon
• [Elecraft] Second antenna port...   Robert Harmon
• [Elecraft] APF Really Works   Robert Harmon
• [Elecraft] LCD TV Causing RFI   Robert Harmon
• [Elecraft] Take the plung!   Robert Harmon
• [Elecraft] Blue Tooth   Bill Harris
• [Elecraft] K3 APF Problem???   Jim Harris
• [Elecraft] K3 APF Problem   Jim Harris
• [Elecraft] Fw: K3 APF Problem   Jim Harris
• [Elecraft] Fw: K3 APF Problem   Jim Harris
• [Elecraft] K3 APF Problem   Jim Harris
• [Elecraft] K3 APF Problem   Jim Harris
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   Mike Harris
• [Elecraft] CM500 Speaker / Headphone   Mike Harris
• [Elecraft] P3 'Capture Image': Where Image Saved?   Jon K Hellan
• [Elecraft] (Very OT)Plasma TV noise   Chris Hembree
• [Elecraft] (Very OT)Plasma TV noise   Chris Hembree
• [Elecraft] Reminder: QRP-ARCI Fireside SSB Sprint Tomorrow!   Jeff Hetherington
• [Elecraft] K3 - Observations during NAQP CW   Gary Hinson
• [Elecraft] KPA500 - just 500 watts?   Gary Hinson
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] NG0R - KSB2 low audio level   John Hoaglun
• [Elecraft] Latest Sherwood table   Jan Erik Holm
• [Elecraft] Latest Sherwood table   Jan Erik Holm
• [Elecraft] Latest Sherwood table   Jan Erik Holm
• [Elecraft] (Very OT)Plasma TV noise   Jan Erik Holm
• [Elecraft] KPA500 - just 500 watts?   Jan Erik Holm
• [Elecraft] Custom engraved P3 Plates   Brett Howard
• [Elecraft] K1 Battery Solution   Brett Howard
• [Elecraft] KPA3 Fails Calibration   Bruce James Howes
• [Elecraft] KPA3 Fails Calibration   Bruce James Howes
• [Elecraft] OT: WTB K3   Ruben Navarro Huedo
• [Elecraft] K2 switch replacement   Paul Huff
• [Elecraft] "the shipping costs are $999.00" -- was "Shipping costs"   Gary Hvizdak
• [Elecraft] KPA-500 vs THP   Phil Hystad
• [Elecraft] Re： KPA-500 vs THP   Phil Hystad
• [Elecraft] KPA500 - just 500 watts?   Phil Hystad
• [Elecraft] KPA500 - just 500 watts?   Phil Hystad
• [Elecraft] KPA500 - just 500 watts?   Phil Hystad
• [Elecraft] K3 -> KPA500 -> KAT500   Phil Hystad
• [Elecraft] K3 Stumped.   Phil Hystad
• [Elecraft] Elecraft/Heil MD-2   Hunsdon Cary III
• [Elecraft] [K2] KBT2 external????   IZ2NYY
• [Elecraft] [K2] crystal filters bag discarded   IZ2NYY
• [Elecraft] K3 Amp Key configuration request   Ignacy
• [Elecraft] P3 0.50 firmware   Ignacy
• [Elecraft] P3 and averaging - dillemma or no problem?   Ignacy
• [Elecraft] K3 antenna tuner.   Ignacy
• [Elecraft] K2 Display problem during CALFIL   JONES, George
• [Elecraft] BNC adapter question   James C. Hall, MD
• [Elecraft] K3/P3 combo during ARRL RTTY RU   James C. Hall, MD
• [Elecraft] short BNC to BNC cable assembly, where to get?   George & Jan
• [Elecraft] K2 and K3 Microphone Input Impedance   George & Jan
• [Elecraft] Getting a buzz, the wrong way   George & Jan
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   George & Jan
• [Elecraft] K3: AC Hum on SSB problem   Jay
• [Elecraft] K3 AC Hum on SSB problem SOLVED   Jay
• [Elecraft] BNC adapter question   Fred Jensen
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Fred Jensen
• [Elecraft] K3 Getting a buzz, the wrong way   Fred Jensen
• [Elecraft] K3 PA Temp   Fred Jensen
• [Elecraft] K1 Battery Solution   Fred Jensen
• [Elecraft] clear RIT upon tuning in K3?   Fred Jensen
• [Elecraft] K3 - Observations during NAQP CW   Fred Jensen
• [Elecraft] portable radio recommendations wanted   Fred Jensen
• [Elecraft] P3 S meter variance   Fred Jensen
• [Elecraft] get to your local library.   Fred Jensen
• [Elecraft] KPA500 - just 500 watts?   Fred Jensen
• [Elecraft] win 7 32/64 bit   Jerry
• [Elecraft] win 7 32/64 bit   Jerry
• [Elecraft] Tips for using APF   Jim
• [Elecraft] My new K3   Joe
• [Elecraft] K3 People   Joe
• [Elecraft] Latest Sherwood table   Joe Subich, W4TV
• [Elecraft] WSPR with K3   Joe Subich, W4TV
• [Elecraft] K3 filter options   Joe Subich, W4TV
• [Elecraft] win 7 32/64 bit   Joe Subich, W4TV
• [Elecraft] WSPR with K3   Joe Subich, W4TV
• [Elecraft] Data modes issue   Joe Subich, W4TV
• [Elecraft] K3/RigExpert TI-5   Joe Subich, W4TV
• [Elecraft] unequal power output per tone in FSK   Joe Subich, W4TV
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Joe Subich, W4TV
• [Elecraft] P3 Waterfall   Joe Subich, W4TV
• [Elecraft] K3: FSK problems on K3 radio   Joe Subich, W4TV
• [Elecraft] K3: PSK31 Settings   Joe Subich, W4TV
• [Elecraft] P3 spectrum display does not follow K3 following firmware upgrade   Joe Subich, W4TV
• [Elecraft] KRC2 Question   Joe Subich, W4TV
• [Elecraft] 500Hz 5-pole vs Inrad 500Hz 8-pole?   Joe Subich, W4TV
• [Elecraft] K3 - Firmware question / QRQ   Joe Subich, W4TV
• [Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4   Joe Subich, W4TV
• [Elecraft] K2 and K3 Microphone Input Impedance   John
• [Elecraft] K2 and K3 Microphone Input Impedance   John Huggins, kx4o
• [Elecraft] K3 Power Gain Cal error   John_N1JM
• [Elecraft] k3 Utility 1.4.1.8 download problem   John_N1JM
• [Elecraft] For SaleTelepost LP-PAN LP-100 and EMU-0202 Full Set   John_N1JM
• [Elecraft] Elecraft SSB Net results (1-30-11)   John_N1JM
• [Elecraft] K3/RigExpert TI-5   Lyle Johnson
• [Elecraft] P3 S Unit Measurement   Lyle Johnson
• [Elecraft] K3 line out   Lyle Johnson
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Lyle Johnson
• [Elecraft] KDVR3 Wish List   Lyle Johnson
• [Elecraft] KDVR3 Wish List   Lyle Johnson
• [Elecraft] KPA500 with K2?   Lyle Johnson
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Lyle Johnson
• [Elecraft] K3 Amp Key configuration request   Roger D Johnson
• [Elecraft] K3 Amp Key configuration request   Roger D Johnson
• [Elecraft] New Utility Problem   Ci Jones
• [Elecraft] P3 fixed tune - no marker   Dirk Jorens
• [Elecraft] MY MAIL   Josep
• [Elecraft] Slow learner - K3   Bill Davis Jr
• [Elecraft] K3 with microwave transverter - Frequency display   Bill Davis Jr
• [Elecraft] Nabble   Julian, G4ILO
• [Elecraft] Nabble   Julian, G4ILO
• [Elecraft] Time to Move the Reflector was: Re: Nabble   Julian, G4ILO
• [Elecraft] K3 Software for RTTY   Julian, G4ILO
• [Elecraft] WSPR with K3   Julian, G4ILO
• [Elecraft] K3 Bandwidth in data mode   Julian, G4ILO
• [Elecraft] k3 cw decoder and external keyer. does it work?   Julian, G4ILO
• [Elecraft] just 500W ?   Julian, G4ILO
• [Elecraft] KPA500 - just 500 watts?   Julian, G4ILO
• [Elecraft] K3 Slow power change   Julian, G4ILO
• [Elecraft] K3 and MFJ 1026 hookup   Julian, G4ILO
• [Elecraft] OT: Exhaustive microphone connector info   Ken - K0PP
• [Elecraft] K3: very low power out with sub rx turned on   Ed K1EP
• [Elecraft] K2 BFO Drift / Filter Alignment   K1FFX
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   K1FFX
• [Elecraft] K2 BFO Drift / Filter Alignment   K1FFX
• [Elecraft] K2 BFO Drift / Filter Alignment   K1FFX
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   K1FFX
• [Elecraft] KPA100 Page 44 Resistance Measurements   K1FFX
• [Elecraft] K2 BFO Drift / Filter Alignment   K1FFX
• [Elecraft] [K2] K2, KPA100, N-GEN, W1 Construction Blog   K1FFX
• [Elecraft] [K2] K2's frequency counter cable with KPA100 installed   K1FFX
• [Elecraft] [K2] Frequency counter cable with KPA100 installed   K1FFX
• [Elecraft] [K2] KPA100 "birdie" at 21029   K1FFX
• [Elecraft] [K2] KPA100 "birdie" at 21029   K1FFX
• [Elecraft] Use of Linked Main and Sub   Rich - K1HTV
• [Elecraft] K3 Slow power change   Rich - K1HTV
• [Elecraft] FORSALE: LP-PAn   Larry K1UO
• [Elecraft] Latest Sherwood table   Guy Olinger K2AV
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Guy Olinger K2AV
• [Elecraft] Time to Move the Reflector was: Re: Nabble   Guy Olinger K2AV
• [Elecraft] K3 CW and RTTY tones   Guy Olinger K2AV
• [Elecraft] Filters and Configuration Questions   Guy Olinger K2AV
• [Elecraft] OT: "Flat" ferrite clamp-ons for window line   Guy Olinger K2AV
• [Elecraft] OT: "Flat" ferrite clamp-ons for window line   Guy Olinger K2AV
• [Elecraft] OT: LDE defined   Guy Olinger K2AV
• [Elecraft] K3: Hears stations twice   Guy Olinger K2AV
• [Elecraft] [K3] Mods missing from web page   Guy Olinger K2AV
• [Elecraft] clear RIT upon tuning in K3?   Guy Olinger K2AV
• [Elecraft] "the shipping costs are $999.00" -- was "Shipping costs"   Guy Olinger K2AV
• [Elecraft] K3 - Another push-to-talk question   Guy Olinger K2AV
• [Elecraft] KAT3 freq range   Guy Olinger K2AV
• [Elecraft] P3 0.050 Glitch?   Guy Olinger K2AV
• [Elecraft] [K3] CW transmit filter bandwith   Guy Olinger K2AV
• [Elecraft] Setting K3 default filter BW   Guy Olinger K2AV
• [Elecraft] OT: Spectrum defense matters   Guy Olinger K2AV
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Guy Olinger K2AV
• [Elecraft] KDVR3 Wish List   Guy Olinger K2AV
• [Elecraft] KDVR3 Wish List   Guy Olinger K2AV
• [Elecraft] K2: Replacement tuning knob for K2?   Guy Olinger K2AV
• [Elecraft] K2: K60XV confession of a grumpy old man   Guy Olinger K2AV
• [Elecraft] K2: Replacement tuning knob for K2?   Guy Olinger K2AV
• [Elecraft] KPA500 - just 500 watts?   Guy Olinger K2AV
• [Elecraft] APF   Guy Olinger K2AV
• [Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4   Guy Olinger K2AV
• [Elecraft] K3: very low power out with sub rx turned on   Guy Olinger K2AV
• [Elecraft] Take the plung!   Guy Olinger K2AV
• [Elecraft] Data modes issue   Larry - K2GN
• [Elecraft] Thanks to those that helped   Vic K2VCO
• [Elecraft] P3 S meter variance   Vic K2VCO
• [Elecraft] P3 ver 1.00   Vic K2VCO
• [Elecraft] KPA500 - just 500 watts?   Vic K2VCO
• [Elecraft] KPA500 - just 500 watts?   Vic K2VCO
• [Elecraft] Dollars per watt   Vic K2VCO
• [Elecraft] [K2] K2's frequency counter cable with KPA100 installed   Vic K2VCO
• [Elecraft] [K3] KXV3A   Vic K2VCO
• [Elecraft] K3 and MFJ 1026 hookup   Vic K2VCO
• [Elecraft] K3 and MFJ 1026 hookup   Vic K2VCO
• [Elecraft] K3 and MFJ 1026 hookup   Vic K2VCO
• [Elecraft] K3 APF Problem???   Vic K2VCO
• [Elecraft] Fw: K3 APF Problem   Vic K2VCO
• [Elecraft] K3 - RF Gain Calibration Error   Ken K3IU
• [Elecraft] K3 - RF Gain Calibration Error   Ken K3IU
• [Elecraft] K3 Speaker Out? and P3 ?   K3RWN
• [Elecraft] K-3: Unswitched Rx Ant   K5WA
• [Elecraft] short BNC to BNC cable assembly, where to get?   Lew Phelps K6LMP
• [Elecraft] short BNC to BNC cable assembly, where to get?   Lew Phelps K6LMP
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   Lew Phelps K6LMP
• [Elecraft] KRC2 Question   Lew Phelps K6LMP
• [Elecraft] P3 0.050 Glitch?   K7WIA
• [Elecraft] P3 0.050 Glitch?   K7WIA
• [Elecraft] P3 0.050 Glitch?   K7WIA
• [Elecraft] ref in a pile up.   Gary K9GS
• [Elecraft] win 7 32/64 bit   Bill K9YEQ
• [Elecraft] P3 0.050 Glitch?   Bill K9YEQ
• [Elecraft] P3 and xvtr band   Bill K9YEQ
• [Elecraft] 120 vs 240   Bill K9YEQ
• [Elecraft] KPA500 - just 500 watts?   Bill K9YEQ
• [Elecraft] K1KG Fwd: P3/K3 Transverter Cursor Operation   Bill K9YEQ
• [Elecraft] ANT2 port w/o Tuner   Bill K9YEQ
• [Elecraft] K3 - RF Gain Calibration Error   K9ZTV
• [Elecraft] APF effectiveness...   K9ZTV
• [Elecraft] K2 SSB Receive issue   KA1YMX
• [Elecraft] K2 SSB Receive issue   KA1YMX
• [Elecraft] K2 SSB Receive issue   KA1YMX
• [Elecraft] K2 SSB Receive issue   KA1YMX
• [Elecraft] K2 SSB Receive issue   KA1YMX
• [Elecraft] [K3] KAT3 Hiccup   KD0Q-Glenn
• [Elecraft] Blue Tooth   KE4INM
• [Elecraft] Elecraft SSB net report for Jan. 9, 2011   Phil Kane
• [Elecraft] Replacement tuning knob for K2?   Alexey Kats
• [Elecraft] Blue Tooth   Max Kempson
• [Elecraft] K2 & Power Line Noise   L Kendall
• [Elecraft] KNB2 Installed, but...   L Kendall
• [Elecraft] KNB2 Installed, but...   L Kendall
• [Elecraft] K2 & Power Line Noise   Larry Kendall
• [Elecraft] For Sale FM Roofing Filters for K3   Kermit
• [Elecraft] Sold FM Roofing Filters   Kermit
• [Elecraft] For Sale W2 Wattmeter with HF/6M 2KW Coupler   Kermit
• [Elecraft] For SaleTelepost LP-PAN LP-100 and EMU-0202 Full Set   Kermit
• [Elecraft] SOLD W2 Wattmeter with HF/6M 2KW Coupler   Kermit
• [Elecraft] SOLD Telepost LP-PAN LP-100 and EMU-0202 Full Set   Kermit
• [Elecraft] K2 speaker/headphones switching.   Christopher Kimball
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   Koppendorfer Klaus
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Koppendorfer Klaus
• [Elecraft] Curious phenomenon with doublet on 80m   Igor Kosvin
• [Elecraft] Curious phenomenon with doublet on 80m   Igor Kosvin
• [Elecraft] Curious phenomenon with doublet on 80m   Igor Kosvin
• [Elecraft] K3 Curious phenomenon with doublet on 80m - solved!   Igor Kosvin
• [Elecraft] K3 Amp Key configuration request   Igor Kosvin
• [Elecraft] CM500   Igor Kosvin
• [Elecraft] K3 Manual iTunes   Phil LaMarche
• [Elecraft] OT: LDE defined   Phil LaMarche
• [Elecraft] KPA-500 vs THP   Darin Land
• [Elecraft] [K3] Err 12v   Hardy Landskov
• [Elecraft] K2/K3: Keyboard to CW possible with KUSB and no computer?   David Lankshear
• [Elecraft] APF ringing   Bob Lanning
• [Elecraft] APF effectiveness...   Bob Lanning
• [Elecraft] APF Really Works   Elliott Lawrence
• [Elecraft] APF   David Lear
• [Elecraft] test   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] BNC adapter question   John Lemay
• [Elecraft] KPA500 - just 500 watts?   Richard S. Lindzen
• [Elecraft] KPA500 - just 500 watts?   Brian Linn
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] Data modes issue   Jim Littlefield
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   OZ2BRN Brian Lodahl
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   OZ2BRN Brian Lodahl
• [Elecraft] ON4UN has a K3?   OZ2BRN Brian Lodahl
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   OZ2BRN Brian Lodahl
• [Elecraft] K2 / KPA100 - net shorted on KPA100 --> C31 / D13 ... failure modes ?   OZ2BRN Brian Lodahl
• [Elecraft] K2 / KPA100 - net shorted on KPA100 --> C31 / D13 ... failure modes ?   OZ2BRN Brian Lodahl
• [Elecraft] [P3] VFO A cursor shifts after TUNE   Al Lorona
• [Elecraft] P3 S meter variance   Al Lorona
• [Elecraft] Replacement tuning knob for K2?   Jim Lowman
• [Elecraft] AF-1: First Impressions   Kevin Luxford
• [Elecraft] Blue Tooth   Kevin Luxford
• [Elecraft] KRC2 and Kenwood TS-590   Maarten
• [Elecraft] K3 for sale   Maarten
• [Elecraft] P3 'Capture Image': Where Image Saved?   Jeff Maass
• [Elecraft] P3 'Capture Image': Where Image Saved?   Jeff Maass
• [Elecraft] Problem Solved - K3 to USB/Serial On Macbook - Info Below   Frank MacDonell
• [Elecraft] A vote of thanks to Don...   Frank MacDonell
• [Elecraft] K3 For Sale   Jim MacKenzie
• [Elecraft] P3 0.050 Glitch?   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 SSB Receive issue   Geoffrey Mackenzie-Kennedy
• [Elecraft] [K2] KPA100 "birdie" at 21029   Geoffrey Mackenzie-Kennedy
• [Elecraft] Taken the plunge!   Geoffrey Mackenzie-Kennedy
• [Elecraft] Zero Beat   Geoffrey Mackenzie-Kennedy
• [Elecraft] About DVR   Fabio Mantovani
• [Elecraft] Taken the plunge!   Leroy Marion
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] UK Elecraft Net   Ian Maude
• [Elecraft] Shipping costs   Rob May
• [Elecraft] K3: Power puzzlement   Rob May
• [Elecraft] Time-Out Timer   Miguel Mayorga
• [Elecraft] Fixed Tune   Jim McCook
• [Elecraft] [K3] Macros   Jim McDonald
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   Brian McInerney
• [Elecraft] K-3 turning on ESSB   Bruce McLaughlin
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   Bruce McLaughlin
• [Elecraft] P3 fixed tune - no marker   Chris Meagher
• [Elecraft] K3 - Firmware question / QRQ   Bruce Meier
• [Elecraft] K3 - Firmware question / QRQ   Bruce Meier
• [Elecraft] win 7 32/64 bit   Mike
• [Elecraft] win 7 32/64 bit   Mike
• [Elecraft] WSPR with K3   Mike
• [Elecraft] win 7 32/64 bit ... caution needed...   Mike
• [Elecraft] Antenna   Mike
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for the P3   Mike
• [Elecraft] K3 PA Temp   Milton
• [Elecraft] K3 PA Temp   Milton
• [Elecraft] WSPR with K3   Brendan Minish
• [Elecraft] K3 for sale   Brendan Minish
• [Elecraft] K3 Feature Request   Brendan Minish
• [Elecraft] Take the plung!   Brendan Minish
• [Elecraft] KAT3 freq range   Gary Mohrlant
• [Elecraft] K2/K3: Keyboard to CW possible with KUSB and no computer?   Andrew Moore
• [Elecraft] K2/K3: Keyboard to CW possible with KUSB and no computer?   Andrew Moore
• [Elecraft] K2 warping   Andrew Moore
• [Elecraft] K3: Power puzzlement   Andrew Moore
• [Elecraft] just 500W ?   Andrew Moore
• [Elecraft] K2: Questions on tilt stands: 1.5" vs 3"   Andrew Moore
• [Elecraft] tilt stands...   Andrew Moore
• [Elecraft] tilt stands...   Andrew Moore
• [Elecraft] win 7 32/64 bit   Randy Moore
• [Elecraft] [K3] Err 12v   Randy Moore
• [Elecraft] [K3] ERR 12v   Randy Moore
• [Elecraft] [K3] ERR 12v   Randy Moore
• [Elecraft] (Very OT)Plasma TV noise   Brian Moran
• [Elecraft] K3 APF comparison, HR2DMR   Brian Moran
• [Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4   Brian Moran
• [Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4   Brian Moran
• [Elecraft] BNC adapter question   Sam Morgan
• [Elecraft] Custom engraved P3 Plates   Sam Morgan
• [Elecraft] Custom engraved P3 Plates   Sam Morgan
• [Elecraft] Custom engraved P3 Plates   Sam Morgan
• [Elecraft] [K3] K3 Utility settings for CW filters   Sam Morgan
• [Elecraft] [K3] Matching 5 pole filters in main and KRX3   Sam Morgan
• [Elecraft] P3 S meter variance   Sam Morgan
• [Elecraft] Take the plung!   Sam Morgan
• [Elecraft] Teleloops   Bud Morin
• [Elecraft] [P3] VFO A cursor shifts after TUNE   Roy Morris
• [Elecraft] P3 S Unit Measurement   Roy Morris
• [Elecraft] P3 S meter variance   Roy Morris
• [Elecraft] P3 S meter variance   Roy Morris
• [Elecraft] KDVR3 Wish List   Roy Morris
• [Elecraft] K3 Power puzzlement   Mike Morrow
• [Elecraft] just 500W ?   Nelson Moyer
• [Elecraft] Taken the plunge!   Jerry Muller
• [Elecraft] Take the plung!   Jerry Muller
• [Elecraft] Take the plung!   Jerry Muller
• [Elecraft] K3 TX spurs?   Willard Myers
• [Elecraft] Nabble   Barry N1EU
• [Elecraft] Time to Move the Reflector was: Re: Nabble   Barry N1EU
• [Elecraft] 250hz Filter - Audio drops   Barry N1EU
• [Elecraft] [K3] Matching 5 pole filters in main and KRX3   Barry N1EU
• [Elecraft] K3 line out   Barry N1EU
• [Elecraft] K3 line out   Barry N1EU
• [Elecraft] Line Audio Output Mod   Barry N1EU
• [Elecraft] K3 Lin Out -- Need a hint for trouble-shooting   Barry N1EU
• [Elecraft] [k3] Audio distortion on strong CW signals - after a while   Barry N1EU
• [Elecraft] WTB: KFL3B-FM 13Khz filters for K3   Barry N1EU
• [Elecraft] APF ringing   Barry N1EU
• [Elecraft] K3: APF effectiveness   Barry N1EU
• [Elecraft] APF   Barry N1EU
• [Elecraft] APF   Barry N1EU
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Barry N1EU
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Barry N1EU
• [Elecraft] mini coax jumpers (aka TMP cables)   Barry N1EU
• [Elecraft] mini coax jumpers (aka TMP cables)   Barry N1EU
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" modefortheP3   N2TK, Tony
• [Elecraft] KPA500 - just 500 watts?   N2TK, Tony
• [Elecraft] K3 Stumped.   N2TK, Tony
• [Elecraft] K3 at VP8ORK   N2TK, Tony
• [Elecraft] win 7 32/64 bit   Paul at N4LCD.com
• [Elecraft] K3 10W dual receivers current?   Ross Primrose N4RP
• [Elecraft] FW: K3 Feature Request   Ross Primrose N4RP
• [Elecraft] K2 MDS numbers off   Brian - N5BCN
• [Elecraft] K2 MDS numbers off   Brian - N5BCN
• [Elecraft] K2 MDS numbers off   Brian - N5BCN
• [Elecraft] [K2] KAT2 and KAT100 living happily together?   Brian - N5BCN
• [Elecraft] [K2] Two mic cables into K2   Brian - N5BCN
• [Elecraft] LCD TV Causing RFI   Brian - N5BCN
• [Elecraft] LCD TV Causing RFI   Brian - N5BCN
• [Elecraft] LCD TV Causing RFI   Brian - N5BCN
• [Elecraft] win 7 32/64 bit   Amateur Radio Operator N5GE
• [Elecraft] K3: advice about options to buy?   Amateur Radio Operator N5GE
• [Elecraft] [P3] Filter Width Brackets   Amateur Radio Operator N5GE
• [Elecraft] K3: options to buy: a summary of what I learnt from you all...   Amateur Radio Operator N5GE
• [Elecraft] OT: LDE defined   Amateur Radio Operator N5GE
• [Elecraft] XV smokin' hot   Amateur Radio Operator N5GE
• [Elecraft] K3 Power Gain Cal error   Amateur Radio Operator N5GE
• [Elecraft] K3 Getting warm   Amateur Radio Operator N5GE
• [Elecraft] P3 Panadapter   Amateur Radio Operator N5GE
• [Elecraft] K3 - RF Gain Calibration Error   Amateur Radio Operator N5GE
• [Elecraft] P3 S meter variance   Amateur Radio Operator N5GE
• [Elecraft] KDVR3 Wish List   Amateur Radio Operator N5GE
• [Elecraft] get to your local library.   Amateur Radio Operator N5GE
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   Amateur Radio Operator N5GE
• [Elecraft] mini coax jumpers (aka TMP cables)   Amateur Radio Operator N5GE
• [Elecraft] Ref Osc calibration question   Amateur Radio Operator N5GE
• [Elecraft] Second RX and KBPF3   Milt -- N5IA
• [Elecraft] K3 - Another push-to-talk question   N5NA
• [Elecraft] K3: Power puzzlement   N5NA
• [Elecraft] K3 PA temp widely varying & ERR12v   Ron N5QQ
• [Elecraft] K2 and PSK-31 on iPAD - Alpha demo   Larry 'Rebar' Rebarchik - N6CCH
• [Elecraft] WSPR with K3   Iain MacDonnell - N6ML
• [Elecraft] N1MM and K3 always on transmit problem   Iain MacDonnell - N6ML
• [Elecraft] K3 - Observations during NAQP CW   Iain MacDonnell - N6ML
• [Elecraft] CM500 Speaker / Headphone   Iain MacDonnell - N6ML
• [Elecraft] KPA500 Question   Bud Semon N7CW
• [Elecraft] K3 power switching   N7US
• [Elecraft] K3 power switching   N7US
• [Elecraft] Problems with HRD, Windows 7 and the old, Serial converter cable using the PROLIFIC chip set   Carl N9GC
• [Elecraft] NAQCC Sprint Wednesday night!   NAQCC
• [Elecraft] ON4UN has a K3?   NJ3K
• [Elecraft] K3 - Another push-to-talk question   Rich NU6T
• [Elecraft] KPA500 - just 500 watts?   Rich NU6T
• [Elecraft] win 7 32/64 bit   Bob Naumann
• [Elecraft] Filters and Configuration Questions   Bob Naumann
• [Elecraft] A congressional reform act for 2011   Bob Naumann
• [Elecraft] K3/RigExpert TI-5   Bob Naumann
• [Elecraft] K3/RigExpert TI-5   Bob Naumann
• [Elecraft] KPA-500 vs THP   Bob Naumann
• [Elecraft] K3 Feature Request   Bob Naumann
• [Elecraft] Time-Out Timer   Don Nelson
• [Elecraft] short BNC to BNC cable assembly, where to get?   Don Nesbitt
• [Elecraft] N2CQ QRP Contest Calendar: Jan 8 - Feb 8 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Jan 14 - Feb 14, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Jan 19 - Feb 21, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Jan 26 - Feb 25, 2011   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Jan27 - Feb 25, 2011 (Corrections)   Ken Newman
• [Elecraft] Take the plung!   Nick-WA5BDU
• [Elecraft] K3: Hears stations twice   OE5CSP-Chris
• [Elecraft] P3 FS   ORIN G. HELVEY,JR.
• [Elecraft] P3 FS   ORIN G. HELVEY,JR.
• [Elecraft] K3: overload protection with multiple rigs on same band?   Frank R. Oppedijk
• [Elecraft] K3 Utility for MAC   Oscar, WB5GCX
• [Elecraft] Text Decode on P3 screen?   Oscar, WB5GCX
• [Elecraft] K3 filter options   Arie Kleingeld PA3A
• [Elecraft] [K3] K3 Utility settings for CW filters   Arie Kleingeld PA3A
• [Elecraft] ON4UN has a K3?   Arie Kleingeld PA3A
• [Elecraft] K3: advice about options to buy?   Arie Kleingeld PA3A
• [Elecraft] Transmitting while listening in diversity mode   Arie Kleingeld PA3A
• [Elecraft] K3 RTTY - PSK D   Arie Kleingeld PA3A
• [Elecraft] K3 RTTY - PSK D   Arie Kleingeld PA3A
• [Elecraft] K3 RTTY - PSK D   Arie Kleingeld PA3A
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Arie Kleingeld PA3A
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Arie Kleingeld PA3A
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Arie Kleingeld PA3A
• [Elecraft] APF measurements: FW 4.17 vs FW4.25 revisited   Arie Kleingeld PA3A
• [Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4   Arie Kleingeld PA3A
• [Elecraft] K3: APF effectiveness   PTA_ABD
• [Elecraft] receivers performance data   Hector Padron
• [Elecraft] Latest Sherwood table   Hector Padron
• [Elecraft] K3 PA Temp   Hector Padron
• [Elecraft] RES: Yamaha CM500   Hector Padron
• [Elecraft] RES: Yamaha CM500   Hector Padron
• [Elecraft] Yamaha CM500 in stock at Sam Ash for $45 inc shipping   Hector Padron
• [Elecraft] Yamaha CM500 in stock at Sam Ash for $45 inc shipping   Hector Padron
• [Elecraft] K3 People   Hector Padron
• [Elecraft] About DVR   Hector Padron
• [Elecraft] just 500W ?   Hector Padron
• [Elecraft] just 500W ?   Hector Padron
• [Elecraft] K-3 turning on ESSB   Dale Parfitt
• [Elecraft] Latest Firmware Download for K3 fails   Dale Parfitt
• [Elecraft] P3 ver 1.00   Dale Parfitt
• [Elecraft] APF effectiveness...   Dale Parfitt
• [Elecraft] P3 fixed tune - no marker   Dale Parfitt
• [Elecraft] ERR 12V   Ralph Parker
• [Elecraft] K3: Power puzzlement   Ralph Parker
• [Elecraft] K3 Power puzzlement   Ralph Parker
• [Elecraft] K3: APF effectiveness   Ralph Parker
• [Elecraft] K3: ERR 12V vs current draw   Ralph Parker
• [Elecraft] RES: K3 filter options   Adriano Perazio
• [Elecraft] RX antenna (K3)   Adriano Perazio
• [Elecraft] K2: RF Feedback Distortion Problem   Jon Perelstein
• [Elecraft] K2: RF Feedback Distortion Problem   Jon Perelstein
• [Elecraft] [KX1] For Sale KX-1   Daniel Paul Perez
• [Elecraft] [OT] For Sale Wilderness NorCal 40A   Daniel Paul Perez
• [Elecraft] K3 PA Temp   Dave Perry
• [Elecraft] help with DX4WIN   Dave Perry
• [Elecraft] P3 0.050 Glitch?   Dave Perry
• [Elecraft] KPA500 - just 500 watts?   Dave Perry
• [Elecraft] win 7 32/64 bit   Doug Person
• [Elecraft] FS: K2/10   Doug Person
• [Elecraft] KPA-500 vs THP   Doug Person
• [Elecraft] mini coax jumpers (aka TMP cables)   Peter
• [Elecraft] K2 MDS numbers off   DL2FI. Peter
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Dr. Detlef Petrausch
• [Elecraft] APF   Dr. Detlef Petrausch
• [Elecraft] K3, LP-Bridge, SteppIR BiggIR antenna   Larry Phipps
• [Elecraft] Filters and Configuration Questions   Joe Planisky
• [Elecraft] OT - SMT breadboarding   Joe Planisky
• [Elecraft] K3 PA Temp   Joe Planisky
• [Elecraft] K3 PA temp widely varying & ERR12v   Joe Planisky
• [Elecraft] Shipping costs   Joe Planisky
• [Elecraft] K3: Power puzzlement   Joe Planisky
• [Elecraft] K3 Power puzzlement   Joe Planisky
• [Elecraft] Line Audio Output Mod   Joe Planisky
• [Elecraft] More confusion   Joe Planisky
• [Elecraft] More confusion   Joe Planisky
• [Elecraft] KPA3 Fails Calibration   Joe Planisky
• [Elecraft] 500Hz 5-pole vs Inrad 500Hz 8-pole?   Joe Planisky
• [Elecraft] K3 build sequence   Joe Planisky
• [Elecraft] WIll the K3 PTT work with HRD?   Rob at Peg Pohorence
• [Elecraft] P3 0.050 Glitch?   David Pratt
• [Elecraft] K2: 40m bandpass filter   David Pratt
• [Elecraft] K2: 40m bandpass filter   David Pratt
• [Elecraft] K3 internal 2 meter xvtr s meter   David Pratt
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   David Pratt
• [Elecraft] KPA500 - just 500 watts?   David Pratt
• [Elecraft] KX1 - Display partially works   K Price
• [Elecraft] 500Hz 5-pole vs Inrad 500Hz 8-pole?   Ross Primrose
• [Elecraft] [K2] Just a confirm about KIO2   Ross Primrose
• [Elecraft] 500Hz 5-pole vs Inrad 500Hz 8-pole?   Ross Primrose
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Stephen Prior
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Stephen Prior
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Stephen Prior
• [Elecraft] [P3] VFO A cursor shifts after TUNE   Stephen Prior
• [Elecraft] Taken the plunge!   Dale Putnam
• [Elecraft] Zero Beat   Dale Putnam
• [Elecraft] K2-7006 KPA100 is on the way   JAMES ROGERS
• [Elecraft] [K2] KAT2 and KAT100 living happily together?   JAMES ROGERS
• [Elecraft] K3 Bandwidth in data mode   JAMES ROGERS
• [Elecraft] K2: K60XV confession of a grumpy old man   JAMES ROGERS
• [Elecraft] K2: Replacement tuning knob for K2?   JAMES ROGERS
• [Elecraft] K2: New knob   JAMES ROGERS
• [Elecraft] K2: Replacement tuning knob for K2?   JAMES ROGERS
• [Elecraft] KPA500 - just 500 watts?   JAMES ROGERS
• [Elecraft] KDSP2   Cristian Radulescu
• [Elecraft] KDSP2   Cristian Radulescu
• [Elecraft] [Bulk] ssb module or atu first?   John Ragle
• [Elecraft] Please observe...   John Ragle
• [Elecraft] K3: advice about options to buy?   John Ragle
• [Elecraft] win 7 32/64 bit ... caution needed...   John Ragle
• [Elecraft] WSPR with K3   John Ragle
• [Elecraft] K2 warping   John Ragle
• [Elecraft] K3 antenna tuner...   John Ragle
• [Elecraft] cw keyboard?   John Ragle
• [Elecraft] K3 Lin Out -- Need a hint for trouble-shooting   John Ragle
• [Elecraft] KPA500 - just 500 watts?   John Ragle
• [Elecraft] KPA500 - just 500 watts?   John Ragle
• [Elecraft] just 500 watts?   John Ragle
• [Elecraft] My opinion ..KPA 500   John Ragle
• [Elecraft] Second antenna port...   John Ragle
• [Elecraft] tilt stands...   John Ragle
• [Elecraft] P3 Utility not connecting   Robert Redmon
• [Elecraft] unequal power output per tone in FSK   Robert Redmon
• [Elecraft] K3 internal 2 meter xvtr s meter   Robert Redmon
• [Elecraft] Problems with HRD, Windows 7 and the old Serial converter cable using the PROLIFIC chip set   Robert Redmon
• [Elecraft] P3 and xvtr band   Robert Redmon
• [Elecraft] FS: K2   David F. Reed
• [Elecraft] K3 Phone Output On RP Less Than Front Panel   Jack Regan
• [Elecraft] K3 - New Beta Firmware?   John E. Reiser
• [Elecraft] (no subject)   Jim Rhodes
• [Elecraft] K3 Spot Tone Level   Richard
• [Elecraft] K3: APF effectiveness   Robby.VY2SS
• [Elecraft] [k3] Audio distortion on strong CW signals - after a while   Robby.VY2SS
• [Elecraft] [k3] Audio distortion on strong CW signals - after a while   Robby.VY2SS
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Ken Roberson
• [Elecraft] K3_Firmware   Ken Roberson
• [Elecraft] K3_FW   Ken Roberson
• [Elecraft] Data modes issue   Ken Roberson
• [Elecraft] Data modes issue   Ken Roberson
• [Elecraft] Data modes issue   Ken Roberson
• [Elecraft] P3 Panadapter   Ken Roberson
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for January 2nd & 3rd, 2011   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for January 9th & 10th, 2011   Kevin Rock
• [Elecraft] K2 warping   Kevin Rock
• [Elecraft] ec2 computer   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] P3 S meter variance   Kevin Rock
• [Elecraft] get to your local library.   Kevin Rock
• [Elecraft] get to your local library.   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] KPA500 - just 500 watts?   Kevin Rock
• [Elecraft] KPA500 - just 500 watts?   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] help with DX4WIN   Wayne Rogers
• [Elecraft] help with DX4WIN   Wayne Rogers
• [Elecraft] help with DX4WIN   Wayne Rogers
• [Elecraft] K3 build sequence   Dwayne Rohmer
• [Elecraft] K3 build sequence   Dwayne Rohmer
• [Elecraft] K3 build sequence   Dwayne Rohmer
• [Elecraft] K3 PA Temp   Lu Romero
• [Elecraft] K3: FSK problems on K3 radio   Lu Romero
• [Elecraft] KPA500 - just 500 watts?   Lu Romero
• [Elecraft] K3 Amp Key configuration request   Luis V. Romero
• [Elecraft] Transmitting while listening in diversity mode   Rose
• [Elecraft] Correction: Transmitting while listening in diversity mode   Rose
• [Elecraft] K3 TX spurs?   Rose
• [Elecraft] K3 - Re-programming unused front panel buttons?   Eric Rosenberg
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Russ
• [Elecraft] (Very OT)Plasma TV noise   Don S
• [Elecraft] KPA500   Jan Holmer SM6TUW
• [Elecraft] K3: PSK31 Settings   JA STAPLES
• [Elecraft] K3 Amp Key configuration request   Phil & Debbie Salas
• [Elecraft] k3 tuning power question   Phil & Debbie Salas
• [Elecraft] K3 Amp Key configuration request   Ed Schuller
• [Elecraft] Setting K3 default filter BW   Scott Dickson, W5WZ
• [Elecraft] Setting K3 default filter BW   Scott Dickson, W5WZ
• [Elecraft] P3 S meter variance   Mike Scott
• [Elecraft] Blue Tooth   Mike Scott
• [Elecraft] Nabble   Dave Sergeant
• [Elecraft] K2 BFO Drift / Filter Alignment   Dave Sergeant
• [Elecraft] OT: LDE defined   Dave Sergeant
• [Elecraft] A congressional reform act for 2011   Dave Sergeant
• [Elecraft] ERR 12V   Dave Sergeant
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   Dave Sergeant
• [Elecraft] Blue Tooth   Dave Sergeant
• [Elecraft] 120 vs 240   Dave Sergeant
• [Elecraft] Taken the plunge!   Dave Sergeant
• [Elecraft] Take the plung!   Dave Sergeant
• [Elecraft] kat2   Byron Servies
• [Elecraft] [K2] K2, KPA100, N-GEN, W1 Construction Blog   Byron Servies
• [Elecraft] KPA-500 vs THP   Byron Servies
• [Elecraft] [K2] KDSP2 settings for CW   John Shadle
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   John Shadle
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   John Shadle
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   John Shadle
• [Elecraft] [K2] where there's the smell of smoke...   John Shadle
• [Elecraft] [K2] where there's the smell of smoke...   John Shadle
• [Elecraft] [K2] where there's the smell of smoke...   John Shadle
• [Elecraft] [K2] where there's the smell of smoke...   John Shadle
• [Elecraft] K3: options to buy: a summary of what I learnt from you all...   Chuck Shefflette
• [Elecraft] P3 Waterfall   Chuck Shefflette
• [Elecraft] K3--CAT IS command will shift IF while in TX   Jim Sheldon
• [Elecraft] Wierd Happenings K3/P3   Jim Sheldon
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   Jim Sheldon
• [Elecraft] K3, using the Yamaha CM-500   Jim Sheldon
• [Elecraft] K3 and Yamaha CM-500   Jim Sheldon
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Jim Sheldon
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Jim Sheldon
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Jim Sheldon
• [Elecraft] just 500W ?   Jim Sheldon
• [Elecraft] P3 Commands in a K3 Macro?   Jim Sheldon
• [Elecraft] P3 Commands in a K3 Macro?   Jim Sheldon
• [Elecraft] K3: APF effectiveness   Jim Sheldon
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB net announcement - Happy New Year   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (1-2-11)   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (1-30-11)   Phillip Shepard
• [Elecraft] Selling my K2   Neil Shubert
• [Elecraft] Elecraft [K3][APF] BU2AW   Monty Shultes
• [Elecraft] KPA500 - just 500 watts?   Monty Shultes
• [Elecraft] "the shipping costs are $999.00" -- was "Shipping costs"   Jay Sissom
• [Elecraft] WTB - KRX3   Johnny Siu
• [Elecraft] BNC adapter question   Johnny Siu
• [Elecraft] Installing PR6 pre-amp inside the K3   Johnny Siu
• [Elecraft] K2-7006 KPA100 is on the way   Johnny Siu
• [Elecraft] K3: advice about options to buy?   Johnny Siu
• [Elecraft] advice about options to buy?   Johnny Siu
• [Elecraft] K2 & Power Line Noise   Johnny Siu
• [Elecraft] WTB : PR6 - 6 m pre-amp   Johnny Siu
• [Elecraft] Re： Solved - XV144, XV222, XV432   Johnny Siu
• [Elecraft] KAT500   Johnny Siu
• [Elecraft] OT: Spectrum defense matters   Johnny Siu
• [Elecraft] OT: Spectrum defense matters   Johnny Siu
• [Elecraft] Elecraft support   Johnny Siu
• [Elecraft] P3 Waterfall   Johnny Siu
• [Elecraft] KPA-500 vs THP   Johnny Siu
• [Elecraft] Re： KPA-500 vs THP   Johnny Siu
• [Elecraft] KPA-500 vs THP   Johnny Siu
• [Elecraft] KPA500 - just 500 watts?   Johnny Siu
• [Elecraft] KPA500 - just 500 watts?   Johnny Siu
• [Elecraft] Info and WTB: HF mini-beam or Hex Beam   Niel Skousen
• [Elecraft] K3: advice about options to buy?   Craig D. Smith
• [Elecraft] K3: advice about options to buy?   Craig D. Smith
• [Elecraft] K3 - Observations during NAQP CW   Craig D. Smith
• [Elecraft] K3 - Observations during NAQP CW   Craig D. Smith
• [Elecraft] RX antenna (K3)   Craig D. Smith
• [Elecraft] P3 spurious display   Craig D. Smith
• [Elecraft] K3 Power puzzlement   Craig D. Smith
• [Elecraft] K3 Power puzzlement   Craig D. Smith
• [Elecraft] P3 version 1.00 firmware   Craig D. Smith
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Craig D. Smith
• [Elecraft] P3 magenta 'pointer' in display?   Craig D. Smith
• [Elecraft] [K3] CW transmit filter bandwith   Graham Smith
• [Elecraft] BNC adapter question   Jack Smith
• [Elecraft] OT - SMT breadboarding   Jack Smith
• [Elecraft] OT: "Flat" ferrite clamp-ons for window line   Jack Smith
• [Elecraft] Transmitting while listening in diversity mode   Jack Smith
• [Elecraft] Transmitting while listening in diversity mode   Jack Smith
• [Elecraft] Time to Move the Reflector was: Re: Nabble   Pete Smith
• [Elecraft] Moving the Reflector   Pete Smith
• [Elecraft] [k3] Audio distortion on strong CW signals - after a while   Pete Smith
• [Elecraft] [k3] Audio distortion on strong CW signals - after a while   Pete Smith
• [Elecraft] KPA500 - just 500 watts?   Pete Smith
• [Elecraft] KPA500 - just 500 watts?   Pete Smith
• [Elecraft] K3: APF effectiveness   Pete Smith
• [Elecraft] [P3] Feature request   Trevor Smithers
• [Elecraft] K3 Stumped.   Dohn Smythe
• [Elecraft] One more thing   Dohn Smythe
• [Elecraft] K3 Stumped.   Dohn Smythe
• [Elecraft] Encoder was no good   Dohn Smythe
• [Elecraft] Re： KPA-500 vs THP   Igor Sokolov
• [Elecraft] KPA500 - just 500 watts?   Igor Sokolov
• [Elecraft] [K2] RF Board c228 broken!!   Giuseppe Sorrentino
• [Elecraft] [K2] RF Board: R115 resistance check   Giuseppe Sorrentino
• [Elecraft] [K2] Just a confirm about KIO2   Giuseppe Sorrentino
• [Elecraft] short BNC to BNC cable assembly, where to get?   Jim Spears
• [Elecraft] short BNC jumpers   Jim Spears
• [Elecraft] K3 Second antenna port   Rick Stealey
• [Elecraft] For sale: K2/10 SN 5251 including panadapter downconverter   Bill Stewart
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Wes Stewart
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Wes Stewart
• [Elecraft] K3 CW and RTTY tones   Wes Stewart
• [Elecraft] K3 CW and RTTY tones   Wes Stewart
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Wes Stewart
• [Elecraft] K3 Software for RTTY   Wes Stewart
• [Elecraft] K3 Software for RTTY   Wes Stewart
• [Elecraft] KPA-500 vs THP   Wes Stewart
• [Elecraft] just 500W ?   Wes Stewart
• [Elecraft] test   R. Kevin Stover
• [Elecraft] [KX1] Xmit frequency differs from display on one band   Chip Stratton
• [Elecraft] [KX1] Power drops after a few minutes of CW xmitting   Chip Stratton
• [Elecraft] [KX1] Power drops after a few minutes of CW xmitting   Chip Stratton
• [Elecraft] [KX1] Power drops after a few minutes of CW xmitting   Chip Stratton
• [Elecraft] AF1: First Impressions   Robert G. Strickland
• [Elecraft] AF1: First Impressions   Robert G. Strickland
• [Elecraft] order of assembly   R Stanley Sutton
• [Elecraft] Data modes issue   don Swetzig
• [Elecraft] Time to Move the Reflector was: Re: Nabble   Bill Tippett
• [Elecraft] K2 #1264 with a bunch of options for sale.   Phil Townsend
• [Elecraft] K2 # 1264 with lots of options...for sale   Phil Townsend
• [Elecraft] For Sale... K2 with lots of options   Phil Townsend
• [Elecraft] Center Line Missing on P3   Charles R Tropp
• [Elecraft] Center Line Missing on P3   Charles R Tropp
• [Elecraft] ON4UN has a K3?   Doug Turnbull
• [Elecraft] Take the plung!   Doug Turnbull
• [Elecraft] Help - XV432 output pwr drops   Colin VE3MSC
• [Elecraft] XV smokin' hot   Colin VE3MSC
• [Elecraft] XV smokin' hot   Colin VE3MSC
• [Elecraft] XV smokin' hot - no longer   Colin VE3MSC
• [Elecraft] Solved - XV144, XV222, XV432   Colin VE3MSC
• [Elecraft] K3 - Another push-to-talk question   Doug VE3VS
• [Elecraft] K3 and MFJ 1026 hookup   VE3WDM
• [Elecraft] K3 and MFJ 1026 hookup   VE3WDM
• [Elecraft] K3 and MFJ 1026 hookup   VE3WDM
• [Elecraft] BNC adapter question   Jeff Cochrane - VK4BOF
• [Elecraft] BNC adapter question   Jeff Cochrane - VK4BOF
• [Elecraft] P3 question   Jeff Cochrane - VK4BOF
• [Elecraft] K3 losing RF power   Jeff Cochrane - VK4BOF
• [Elecraft] K3: options to buy: a summary of what I learnt fromyou all...   Jeff Cochrane - VK4BOF
• [Elecraft] K3 internal 2 meter xvtr s meter   Jeff Cochrane - VK4BOF
• [Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00   Jeff Cochrane - VK4BOF
• [Elecraft] k3 tuning power question   Jeff Cochrane - VK4BOF
• [Elecraft] KPA500 - just 500 watts?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 build sequence   Jeff Cochrane - VK4BOF
• [Elecraft] K3: advice about options to buy?   VK7JB
• [Elecraft] K3: advice about options to buy?   VK7JB
• [Elecraft] K3: options to buy: a summary of what I learnt from you all...   VK7JB
• [Elecraft] K3 People   VK7JB
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   VR2BrettGraham
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   VR2BrettGraham
• [Elecraft] Fw: K3/K144XV/P3 Signal Strength Readings   VR2BrettGraham
• [Elecraft] p3 question ?   Paul VanOveren
• [Elecraft] [K2] K2/KPA100 build for K2-7006   Vic, K2VCO
• [Elecraft] KPA500 with K2?   Stephen Victor
• [Elecraft] KPA500 - just 500 watts?   W0FK
• [Elecraft] Help Needed K3 to USB/Serial On Macbook - Info Below   Bruce W1UJR
• [Elecraft] Problem Solved - K3 to USB/Serial On Macbook - Info Below   Bruce W1UJR
• [Elecraft] KPA3 Fails Calibration   Bruce W1UJR
• [Elecraft] KPA3 Fails Calibration   Bruce W1UJR
• [Elecraft] K3 Beta Firmware Rev. 3.57: Synchronous AM Detection (AM-S); misc. improvements   W2XB
• [Elecraft] K3 K3-P3 Stand (Riser)   John W2XS
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for theP3   W4CCS
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode fortheP3   W4CCS
• [Elecraft] P3 Waterfall   W4GRJ
• [Elecraft] ON4UN has a K3?   Bill W4ZV
• [Elecraft] ON4UN has a K3?   Bill W4ZV
• [Elecraft] ON4UN has a K3?   Bill W4ZV
• [Elecraft] K3: advice about options to buy?   Bill W4ZV
• [Elecraft] Filters and Configuration Questions   Bill W4ZV
• [Elecraft] Filters and Configuration Questions   Bill W4ZV
• [Elecraft] K3: options to buy: a summary of what I learnt from you all...   Bill W4ZV
• [Elecraft] OT: LDE defined   Bill W4ZV
• [Elecraft] [K3] Mods missing from web page   Bill W4ZV
• [Elecraft] P3 VFO B Tracking   Bill W4ZV
• [Elecraft] K-3: Unswitched Rx Ant   Bill W4ZV
• [Elecraft] KPA500 - just 500 watts?   Bill W4ZV
• [Elecraft] Tips for using APF   Bill W4ZV
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Bill W4ZV
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Bill W4ZV
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Bill W4ZV
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Bill W4ZV
• [Elecraft] APF measurements: FW 4.17 vs FW4.25 revisited   Bill W4ZV
• [Elecraft] K3 at VP8ORK   Bill W4ZV
• [Elecraft] Nabble   W5UXH
• [Elecraft] KPA-500 vs THP   W5UXH
• [Elecraft] K3 - Firmware question / QRQ   W5UXH
• [Elecraft] K3 & P3 Beta Firmware Release: "Fixed-Tune" mode for theP3   W6NEK
• [Elecraft] Elecraft Paint   Bob W7AVK
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   W8JH
• [Elecraft] K3 TX spurs?   W8JH
• [Elecraft] 120V vs 240V   W8JH
• [Elecraft] K3 filters, changed ideas   Gil WA5YKK
• [Elecraft] Test   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] Nabble   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] Nabble   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] Blue Tooth   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] Getting a buzz, the wrong way   Mike WA8BXN
• [Elecraft] portable radio recommendations wanted   Mike WA8BXN
• [Elecraft] [KX1] Power drops after a few minutes of CW xmitting   Mike WA8BXN
• [Elecraft] lcd monitor   Mike WA8BXN
• [Elecraft] [K3] KXV3A   WB8ENE
• [Elecraft] [K3] KXV3A   WB8ENE
• [Elecraft] Yamaha CM500 - Purchase from outside North America   Deane Walkington
• [Elecraft] [W1, W2], Power Connector Size   Dave Van Wallaghen
• [Elecraft] K2/10 for Sale   Cliff Ward
• [Elecraft] K2/10 for Sale...additional details and price correction   Cliff Ward
• [Elecraft] K2/10 for Sale...additional details and price correction   Cliff Ward
• [Elecraft] K3 Getting warm   Mike Weir
• [Elecraft] K3 and MFJ 1026 hookup   Mike Weir
• [Elecraft] Finally   Scott Weiss
• [Elecraft] ref in a pile up.   Ken Widelitz
• [Elecraft] Build or Service your Elecraft?   Alan D. Wilcox
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   Alan D. Wilcox
• [Elecraft] Motorola 68000 uP - link to photos   Alan D. Wilcox
• [Elecraft] Replacement tuning knob for K2?   Alan D. Wilcox
• [Elecraft] Replacement tuning knob for K2?   Alan D. Wilcox
• [Elecraft] (Very OT)Plasma TV noise   Jim Wiley
• [Elecraft] get to your local library.   Jim Wiley
• [Elecraft] 500w K3 amp   Jim Wiley
• [Elecraft] [Bulk] ssb module or atu first?   Don Wilhelm
• [Elecraft] Please observe...   Don Wilhelm
• [Elecraft] CAL PLL on K2 gives bizarre result   Don Wilhelm
• [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?   Don Wilhelm
• [Elecraft] kat2   Don Wilhelm
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Don Wilhelm
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Don Wilhelm
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Don Wilhelm
• [Elecraft] K3 CW and RTTY tones   Don Wilhelm
• [Elecraft] Curious phenomenon with doublet on 80m   Don Wilhelm
• [Elecraft] AF1: First Impressions   Don Wilhelm
• [Elecraft] AF1: First Impressions   Don Wilhelm
• [Elecraft] [K3] KAT3 and 160 with 40m long doublet   Don Wilhelm
• [Elecraft] KDSP2 - Now What Have I Done?   Don Wilhelm
• [Elecraft] [K2] KAT100 + KPA100 power supply in EC2   Don Wilhelm
• [Elecraft] K1 went out!   Don Wilhelm
• [Elecraft] kat 2 t1 txfmr   Don Wilhelm
• [Elecraft] win 7 32/64 bit   Don Wilhelm
• [Elecraft] [K2] KAT100 + KPA100 power supply in EC2   Don Wilhelm
• [Elecraft] win 7 32/64 bit   Don Wilhelm
• [Elecraft] win 7 32/64 bit   Don Wilhelm
• [Elecraft] win 7 32/64 bit ... caution needed...   Don Wilhelm
• [Elecraft] K3 Software for RTTY   Don Wilhelm
• [Elecraft] K2 BFO Drift / Filter Alignment   Don Wilhelm
• [Elecraft] K2 BFO Drift / Filter Alignment   Don Wilhelm
• [Elecraft] K2 MDS numbers off   Don Wilhelm
• [Elecraft] K3 power switching   Don Wilhelm
• [Elecraft] OT - SMT breadboarding   Don Wilhelm
• [Elecraft] K2 MDS numbers off   Don Wilhelm
• [Elecraft] K3 Manual iTunes   Don Wilhelm
• [Elecraft] Transmitting while listening in diversity mode   Don Wilhelm
• [Elecraft] let's see   Don Wilhelm
• [Elecraft] [K2] VCO Test fail   Don Wilhelm
• [Elecraft] K3_Firmware   Don Wilhelm
• [Elecraft] XV smokin' hot   Don Wilhelm
• [Elecraft] Getting a buzz, the wrong way   Don Wilhelm
• [Elecraft] Data modes issue   Don Wilhelm
• [Elecraft] Data modes issue   Don Wilhelm
• [Elecraft] Data modes issue   Don Wilhelm
• [Elecraft] [KX1] Xmit frequency differs from display on one band   Don Wilhelm
• [Elecraft] [K2] TX Issue in Part III checks   Don Wilhelm
• [Elecraft] [K2] TX Issue in Part III checks   Don Wilhelm
• [Elecraft] [K2] TX Issue in Part III checks   Don Wilhelm
• [Elecraft] [K2] TX Issue in Part III checks   Don Wilhelm
• [Elecraft] K3 Power Switching   Don Wilhelm
• [Elecraft] K3/RigExpert TI-5   Don Wilhelm
• [Elecraft] kat2 question   Don Wilhelm
• [Elecraft] KPA100 Page 44 Resistance Measurements   Don Wilhelm
• [Elecraft] K3/RigExpert TI-5   Don Wilhelm
• [Elecraft] [K2] TX Issue in Part III checks   Don Wilhelm
• [Elecraft] K3/RigExpert TI-5   Don Wilhelm
• [Elecraft] K2: RF Feedback Distortion Problem   Don Wilhelm
• [Elecraft] K2: RF Feedback Distortion Problem   Don Wilhelm
• [Elecraft] K3, LP-Bridge, SteppIR BiggIR antenna   Don Wilhelm
• [Elecraft] [K2] crystal filters bag discarded   Don Wilhelm
• [Elecraft] help with DX4WIN   Don Wilhelm
• [Elecraft] K2 BFO Tune Up   Don Wilhelm
• [Elecraft] help with DX4WIN   Don Wilhelm
• [Elecraft] No PTT   Don Wilhelm
• [Elecraft] Shipping costs   Don Wilhelm
• [Elecraft] K3 - Another push-to-talk question   Don Wilhelm
• [Elecraft] K3 - Another push-to-talk question   Don Wilhelm
• [Elecraft] Yamaha CM500 - Purchase from outside North America   Don Wilhelm
• [Elecraft] Yamaha CM500 - Purchase from outside North America   Don Wilhelm
• [Elecraft] CM500   Don Wilhelm
• [Elecraft] CM500   Don Wilhelm
• [Elecraft] [K2] RF Board c228 broken!!   Don Wilhelm
• [Elecraft] K2 Display problem during CALFIL   Don Wilhelm
• [Elecraft] [K2] KAT2 and KAT100 living happily together?   Don Wilhelm
• [Elecraft] K2: 40m bandpass filter   Don Wilhelm
• [Elecraft] K2: 40m bandpass filter   Don Wilhelm
• [Elecraft] K2 SSB Receive issue   Don Wilhelm
• [Elecraft] K2 SSB Receive issue   Don Wilhelm
• [Elecraft] [K2] 160 meter module install   Don Wilhelm
• [Elecraft] P3 S meter variance   Don Wilhelm
• [Elecraft] K2 SSB Receive issue   Don Wilhelm
• [Elecraft] P3 S meter variance   Don Wilhelm
• [Elecraft] P3 S meter variance   Don Wilhelm
• [Elecraft] P3 S meter variance   Don Wilhelm
• [Elecraft] KX1 - Display partially works   Don Wilhelm
• [Elecraft] NG0R - KSB2 low audio level   Don Wilhelm
• [Elecraft] K2 switch replacement   Don Wilhelm
• [Elecraft] P3 VFO B Tracking   Don Wilhelm
• [Elecraft] K2 speaker/headphones switching.   Don Wilhelm
• [Elecraft] [K3] CW transmit filter bandwith   Don Wilhelm
• [Elecraft] [K2] Two mic cables into K2   Don Wilhelm
• [Elecraft] K2 low audio problem   Don Wilhelm
• [Elecraft] [K2] Ooof.. Update   Don Wilhelm
• [Elecraft] [K2] RF Board: R115 resistance check   Don Wilhelm
• [Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)   Don Wilhelm
• [Elecraft] Line Audio Output Mod   Don Wilhelm
• [Elecraft] Setting K3 default filter BW   Don Wilhelm
• [Elecraft] OT: Exhaustive microphone connector info   Don Wilhelm
• [Elecraft] K2 VCO Alignment   Don Wilhelm
• [Elecraft] K2 VCO Alignment   Don Wilhelm
• [Elecraft] [K2] where there's the smell of smoke...   Don Wilhelm
• [Elecraft] k2 kpa 100 speaker problem   Don Wilhelm
• [Elecraft] [K2] where there's the smell of smoke...   Don Wilhelm
• [Elecraft] K2: Replacement tuning knob for K2?   Don Wilhelm
• [Elecraft] K3: PSK31 Settings   Don Wilhelm
• [Elecraft] K2 / KPA100 - net shorted on KPA100 --> C31 / D13 ... failure modes ?   Don Wilhelm
• [Elecraft] K2: Replacement tuning knob for K2?   Don Wilhelm
• [Elecraft] K2: Replacement tuning knob for K2?   Don Wilhelm
• [Elecraft] K3 RTTY - PSK D   Don Wilhelm
• [Elecraft] NG0R - KSB2 low audio level   Don Wilhelm
• [Elecraft] NG0R - KSB2 low audio level   Don Wilhelm
• [Elecraft] KRC2 Question   Don Wilhelm
• [Elecraft] KRC2 Question   Don Wilhelm
• [Elecraft] KNB2 Installed, but...   Don Wilhelm
• [Elecraft] KPA500 - just 500 watts?   Don Wilhelm
• [Elecraft] Replacement tuning knob for K2?   Don Wilhelm
• [Elecraft] K3: APF effectiveness   Don Wilhelm
• [Elecraft] K3 build sequence   Don Wilhelm
• [Elecraft] K2 DSP   Don Wilhelm
• [Elecraft] KPA500 - just 500 watts?   Don Wilhelm
• [Elecraft] [K2] K2's frequency counter cable with KPA100 installed   Don Wilhelm
• [Elecraft] K2 AGC mod information needed   Don Wilhelm
• [Elecraft] K2 AGC mod information needed   Don Wilhelm
• [Elecraft] [K2] Just a confirm about KIO2   Don Wilhelm
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Don Wilhelm
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   Don Wilhelm
• [Elecraft] K2 and WINMOR   Don Wilhelm
• [Elecraft] [K2] KPA100 "birdie" at 21029   Don Wilhelm
• [Elecraft] [K2] Noise Blanker problem   Don Wilhelm
• [Elecraft] mini coax jumpers (aka TMP cables)   Don Wilhelm
• [Elecraft] K3 Observations Digital Modes and SSB   Don Wilhelm
• [Elecraft] Ref Osc calibration question   Don Wilhelm
• [Elecraft] K3 Observations Digital Modes and SSB   Don Wilhelm
• [Elecraft] K3 - psk31 - HRD   Don Wilhelm
• [Elecraft] K3 Spot Tone Level   Don Wilhelm
• [Elecraft] Zero Beat   Don Wilhelm
• [Elecraft] K3 Amp Key configuration request   David Windisch
• [Elecraft] K3 Amp Key configuration request   David Windisch
• [Elecraft] K3 Power Switching   J. Wolf
• [Elecraft] P3 Temperature Specs   David Yarnes
• [Elecraft] HAPPY NEW YEAR TO ALL!!!   James Young
• [Elecraft] NR suddenly stopped working in SSB   Grant Youngman
• [Elecraft] KPA500 - just 500 watts?   Grant Youngman
• [Elecraft] P3 Feature Request   Grant Youngman
• [Elecraft] K3 losing RF   Paul Ormandy ZL4PW
• [Elecraft] K3 losing RF power   Paul Ormandy ZL4PW
• [Elecraft] K3 losing RF - problem solved   Paul Ormandy ZL4PW
• [Elecraft] OT: LDE defined   DOUGLAS ZWIEBEL
• [Elecraft] BNC adapter question   Matt Zilmer
• [Elecraft] K3, using the Yamaha CM-500   Matt Zilmer
• [Elecraft] P3 question   Matt Zilmer
• [Elecraft] P3 how to question   Matt Zilmer
• [Elecraft] P3 S meter variance   Matt Zilmer
• [Elecraft] k3 tuning power question   Matt Zilmer
• [Elecraft] P3 deaf ??   Matt Zilmer
• [Elecraft] K3 Filter for PSk and RTTY question   Matt Zilmer
• [Elecraft] K2 and WINMOR   Matt Zilmer
• [Elecraft] K3 s/n 3776 operation report   Norman Zinn
• [Elecraft] WSPR with K3   Phillip Zminda
• [Elecraft] Elecraft SSB Net results (1-2-11)   ab2tc
• [Elecraft] RES: Yamaha CM500   ab2tc
• [Elecraft] RES: Yamaha CM500   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] Elecraft SSB Net Announcement   ab2tc
• [Elecraft] A Comment on my 500 Watt Comment   ab2tc
• [Elecraft] OT: Big Ferrite Split Beads @ B.G. Micro   ab2tc
• [Elecraft] APF measurements: FW 4.17 better results by 2 dB   ab2tc
• [Elecraft] LCD TV Causing RFI   ab2tc
• [Elecraft] K3 at VP8ORK   ab2tc
• [Elecraft] K3 - psk31 - HRD   ab2tc
• [Elecraft] Slow learner - K3   AC6JA at aol.com
• [Elecraft] K1 Battery Solution   ARDUJENSKI at aol.com
• [Elecraft] WTB: W6MMA SLB 80m coil   ARDUJENSKI at aol.com
• [Elecraft] N1MM and K3 always on transmit problem   DBellW6AQ at aol.com
• [Elecraft] Line Audio Output Mod   DBellW6AQ at aol.com
• [Elecraft] KDVR3 "not installed"   DBellW6AQ at aol.com
• [Elecraft] K3 - If you're having audio problems   K4IA at aol.com
• [Elecraft] Test   PEN4WWZ at aol.com
• [Elecraft] Elecraft SSB net report for Jan. 9, 2011   PEN4WWZ at aol.com
• [Elecraft] Regarding the 1/9/2011 Elecraft net report   PEN4WWZ at aol.com
• [Elecraft] 2nd try- Elecraft 1/9/2011 SSB Net results   PEN4WWZ at aol.com
• [Elecraft] ELECRAFT SSB RESULTS FOR 1/16/2011   PEN4WWZ at aol.com
• [Elecraft] Elecraft SSB Net report for 1/23/2011   PEN4WWZ at aol.com
• [Elecraft] K-3: Unswitched Rx Ant   RLVZ at aol.com
• [Elecraft] Want to buy 100-watt K3   W0WOI at aol.com
• [Elecraft] Elecraft Paint   W2bpi1 at aol.com
• [Elecraft] K2 #6211 160-80-40 did not work   W2bpi1 at aol.com
• [Elecraft] K2 DSP   W2bpi1 at aol.com
• [Elecraft] K2 DSP   W2bpi1 at aol.com
• [Elecraft] OT: LDE defined   k2zf50 at aol.com
• [Elecraft] OT: LDE defined   k2zf50 at aol.com
• [Elecraft] KPA-500 vs THP   k4tmc at aol.com
• [Elecraft] KPA500- are you ready for your close-up?   wham727 at aol.com
• [Elecraft] APF on K3   k6rb at baymoon.com
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   k6rb at baymoon.com
• [Elecraft] Blue Tooth   k6rb at baymoon.com
• [Elecraft] KPA500 - just 500 watts?   k6rb at baymoon.com
• [Elecraft] just 500W ?   k6rb at baymoon.com
• [Elecraft] P3 question   bill wade, sr.
• [Elecraft] P3 how to question   bill wade, sr.
• [Elecraft] P3 how to question   bill wade, sr.
• [Elecraft] P3 S meter variance   bill wade, sr.
• [Elecraft] KPA500 - just 500 watts?   briana
• [Elecraft] K3 & DM 780   goldtr8 at charter.net
• [Elecraft] K3 HRD & DM780 question with CW   goldtr8 at charter.net
• [Elecraft] K3 CW and RTTY tones   goldtr8 at charter.net
• [Elecraft] k3 tuning power question   goldtr8 at charter.net
• [Elecraft] APF re-check: Rev. 4.17 vs. 4.25 (no difference found)   goldtr8 at charter.net
• [Elecraft] K3 Filter for PSk and RTTY question   goldtr8 at charter.net
• [Elecraft] K3 Observations Digital Modes and SSB   goldtr8 at charter.net
• [Elecraft] K3 Observations Digital Modes and SSB   goldtr8 at charter.net
• [Elecraft] RES: Yamaha CM500   k.igor at comcast.net
• [Elecraft] K2 Transceiver for Sale   mlhooper1 at comcast.net
• [Elecraft] K3 Software for RTTY   robtk21 at comcast.net
• [Elecraft] K3 power switching   robtk21 at comcast.net
• [Elecraft] Shipping costs   robtk21 at comcast.net
• [Elecraft] "the shipping costs are $999.00" -- was "Shipping costs"   robtk21 at comcast.net
• [Elecraft] Shipping costs   robtk21 at comcast.net
• [Elecraft] CM500   n6lrv at cox.net
• [Elecraft] External ALC question   dalej
• [Elecraft] portable radio recommendations wanted   dave
• [Elecraft] [K2] K2-7006 KPA100 is on the way   david
• [Elecraft] K2-7006 KPA100 is on the way   david
• [Elecraft] [K2] K2/KPA100 build for K2-7006   david
• [Elecraft] K2 s/n7006 is now a K2/100   david
• [Elecraft] AF1: First Impressions   dl9hda
• [Elecraft] Setting up the K2 for QSK with a THP amp   dw
• [Elecraft] Question about K2 & K3 Aux bus compatiblity   dw
• [Elecraft] K3 antenna tuner.   van fair
• [Elecraft] GENERAL COMMENTS FROM WB8IDY   george fritkin
• [Elecraft] Happy New Year!!   k2qi.nyc at gmail.com
• [Elecraft] [K3] XV144 fault (offset problem?)   hb9wi
• [Elecraft] K3: PSK31 Settings   eric at hollywoodtitle.com
• [Elecraft] Backup/Restore current configuration via file   ik1bxn
• [Elecraft] Backup/Restore current configuration via file   ik1bxn
• [Elecraft] Backup/Restore current configuration via file   ik1bxn
• [Elecraft] P3 in TX consideration/suggestions ... maybe stupid   ik1bxn
• [Elecraft] P3 in TX consideration/suggestions ... maybe stupid   ik1bxn
• [Elecraft] P3 in TX consideration/suggestions ... maybe stupid   ik1bxn
• [Elecraft] k3 Utility 1.4.1.8 download problem   ik1bxn
• [Elecraft] k3 Utility 1.4.1.8 download problem   ik1bxn
• [Elecraft] k3 Utility 1.4.1.8 download problem   ik1bxn
• [Elecraft] k3 cw decoder and external keyer. does it work?   iz0fyl
• [Elecraft] k3 utility problem   jd.n2uz
• [Elecraft] Ham radio Radio deluxe et K3   jgaudron
• [Elecraft] P3 in TX consideration/suggestions ... maybe stupid   juergen
• [Elecraft] KPA500 - just 500 watts?   juergen
• [Elecraft] APF   juergen
• [Elecraft] Time to Move the Reflector   riese-k3djc at juno.com
• [Elecraft] win 7 32/64 bit   riese-k3djc at juno.com
• [Elecraft] AF1: First Impressions   stan levandowski
• [Elecraft] OT - AF4K please contact me   stan levandowski
• [Elecraft] [K2] K2/KPA100 build for K2-7006   david m
• [Elecraft] [K2] K2, KPA100, N-GEN, W1 Construction Blog   david m
• [Elecraft] QRP Does Work - Even In New England Winters   w1ujr at mac.com
• [Elecraft] K3 at VP8ORK   wb6rse1 at mac.com
• [Elecraft] 500w K3 amp   eric manning
• [Elecraft] KPA500 - just 500 watts?   eric manning
• [Elecraft] Fishing   eric manning
• [Elecraft] Second RX and KBPF3   aa3cs at me.com
• [Elecraft] K3 antenna tuner.   aa3cs at me.com
• [Elecraft] K3 antenna tuner.   aa3cs at me.com
• [Elecraft] My opinion ..KPA 500   r miles
• [Elecraft] (no subject)   william moody
• [Elecraft] unequal power output per tone in FSK   Mark n2qt
• [Elecraft] clear RIT upon tuning in K3?   Mark n2qt
• [Elecraft] clear RIT upon tuning in K3?   Mark n2qt
• [Elecraft] Yamaha CM500 in stock at Sam Ash for $45 inc shipping   Mark n2qt
• [Elecraft] CM500   Mark n2qt
• [Elecraft] loss of main RX   Mark n2qt
• [Elecraft] k3 Utility 1.4.1.8 download problem   Julius Fazekas n2wn
• [Elecraft] K2-7006 KPA100 is on the way   zendoc at netspace.net.au
• [Elecraft] Yamaha CM500 - Purchase from outside North America   zendoc at netspace.net.au
• [Elecraft] K2: Replacement tuning knob for K2?   zendoc at netspace.net.au
• [Elecraft] A vote of thanks to Don...   zendoc at netspace.net.au
• [Elecraft] ELECRAFT SAVES STRAIGHT KEY NIGHT!   eric norris
• [Elecraft] OT: Preparing for KPA500 and KAT500   eric norris
• [Elecraft] Elecraft SSB Net report for 1/23/2011   pcbyrne
• [Elecraft] RES: Yamaha CM500   py5eg
• [Elecraft] RES: RES: Yamaha CM500   py5eg
• [Elecraft] RES: RES: Yamaha CM500   py5eg
• [Elecraft] Elecraft SSB Net announcement   phils at riousa.com
• [Elecraft] Elecraft SSB net announcement   phils at riousa.com
• [Elecraft] let's see   tony rowland
• [Elecraft] not needed   tony rowland
• [Elecraft] (no subject)   tony rowland
• [Elecraft] THNKS   tony rowland
• [Elecraft] cw keyboard?   tony rowland
• [Elecraft] get to your local library.   tony rowland
• [Elecraft] ref in a pile up.   tony rowland
• [Elecraft] K3 - psk31 - HRD   roger shirko
• [Elecraft] K3/P3/PC baud rate   gdaught6 at stanford.edu
• [Elecraft] K3 MIC COMP   philippe.trottet at ties.itu.int
• [Elecraft] win 7 32/64 bit   tuxman
• [Elecraft] kpa100 top cover panel screws   ve7ymm
• [Elecraft] k2 kpa 100 speaker problem   ve7ymm
• [Elecraft] k2 kpa 100 speaker problem   ve7ymm
• [Elecraft] [K2] VCO Test fail   Stephen vk2rh
• [Elecraft] K3: advice about options to buy?   vr2xmc
• [Elecraft] K3: advice about options to buy?   vr2xmc
• [Elecraft] short BNC to BNC cable assembly, where to get?   vr2xmc
• [Elecraft] Ref Osc calibration question   w0ih
• [Elecraft] FW: K3 Feature Request   w5ov at w5ov.com
• [Elecraft] K3 - Firmware question / QRQ   w5ov at w5ov.com
• [Elecraft] K3 - Firmware question / QRQ   w5ov at w5ov.com
• [Elecraft] K3 - Firmware question / QRQ   w5ov at w5ov.com
• [Elecraft] N1MM and K3 always on transmit problem   nr4c at widomaker.com
• [Elecraft] K3: advice about options to buy?   nr4c at widomaker.com
• [Elecraft] K3 power switching   nr4c at widomaker.com
• [Elecraft] K3: options to buy: a summary of what I learnt from you all...   nr4c at widomaker.com
• [Elecraft] unequal power output per tone in FSK   nr4c at widomaker.com
• [Elecraft] K3, using the Yamaha CM-500   nr4c at widomaker.com
• [Elecraft] Take the plung!   wp4cw
• [Elecraft] Me and my K3 in the ARRL RTTY Roundup   wt6p

Last message date: Mon Jan 31 23:40:17 EST 2011
Archived on: Mon Jan 31 23:40:23 EST 2011

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...