[Elecraft] K2 SSB Receive issue

[Don Wilhelm]

  Is your reference to "21m" a typo instead of 20m, or are you referring 
to the 21 MHz band which is 15m.
Are you choosing USB for the 20m, 17m, 15m, 12m and 10m bands?.
How does the LSB signals on 80m and 40m sound?

The sideband inversion Geoff mentioned is such that on 15m, 12m and 10m, 
the actual sideband being used is the same as LSB on 80 and 40.  The K2 
automatically accounts for the inversion, and displays the mode as USB 
which is correct.

73,
Don W3FPR

On 1/15/2011 4:04 PM, KA1YMX wrote:
> I am sorry I should have mentioned I have the KSB2 SSB board installed.  I
> followed the K2 Dial calibration procedures on your website to verify
> everything is aligned properly and it is. I checked for SSB reception on 21m
> and 12m and the SSB audio is still distorted. All other bands work below
> 21m.