[Elecraft] K2 SSB Receive issue

[KA1YMX]

I used my K3 to transmit a USB/LSB on all bands except for 10m. The only two
bands that I could receive a readable SSB signal was on 20m and 17m. I tried
USB and LSB on all other bands and could not receive a readable signal. I
used my S-Meter to adjust the frequency on the signal in which I did not
have a readable signal and the peak of the signal on the K2 was about 2.2
khz below the indicated frequency on the K3.  I adjusted and verified the K2
is on frequency using WWV prior to performing this test so I know both the
K2 and K3 are on frequency.
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K2-SSB-Receive-issue-tp5925220p5925735.html
Sent from the [K2] mailing list archive at Nabble.com.