[Elecraft] [K2] RF Board c228 broken!!

[Don Wilhelm]

  Pippo,

That is in the 40 meter low pass filter, so most any 56 pF capacitor 
will work fine if it fits physically.
I would likely use an NP0 or C0G type if I had one available.

73,
Don W3FPR

On 1/14/2011 6:38 AM, Giuseppe Sorrentino wrote:
> Hy to all, trying and re trying i finally succedeed in brake a component. It's
> the little cap 228 on rf board marked as 560. The damage is well visible on
> image on link above. I must replace it and want to know if i have to find a
> prticular type of cap as a replacement.
>
>