[Elecraft] New Production Firmware Release: K3 rev. 4.25, P3 rev 1.00

[Jim Sheldon]

Loaded P3 rev 1.00 with no problems - the missing centerline problem mentioned earlier did not occur with my load of the software.  

Question I have is what changes were in the K3 production vs beta as the numbers are the same as the beta versions.  Should I overwrite the MCU only, all, or none?

W0EB

> K3 firmware rev. 4.25 and P3 rev. 1.00 are now production releases.
> Thanks for all your feedback and suggestions during beta testing of
> the new "fixed-tune" mode for the P3.
>
> For instructions on how to load K3 and P3 production firmware, see:
>
> http://www.elecraft.com/K3/k3_software.htm
>
> and
>
> http://www.elecraft.com/software/P3/elecraft_p3_software.htm
>
> 73,
> Wayne
> N6KR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html