[Elecraft] K3 Stumped.

[Phil Hystad]

I would check connections on the VFO B encoder with the circuit board or look for a short.  Then, if that does not show anything, give up.  Actually, I would give up -- my next step being to call Elecraft support.  Or, alternatively, call Elecraft support first.

Good luck,
73, phil, K7PEH


On Jan 30, 2011, at 9:37 AM, Dohn Smythe wrote:

> Fellas,
> I am firing up my K3 for the second time.  I wanted to begin to do the synthesizer calibration.
> 
> When I tap Menu, it goes to "LCD CRT" and can be adjusted by VFO A.  I CANNOT access any other menu item.
> 
> When I hold CONFIG, It says "CONFIG" briefly in VFO B window and as soon as I let up, I am in the "TIME" configuration.  It can be adjusted by VFO A as it should.  BUT when I turn VFO B it WILL NOT switch out the config menu.  It won't go from one config item to another.  
> 
> For some reason, my VFO B does not seem to be responding.  I'm sure I'm doing something wrong.
> 
> I have not done anything else.  Should I download updates and install them first?  What am I missing?  Something simple I hope.
> 
> 73
> Dohn Smythe  N8EWY
> n8ewy at comcast.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html