[Elecraft] Elecraft Firmware 4.25 / MicroHAM / N1MM 11.1.4

[Joe Subich, W4TV]

You have not configured N1MM Logger correctly.  Select "Dual RX
Always On"  (Config | Dual Rx Always On).

What you're seeing is strictly a function of the way N1MM logger
is designed to work - not a failure of the K3 or microHAM Router.

73,

    ... Joe, W4TV


On 1/29/2011 11:14 AM, Brian Moran wrote:
> I'm participating in the cq160 contest, and am having some difficulty w/the 4.25
> firmware, thought I'm not sure it's particular to this version.
>
> When I'm using the sub-rx, the setup gets 'into this mode' where where the
> sub-rx is switched OFF when I stop CQing. Turning on and off the radio sometimes
> (2 out of 3?) cures it. Stopping N1MM does NOT cure it. Stopping the Microham
> driver (7.7.1) does NOT cure it every time.
>
> I captured the serial comms in the Microham utility -- it's at
> https://bmoran.onehub.com/d/1xu7/k3_vfo_weirdness.log (or  also
> https://bmoran.onehub.com/n9adg/pages/home/content_items/show/7e6c4002f30b31f260a223059206a88df93e9f5c/k3_vfo_weirdness.log)
>
>
> Has anyone else seen this?
>
> Any pointers on what other information to gather to troubleshoot this?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>