[Elecraft] K3 Bandwidth in data mode

[JAMES ROGERS]

Houston, we have a problem.  When I go to data mode, PSK31 or RTTY, I  
have the full bandwidth of the selected roofing filter displayed on  
the DM780 waterfall.  I ran through all the different data modes and  
there are subtle changes but nothing like you describe. The only way I  
can duplicate your problem in by adjusting the WIDTH control which I  
keep set at 2.8 for my 2.8 filter, 1.0 for my selected filter for data  
modes.

73s Jim, W4ATK
On Jan 15, 2011, at 7:12 AM, Larry Boekeloo wrote:

> I can't find this in the manual so here goes.....
>
> Any ideas how to increase the bandwidth when the K3 is in data  
> mode?  Right now, it's will only open to 200 hz and it's too narrow  
> to tune around the band looking for rtty signals.
>
> Thanks.
>
> Larry, KN8N
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

JIM ROGERS
w4atk at bellsouth.net
http://web.me.com/jimrogers_w4atk