[Elecraft] help with DX4WIN

[Wayne Rogers]

Thanks to all the responders.  Unhappily I haven't yet found the problem: 
Here's what's been suggested:

"I would wager that you have your CW pitch set to 650 Hz, either in the  K3 
or in DX4WIN or both."  I believe it is set to 650, but I can't find 
anything that would cause the spot offset.

"Try changing  CONFIG CW WGHT.  TAP1 to not have CW+SSB in the window."  I 
tried this with the settings of both CW+SSB and CW-SSB but didn't fix the 
problem.

"Turn CONFIG: VFO OFS - OFF."  It was OFF.

"What version of K3 software are you using?"  MCU 04.22, FPF 01.14, DSP1 
02.70 ( all current).

Thanks to all,

Wayne N1WR


> On 1/11/2011 1:58 PM, Wayne Rogers wrote:
>> I got no help from the DX4WIN reflector on this.  Maybe (hopefully) 
>> someone here can help?
>>
>> I use DX4WIN 8.08 and a K3.  I have been experiencing an oddity that I 
>> have
>> not been able to resolve:
>>
>> With K3 tuned to 3500.0, if I double click on a spot at 3503.5 the K3 
>> goes
>> to 3503.5.  No problem.
>>
>> With the K3 in the CW portion of the band (e.g. 3503.5) if I double click 
>> on
>> a spot at 3800.0 the K3 goes to 3800.65.
>>
>> With the radio in the SSB portion of the band (e.g. 3800.0) if I double
>> click on a spot at 3503.5 the K3 goes to 3502.85.
>>
>> I am getting a 650 Hz offset whenever the K3 changes modes.  This happens 
>> in
>> DX4WIN, but not in N1MM.
>>