[Elecraft] K2 warping

[Andrew Moore]

It's tough to get a 4-legged anything to sit absolutely flat.  If you want
stable, just ditch the rear feet and put a single rear foot at the rear
center, leaving the two front feet (or tilt bail) as-is.  Tripod is stable.





On Wed, Jan 12, 2011 at 8:49 PM, Dan Grizzard <af4lb at verizon.net> wrote:

> I just hate the new Verizon email format. Here I go again!
>
> My K2 has developed a warping issue. Recently completed and finally totally
> assembled the unit does not set flat on the desk or stand. It wobbles. I
> have loosened the 3d connector screws, set heavy books on the rig on a
> marble top table and then re-tightened the screws. The rig then sits flat
> with no wobble. The next morning the warp is back. Has anyone had this
> issue?
> Thanks in advance for your input.
> 73
> Daniel Grizzard
> Extra Class
> af4lb
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>