[Elecraft] help with DX4WIN

[Wayne Rogers]

Problem solved - thanks to Dave, N4QS.

Under CONFIG CW WGHT - tapping 5 toggles between VFO offset on SSB/CW mode 
change (VFO OFS) or
no offset (VFO NOR, default).  After Dave pointed this out I went to the pdf 
version of the manual and sure enough - it included this option.  I guess I 
need to toss the old (outdated) hard copy manual I got with the radio!

73, Wayne

Wayne Rogers wrote:
> Thanks to all the responders.  Unhappily I haven't yet found the problem:
> Here's what's been suggested:
>
> "I would wager that you have your CW pitch set to 650 Hz, either in the 
> K3
> or in DX4WIN or both."  I believe it is set to 650, but I can't find
> anything that would cause the spot offset.
>
> "Try changing  CONFIG CW WGHT.  TAP1 to not have CW+SSB in the window."  I
> tried this with the settings of both CW+SSB and CW-SSB but didn't fix the
> problem.
>
> "Turn CONFIG: VFO OFS - OFF."  It was OFF.
>
> "What version of K3 software are you using?"  MCU 04.22, FPF 01.14, DSP1
> 02.70 ( all current).
>
> Thanks to all,
>
> Wayne N1WR
>