[Elecraft] WSPR with K3

[Joe Subich, W4TV]

The K3 support is (and has been) broken in HAMLIB on the Windows
platform.  Fldigi, WSPR and other software that requires HAMLIB
for rig support will not work reliably with the K3.

It's up to the maintainer of the Windows port of HAMLIB to fix the
issue.

73,

    ... Joe, W4TV


On 1/3/2011 2:51 PM, Phillip Zminda wrote:
> I started experimenting with WSPR over the weekend using my MacBook
> Pro 13 in with the Intel processor running Windows XP using Parallels
> virtual machine. I have the audio connected through an iMic external
> USB sound-card and the K3 is connected to the Mac with a generic USB
> to Serial card with the Prolific drivers. I can receive and transmit
> with VOX but the CAT control will not seem to work to change frequency
> or bands. The K3 connects OK to the Mac using K3 Utilities and HRD.
>
> I have tried various setup combinations of COM port, baud rate and
> handshake but can't find the right configuration to get frequency
> control.
>
> Is anybody running a similar setup who can make some suggestions? Any
> help is appreciated.
>
> Thanks
>
> Phil N3ZP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>