[Elecraft] P3 0.050 Glitch?

[K7WIA]

I just downloaded the new software for the P3 & the K3 and everything went
well..

I set the P3 to display S meter readings (not DBM)  and I noticed something
when I went to the 6 meter band.

I put a dummy load on the K3 and went through all the bands and set the REF
LVL on the P3 so the base line is at S1 
all went well till I got to the 6 meter band .
the Ref Lvl on the P3 is set to 125 on all bands untill I get to 6 meters.
now I have to set the Ref Lvl to 144 to get S1 to show at the bottom of the
P3 and now the base line is at S5  and it should be down at S1 like all the
other bands.  this is with a dummy load attached right at the antenna
connector of the K3......just switching between 10 & 6 meters its like there
is too much output to the P3 when going to 6...
am I missing something?

Ed  K7WIA

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/P3-0-050-Glitch-tp5920743p5920743.html
Sent from the Elecraft mailing list archive at Nabble.com.