[Elecraft] K2 AGC mod information needed

[Don Wilhelm]

  The information is now in my hands, thanks to Gary KI4GGX.

73,
Don W3FPR

On 1/27/2011 9:59 AM, Don Wilhelm wrote:
>    In some time past, someone developed a mod for the K2 AGC which
> allowed all parameters for the threshold and S-meter response to be varied.
> The mod used 3 trimpots installed on the Control Board.
>
> I need the documentation for this mod if possible.  I thought I had most
> all the K2 documentation or knew where to find it, but this one escaped.
>
>