[Elecraft] [K3] KAT3 and 160 with 40m long doublet
Jim Brown
jim at audiosystemsgroup.com
Sun Jan 2 16:42:12 EST 2011
On 1/2/2011 12:03 PM, Stephen Prior wrote:
> I don't have a good enough ground to feed the antenna as a Marconi so my
> options other than lengthening the antenna are rather limited.
Don't give up so easily. In Chicago, I used a big wrought iron fence
plus a dozen or so 30 ft long wires as counterpoise for a Marconi; KK9H
has used the HVAC ducts in his home. ANY counterpoise is better than NO
counterpoise. In another installation, I've run as many fairly short
wires as I could from the base of the antenna, connected them together,
and to the coax shield. Was it as good as 70 quarter-wave radials? Of
course not. Did the antenna work well enough for me to have a lot of
fun? Yup!
My Marconi was a 100 ft long center-fed dipole with loading coils to
resonate it on 80M. Just for fun, I tried loading it as a dipole on 160.
Performance was wretched. Using it as a Marconi gave me signal reports
at least 10dB better.
73, Jim K9YC
More information about the Elecraft
mailing list