[Elecraft] [K2] no speaker audio (perhaps bad headphone jack?)

[Dave Sergeant]

You have probably already checked this, but:

Is the lead to the speaker plugged into P5 on th RF board?
Do you get audio if you plug the headphones or a speaker into the rear 
Ext Speaker socket?
Is the speaker itself OK, and all wiring intact?

73 Dave G3YMC

On 19 Jan 2011 at 10:33, John Shadle wrote:

> Hi all,
> I read through the archives and am wondering if I may have fallen prey
> to the "bad headphone jack" problem. I am able to hear just fine when I
> have my headphones plugged in, but get no audio out of the speaker when
> I remove the headphones.
> 
> For the record, the speaker *did* work at one point...and I only
> started using the rig in October. Although I do pull the headphones out
> quite a bit since that's what I use to listen when I operate. This
> problem started a few weeks ago and I'm just now starting to think about
> trying to find a solution to it.
> 
> I'm using the K2 with the KPA100 mounted on top. (At one point I had the
> KAT100/KPA100 in the same enclosure, but I have since moved to an SGC
> SG-239 at the base of my vertical and no longer need the KAT100 at this
> time.)
> 
> Any tips for troubleshooting this problem?
> 


http://www.davesergeant.com