[Elecraft] FW: [N1MM] FSK problems on K3 radio

Tommy Alderman aldermant at windstream.net
Thu Jan 20 19:40:00 EST 2011


This is a copy of a message I just posted on the N1MM Logger reflector. This
is not just an N1MM problem because I tried MMTTY 1.64G stand-alone program
and had the same results. If anyone has any experience/helpful suggestion as
to how to fix this, your input would be greatly appreciated. I did spend
several hours going through my user's manual searching for help, but that
was not fruitful. 

Thanks and 73,

Tom - W4BQF


-----Original Message-----
From: N1MMLogger at yahoogroups.com [mailto:N1MMLogger at yahoogroups.com] On
Behalf Of Tommy Alderman
Sent: Thursday, January 20, 2011 7:31 PM
To: N1MMLogger at yahoogroups.com
Subject: [N1MM] FSK problems on K3 radio

Win 7 Pro 64-bit
N1MM v 11.01.01
MMTTY 1.64G
K3 radio

CONFIG:Hardware
COM 3:	Radio Control - DTR set to Always OFF - RTS set to PTT
COM1:	Digital checked - DTR set to Always OFF / RTS set to Always OFF
EXTFSK: 	Set to COM 1 - FSK = TxD / PTT = DTR

K3 CONFIG: PTT-KEY  RTS - OFF  (but I later found out it does not matter how
this is set!)


N1MM and MMTTY transmits the messages fine; any macro is sent correctly and
while sending, I can hear the audio (dittles). The problem is that once the
macro is completed and sends the command to switch to receive, the K3 does
not produce any audio. I have read N1MM's documentation on the K3 and pretty
well followed the section titled 'Option 2', but after about six hours I
have run out of things to try.

All I need is to get the K3 to return to receive mode, and I am aware of the
possible "key-down" condition mentioned  in the Option 2 document.

Any help will be greatly appreciated.

73,

Tom - W4BQF



[Non-text portions of this message have been removed]



------------------------------------

To unsubscribe, send an email to:
N1MMLogger-unsubscribe at yahoogroups.com

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/N1MMLogger/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/N1MMLogger/join
    (Yahoo! ID required)

<*> To change settings via email:
    N1MMLogger-digest at yahoogroups.com 
    N1MMLogger-fullfeatured at yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    N1MMLogger-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/




More information about the Elecraft mailing list