[Elecraft] 120 vs 240

[Bill K9YEQ]

I feel very fortunate.... My 240 panel is within 20' of the shack.  I wired
it myself and I think I spent <$75 for all the hardware.

Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Edward R. Cole
Sent: Tuesday, January 25, 2011 5:37 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] 120 vs 240

Having recently run 245 vac to my "shack", I can say the HVPS runs well.
Key down at 1400w on my 2m-8877 and the line voltage drops 5v
(240 vs 245).  I guess that is pretty good.  I ran 40amp wiring (35-feet of
#8awg 4-cond) and split out two 120vac 20A ckts to run some of the other ham
equipment so that I am not loading the three outlets in the room so heavily.

The room outlets run the computer stuff, rotators, lights, test equipment
and workbench supplies.  The 12v-50A, 28v-25A, and 8877 PS are run on the
245 vac ckt.

It cost me about $300 for materials.  I had to buy 100-feet of wire so that
ran it up more than what I needed.  But I made a emergency gen. 240v
ext.cord out some of that.  We have a 6500w Honda standby generator that
powers the whole house.  I could even run QRO on the gen.

73, Ed - KL7UW

-------------------------------
The quality of the 120V run makes a big difference.  For example, if it's a
15A branch circuit feeding multiple outlets across several rooms -- and if
wiring is formed with pressure-contact receptacles, -- and the receptacle
you need is on the end of the string, don't count on a stiff supply.

By contrast, if a dedicated 20A branch circuit is run only to the shack,
uses clamp terminals, and the feed is shared between the amp and a few
low-current devices, then output power should be more predictable with
minimal voltage sag at the 500W level.

Anyone considering a new 120V circuit to the shack to avoid these problems
(in my case it was dimming lights) may want to consider pulling a companion
4-wire 240V circuit to handle all commercial amps, new and old.

Paul, W9AC


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-1.4kw*, 432-100w*, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep dubususa at hotmail.com
======================================
*temp not in service
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html