[Elecraft] K3 with microwave transverter - Frequency display

[Bill Davis Jr]

   I too would like to see this readout change. I am in agreement with the "less certain digit". I use transverters with my K3 on 6,2,222,902,1296 and 10Ghz at this time.

73  Bill  K0AWU  EN37ed

-------

> Date: Sun, 23 Jan 2011 01:48:01 -0800
> From: m.j.willis at rl.ac.uk
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 with microwave transverter - Frequency display
> 
> 
> The K3 displays the frequency for bands above 1 GHz by missing the most
> significant digit. I would rather it missed the least significant one. Then
> 1296 would read 1296 rather than 296. This is I feel justified on the
> grounds that, for non-GPS locked systems, by the time one is over 1GHz the
> last 100Hz or so of resolution it is a bit less certain. 
> 
> Secondly, I seem to be having trouble with direct frequency entry on 2320.
> The IF is 144MHz via an XV144 but if I try to enter 2320.200 I can't. I can
> enter 144.300 on 2m so I think this is a problem only over 1 GHz.
> 
> Mike
> -- 
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-microwave-transverter-Frequency-display-tp5952398p5952398.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html