[Elecraft] K3/P3/PC baud rate

[Tommy Alderman]

38,400b works well for me, with either N1MM Logger or my QSO program, YPlog.
Never have any problem other than those caused by the nut behind the wheel!
I use a K3 and the P3 with no issue at that baud rate.

Tom - W4BQF


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of gdaught6 at stanford.edu
Sent: Sunday, January 09, 2011 3:50 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3/P3/PC baud rate

Greetings,

The P3 manual says that the P3 and K3 are ALWAYS 
communicating at 38400 baud, but the PC/P3 baud rate is adjustable.

I'm using N1MM-Logger on my PC, and I'm wondering what baud 
rate others are using successfully in such a setup.  (Using 38400 for 
PC/P3 seems to be too fast for N1MM to be rock-solid reliable. For 
example, N1MM's frequency display is sometimes sluggish in 
catching up with the K3's displayed freqency.)

What works for you?

73,

George T Daughters, K6GT
CU in the California QSO Party (CQP)
October 1-2, 2011


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html