[Elecraft] help with DX4WIN

[Richard Ferch]

In the K3's CONFIG:CW WGHT configuration item, what is your setting for 
automatic VFO offset on SSB/CW mode changes (changed by tapping the 5 
button)? If this option is set to VFO OFS and the frequency change is 
performed before the mode change, the mode change will result in an 
offset equal to your CW sidetone pitch. If this option is set to VFO 
NOR, or if the mode change is performed before the frequency change, 
there will be no such offset. This could account for both the offset and 
the difference between the two software programs.

73,
Rich VE3KI


On 1/11/2011 1:58 PM, Wayne Rogers wrote:
 > I got no help from the DX4WIN reflector on this.  Maybe (hopefully) 
someone here can help?
 >
 > I use DX4WIN 8.08 and a K3.  I have been experiencing an oddity that 
I have
 > not been able to resolve:
 >
 > With K3 tuned to 3500.0, if I double click on a spot at 3503.5 the K3 
goes
 > to 3503.5.  No problem.
 >
 > With the K3 in the CW portion of the band (e.g. 3503.5) if I double 
click on
 > a spot at 3800.0 the K3 goes to 3800.65.
 >
 > With the radio in the SSB portion of the band (e.g. 3800.0) if I double
 > click on a spot at 3503.5 the K3 goes to 3502.85.
 >
 > I am getting a 650 Hz offset whenever the K3 changes modes.  This 
happens in
 > DX4WIN, but not in N1MM.
 >