[Elecraft] K3, LP-Bridge, SteppIR BiggIR antenna

[John Gaynard]

I have the LP-Bridge functioning with the logger.  I now need to get it
working with the SteppIR.  The K3 connects to the computer via the COM1
port.  I have the current  K3 USB serial cable connected to the SteppIR via
COM9 port  using a serial extension cable with DB9 F to DB9F adapter to
match up with the DB9M connector on the K3 USB cable.  The SteppIR is set to
Kenwood command set and 4800bps.  The SteppIR is not responding to frequency
changes on the K3.  I see the USB serial output on the LP-Bridge port
display.

 

John K8WDN