[Elecraft] Replacement tuning knob for K2?

[Alan D. Wilcox]

Jim,
About a third way down the page at 
http://wilcoxengineering.com/amateur-radio/elecraft-k2  I mentioned the 
Yaesu FT-100 knob part numbers that I used in my K2.
Cheers, Alan

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://eBookEditor.net
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701


On 1/21/11 6:51 PM, Jim Lowman wrote:
> I guess I dropped off the list, and just re-subscribed.
>
> Some years ago there was a discussion about replacing the stock tuning
> knob on the K2 with a heavier one with a finger dimple.
> Could someone refresh my memory on what knob was used?
>
> I'm thinking about one that Ten-Tec sells; a heavier metal knob like I
> used to replace the stock knob on my Argonaut V and 516/"6N2."
>
> Thanks in advance for any suggestions.
>
> 72/73 de Jim - AD6CW
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>