[Elecraft] KAT3 freq range

[Eric Swartz WA6HHQ - Elecraft]

Approximately up to 10:1 on most bands. Less on 160M and 6M.

73, Eric

_..._


On 1/13/2011 7:15 AM, Guy Olinger K2AV wrote:
> The answer to the question is a fairly large dataset, or a series of
> multiple trace graphs, or a math utility that if you give it a
>
> On Thu, Jan 13, 2011 at 10:04 AM, Scott Ellington<
> sdelling at facstaff.wisc.edu>  wrote:
>
>> The schematic shows the values of the inductors and capacitors.  From those
>> values, you could easily determine whether or not it could match a specific
>> impedance at a specific frequency.  However, specifying SWR "tuning range"
>> is difficult, because a given SWR can present a whole range of impedances at
>> the tuner.  If you really wanted to, you could plot the impedance range on a
>> Smith Chart for each band.  From that, you could get an idea SWR range.
>>   Perhaps one of the Smith Chart applications could automate that.  It could
>> also be done with a spreadsheet.
>>
>> 73,
>>
>> Scott  K9MA
>>
>>
>>
>> On Jan 13, 2011, at 8:47 AM, Gary Mohrlant wrote:
>>
>>> I have looked at the manual and on line and I haven't found the tuning
>>> range of the KAT3 tuner. Anyone have this info?
>>>
>>> Gary W0GHZ
>> Scott Ellington
>> Madison, Wisconsin
>> USA
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html