[Elecraft] N1MM and K3 always on transmit problem

[nr4c at widomaker.com]

Yes. You have PTT or KEY(CW) configured wrong. maybe try to start N1MM  
without the K3 on. Find these settings and verify the configuration.  
Also check your cabling. Might try unplugging all cables and  
re-connecting one by one.


Divide and Conquer.
...bc nr4c





Quoting DBellW6AQ at aol.com:

> I switched computers and now, just getting N1MM on screen causes the K3 to
> transmit. The K3 works as usual with N1MM off and vice versa. Phone or
> CW, VOX on or off, no matter. When N1MM and the K3 are on together, the K3
> is in transmit.
>
> Any help?
>
> 73, Dave
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>