[Elecraft] Data modes issue

[Jim Littlefield]

Yes, I definitely have the MIC SEL set to LINE IN and the LINE IN gain 
at 30.


On 1/8/2011 1:57 PM, John Ragle wrote:
> Check in particular...
>
> MIC SEL = LINE IN
>
> also
>
> LIN IN set to ~10-30 depending on band...
>
> My mic gain runs about "LINE 30" and the SignaLink (IF USING) has TX @ 
> 9 O'Clock and RX @ 11 or 12 O'Clock. (Again, IF USING SignaLink, both 
> jumpers that deal with audio olume are set to the "high" setting...see 
> instructions.)
>
> John Ragle -- W1ZI
>
> =====
>
> On 1/8/2011 1:47 PM, Jim Littlefield wrote:
>> Just got my new K3 and everything is great about it except, sound card
>> data modes (PSK31, etc.) are not working. I put the radio in Data A
>> mode. When I transmit, the rig is keyed, I can hear audio via the
>> monitor function, but nothing is transmitted. I have tried cranking the
>> Mic gain (actually the line in gain) way up, but that doesn't help. I
>> have also confirmed the transmitter is not in test mode.
>>
>> Any suggestions?
>>
>
>


-- 
73 de Jim Littlefield WN1X