[Elecraft] KX1 - Display partially works

[Don Wilhelm]

  Kieth,

The most likely problem is that you failed to solder pin 1 of either the 
display itself or the resistor pack directly bellow it.  Pin 1 of both 
are associated with the "d" segment (lowest horizontal segment) of the 7 
segment display.

Pin 1 has a round pad while the rest are rectangular, so it is often 
overlooked.

73,
Don W3FPR


On 1/16/2011 2:52 PM, K Price wrote:
> I have just completed the 2nd phase and am at the Alignment/Testing  Phase II.
> When I powered up the radio in Phase I the display appeared  to function
> normally and all parts of it lit up.  For Phase II the  bottom row of the
> display no longer lights up.  Otherwise, the display  functions as you would
> expect.  I have checked for solder bridges and  shorts but do not see anything.
>
>