January 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Jan 1 00:06:04 EST 2017
Ending: Tue Jan 31 23:42:17 EST 2017
Messages: 1107

• [Elecraft] K3 Utility Not Connecting (Virtual Windows Environmentmay be a factor)   Larry Gauthier (K8UT)
• [Elecraft] KX3 and paddle for digi modes, display TX text   Peter Eijlander (PA0PJE)
• [Elecraft] KX3 and paddle for digi modes   Peter Eijlander (PA0PJE)
• [Elecraft] Running WSPR on KX3 using a Mac   Peter Eijlander (PA0PJE)
• [Elecraft] OT: Ham funeral processions   Rick Bates (WA6NHC)
• [Elecraft] Source for K3 weighted knobs   Doug Faunt N6TQS +1-510-717-1197
• [Elecraft] best agc setting for the k3s   Vic Rosenthal 4X6GP
• [Elecraft] Very short 80m antenna   Vic Rosenthal 4X6GP
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Vic Rosenthal 4X6GP
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Vic Rosenthal 4X6GP
• [Elecraft] KPA500 Temps?   cx7tt at 4email.net
• [Elecraft] WTB - KX2   Dave AD6A
• [Elecraft] P3 TX Monitor   Dave AD6A
• [Elecraft] Help with dimensions please   Dave AD6A
• [Elecraft] KPA500 Power Supply Environmental/Ergonomic Issue   Dave AD6A
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest, Feb. 4th   John AE5X
• [Elecraft] K3 VFO link not working   Stan AE7UT
• [Elecraft] K3 VFO link not working   Stan AE7UT
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Chester Alderman
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Chester Alderman
• [Elecraft] K2/10 Low power   Byron Allen
• [Elecraft] Trade: Tektronix TDS-3012B Digital O-Scope   Byron Allen
• [Elecraft] K2/10 Low power   Byron Allen
• [Elecraft] Very short 80m antenna   Jim Allen
• [Elecraft] Elecraft] Random wire lengths for antennas   Jim Allen
• [Elecraft] Winter Field Day (WFD)   Randy Allen
• [Elecraft] KX3 Problem   Peter Alterman
• [Elecraft] More advice requested   Peter Alterman
• [Elecraft] KX3 Now Driving Alpha   Peter Alterman
• [Elecraft] Laptop Connection to KX3   Peter Alterman
• [Elecraft] Audio artifacts in DATA A mode with KX3   David Anderson
• [Elecraft] Audio artifacts in DATA A mode with KX3   David Anderson
• [Elecraft] Audio artifacts in DATA A mode with KX3   David Anderson
• [Elecraft] KX3 Switch Tones   David Anderson
• [Elecraft] WSJT-X MSK144 & Transmit Delay   David Anderson
• [Elecraft] WSJT-X Problem with K3S   David Anderson
• [Elecraft] WSJT-X Problem with K3S   David Anderson
• [Elecraft] Advanced Receiver Research P50VDG 6M Preamp   Ken Arck
• [Elecraft] Is it just me?   Ken Arck
• [Elecraft] K3 Sold   Frederick Atchley
• [Elecraft] K3S and WSPR   Benny Aumala
• [Elecraft] Elecraft Website Hacked?   James Austin
• [Elecraft] Elecraft Support   Clay Autery
• [Elecraft] KPA-500 Running hot on 20m   Clay Autery
• [Elecraft] k-pod data cable   Clay Autery
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Clay Autery
• [Elecraft] The "Kinda Random Antenna"   Clay Autery
• [Elecraft] Battery recommendations   Eddy Avila
• [Elecraft] Elecraft Website Hacked?   Dave B
• [Elecraft] K3S Set-up for WSJT-X   Dave B
• [Elecraft] Dimmable LED desk lamp for operating position   Dave B
• [Elecraft] WSJT-X Problem with K3S   Dave B
• [Elecraft] Elecraft Digest, Vol 153, Issue 21   Dave B
• [Elecraft] Elecraft Digest, Vol 153, Issue 23   Dave B
• [Elecraft] KAT500 - Earthing Post   Dave B
• [Elecraft] Elecraft Digest, past chirp report   Dave B
• [Elecraft] Elecraft Digest, KXPA100 RF feedback   Dave B
• [Elecraft] Elecraft K3 RemoteRig Issue - Remote radio won't power off   Dave B
• [Elecraft] Elecraft Digest, Vol 153, Issue 41   Dave B
• [Elecraft] Elecraft Digest, KX3 internal battery problem   Dave B
• [Elecraft] K2 Filter question   Michael Babineau
• [Elecraft] Fwd: What Two Bands would you pick for a K1?   Michael Babineau
• [Elecraft] Random wire lengths for antennas   Michael Babineau
• [Elecraft] K3 Missing remote control command(s)   Heinz Baertschi
• [Elecraft] K3 Missing remote control command(s)   Heinz Baertschi
• [Elecraft] K2 on 60m (K60XV)   Heinz Baertschi
• [Elecraft] K2 on 60m (K60XV)   Heinz Baertschi
• [Elecraft] 9:1 Balun   Morgan Bailey
• [Elecraft] Is it just me?   Nate Bargmann
• [Elecraft] Is it just me?   Nate Bargmann
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Barry
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Barry
• [Elecraft] K3 DATA A Mode not working   Barry
• [Elecraft] K3: past chirp report   Barry
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Barry
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Barry
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Barry
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Barry
• [Elecraft] The "Kinda Random Antenna"   Barry
• [Elecraft] The "Kinda Random Antenna"   Barry
• [Elecraft] The "Kinda Random Antenna"   Barry
• [Elecraft] The "Kinda Random Antenna"   Barry
• [Elecraft] The "Kinda Random Antenna"   Barry
• [Elecraft] kx3 receiver versus K3s receiver   Erik Basilier
• [Elecraft] K3 names on ANT1 and ANT2   Erik Basilier
• [Elecraft] K3 names on ANT1 and ANT2   Erik Basilier
• [Elecraft] PX3 can see my tramsmiited signal   Don Baucom
• [Elecraft] PX3:can see my transmitted signal   Don Baucom
• [Elecraft] KIO3 board needed   Robert Benedict
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   James Bennett
• [Elecraft] KXAT2: Recommended Random Wire Lengths   James Bennett
• [Elecraft] KXAT2: Recommended Random Wire Lengths   James Bennett
• [Elecraft] WTB Elecraft W2, 2kw sensor   Raymond Benny
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Raymond Benny
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Raymond Benny
• [Elecraft] So glad I asked   Bill
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Bill
• [Elecraft] Source for K3 weighted knobs   Bill
• [Elecraft] Problem with my K2   Bjarne Birch
• [Elecraft] Elecraft Support   Alan Bloom
• [Elecraft] K2 on the air!   Alan Bloom
• [Elecraft] P3 TX Monitor with Two Sensors?   Alan Bloom
• [Elecraft] P3 TX Monitor with Two Sensors?   Alan Bloom
• [Elecraft] K3: past chirp report   Alan Bloom
• [Elecraft] Elecraft Digest, Vol 153, Issue 26   Randy Boates
• [Elecraft] Source for K3 weighted knobs   Bob
• [Elecraft] Source for K3 weighted knobs   Chortek Bob
• [Elecraft] K3/P3/expert 1.3KA   Chortek Bob
• [Elecraft] K2 / 100 for sale   Burl Borcherding
• [Elecraft] Elecraft Support   Jack Brindle
• [Elecraft] What Two Bands would you pick for a K1?   Jack Brindle
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Jim Brown
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Jim Brown
• [Elecraft] KPA500 with WSJT digital modes   Jim Brown
• [Elecraft] Coaxial Transfer Switches   Jim Brown
• [Elecraft] SWR on 40 meters   Jim Brown
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Jim Brown
• [Elecraft] WSJT-X Problem with K3S   Jim Brown
• [Elecraft] bias battery box fromYamaha CM500   Jim Brown
• [Elecraft] k-pod data cable   Jim Brown
• [Elecraft] k-pod data cable   Jim Brown
• [Elecraft] KPA500 Temps?   Jim Brown
• [Elecraft] k-pod data cable   Jim Brown
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   Jim Brown
• [Elecraft] K3/P3/expert 1.3KA   Jim Brown
• [Elecraft] Very short 80m antenna   Jim Brown
• [Elecraft] FSK problem with my K3   Jim Brown
• [Elecraft] Audio Output Impedance of the KX3   Jim Brown
• [Elecraft] Audio Output Impedance of the KX3   Jim Brown
• [Elecraft] Audio Output Impedance of the KX3   Jim Brown
• [Elecraft] Running WSPR on KX3 using a Mac   Jim Brown
• [Elecraft] Powered Speaker for KX1   Jim Brown
• [Elecraft] Powered Speaker for KX1   Jim Brown
• [Elecraft] What Two Bands would you pick for a K1?   Jim Brown
• [Elecraft] Advanced Receiver Research P50VDG 6M Preamp   Jim Brown
• [Elecraft] Advanced Receiver Research P50VDG 6M Preamp   Jim Brown
• [Elecraft] Is it just me?   Jim Brown
• [Elecraft] Is it just me?   Jim Brown
• [Elecraft] Powered Speaker for KX1   Jim Brown
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Jim Brown
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Jim Brown
• [Elecraft] Filters   Jim Brown
• [Elecraft] 9:1 Balun AND "random antennas"   Jim Brown
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Terry Brown
• [Elecraft] 9:1 Balun   David Bunte
• [Elecraft] Audio artifacts in DATA A mode with KX3   Wayne Burdick
• [Elecraft] Upcoming SoCal trip - available for KX-Line demo/talk/SOTA hike   Wayne Burdick
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest, Feb. 4th   Wayne Burdick
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest, Feb. 4th   Wayne Burdick
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest, Feb. 4th   Wayne Burdick
• [Elecraft] Source for K3 weighted knobs   Wayne Burdick
• [Elecraft] KX2 Receive problem!?   Wayne Burdick
• [Elecraft] KE7X "Elecraft Macro Programming" book   Wayne Burdick
• [Elecraft] K3: past chirp report   Wayne Burdick
• [Elecraft] K3: past chirp report   Wayne Burdick
• [Elecraft] Idea: HF Flash Mobs   Wayne Burdick
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Wayne Burdick
• [Elecraft] Random wire lengths for antennas   Wayne Burdick
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Wayne Burdick
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Wayne Burdick
• [Elecraft] [KX3] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Wayne Burdick
• [Elecraft] (no subject)   Wayne Burdick
• [Elecraft] Rotating Macros and the K-Pod ?   Cady, Fred
• [Elecraft] P3 macros on the KPod?   Cady, Fred
• [Elecraft] KPA500 with WSJT digital modes   Cady, Fred
• [Elecraft] Macro for text decode   Cady, Fred
• [Elecraft] K3 Missing remote control command(s)   Cady, Fred
• [Elecraft] K-Pod question   Cady, Fred
• [Elecraft] K-Pod question   Cady, Fred
• [Elecraft] K-Pod question   Cady, Fred
• [Elecraft] k-pod data cable   Cady, Fred
• [Elecraft] KE7X "Elecraft Macro Programming" book   Cady, Fred
• [Elecraft] wrong macro for PF2?   Cady, Fred
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Cady, Fred
• [Elecraft] kenwood MC-60A   Carl-N8VZ
• [Elecraft] K3 mini on SSB   Jim Cary
• [Elecraft] Idea: HF Flash Mobs   James Cassidy
• [Elecraft] HF Flashmob   Jim Cassidy
• [Elecraft] KUSB Drivers for Windows 10   Peter Chamalian
• [Elecraft] K3, FLDIGI, and Macintosh   Eklund Charles
• [Elecraft] So glad I asked   Charlie T, K3ICH
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Charlie T, K3ICH
• [Elecraft] Dimmable LED desk lamp   Charlie T, K3ICH
• [Elecraft] K3: past chirp report   Charlie T, K3ICH
• [Elecraft] What Two Bands would you pick for a K1?   Charlie T, K3ICH
• [Elecraft] Is it just me?   Charlie T, K3ICH
• [Elecraft] Random wire lengths for antennas   Charlie T, K3ICH
• [Elecraft] Elecraft CW Net options   Kenneth Christiansen
• [Elecraft] Elecraft CW Net options   Kenneth Christiansen
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Kenneth Christiansen
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Kenneth Christiansen
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Kenneth Christiansen
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Kenneth Christiansen
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Ron D'Eau Claire
• [Elecraft] Elecraft Website Hacked?   Ron D'Eau Claire
• [Elecraft] Macro for text decode   Ron D'Eau Claire
• [Elecraft] K3 Missing remote control command(s)   Ron D'Eau Claire
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Ron D'Eau Claire
• [Elecraft] K3s meter   Ron D'Eau Claire
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Ron D'Eau Claire
• [Elecraft] Elecraft Support   Ron D'Eau Claire
• [Elecraft] P3 SVGA Scratch Pad   Ron D'Eau Claire
• [Elecraft] Elecraft Support   Ron D'Eau Claire
• [Elecraft] K2 on the air!   Ron D'Eau Claire
• [Elecraft] KPA-500 Running hot on 20m   Ron D'Eau Claire
• [Elecraft] KANT3A   Ron D'Eau Claire
• [Elecraft] Happy Dance   Ron D'Eau Claire
• [Elecraft] K-pod issue....I think?   Ron D'Eau Claire
• [Elecraft] KXPA-100 weight   Ron D'Eau Claire
• [Elecraft] K-pod issue....I think?   Ron D'Eau Claire
• [Elecraft] k-pod data cable   Ron D'Eau Claire
• [Elecraft] k-pod data cable   Ron D'Eau Claire
• [Elecraft] k-pod data cable   Ron D'Eau Claire
• [Elecraft] K3: past chirp report   Ron D'Eau Claire
• [Elecraft] Source for K3 weighted knobs   Ron D'Eau Claire
• [Elecraft] K3: past chirp report   Ron D'Eau Claire
• [Elecraft] K3: past chirp report   Ron D'Eau Claire
• [Elecraft] K3: past chirp report   Ron D'Eau Claire
• [Elecraft] K3: past chirp report   Ron D'Eau Claire
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Ron D'Eau Claire
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Ron D'Eau Claire
• [Elecraft] Is it just me?   Ron D'Eau Claire
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Ron D'Eau Claire
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Ron D'Eau Claire
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Ron D'Eau Claire
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Ron D'Eau Claire
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Ron D'Eau Claire
• [Elecraft] The "Kinda Random Antenna"   Ron D'Eau Claire
• [Elecraft] Random wire lengths for antennas   Ron D'Eau Claire
• [Elecraft] The "Kinda Random Antenna"   Ron D'Eau Claire
• [Elecraft] The "Kinda Random Antenna"   Ron D'Eau Claire
• [Elecraft] KPA500 Power Supply Environmental/Ergonomic Issue   Ron D'Eau Claire
• [Elecraft] {OT} - Variation on use of a coaxial switch   Edward R Cole
• [Elecraft] K3S Set-up for WSJT-X   Edward R Cole
• [Elecraft] KXAT100 antenna tuner for KXPA100   Edward R Cole
• [Elecraft] KPA-500 Running hot on 20m   Edward R Cole
• [Elecraft] WSJT-X Problem with K3S   Edward R Cole
• [Elecraft] Running WSPR on KX3 using a Mac   Edward R Cole
• [Elecraft] Subject: Re: Is it just me?   Edward R Cole
• [Elecraft] For Sale: KX-2 s/n 8xx   Jack Colson
• [Elecraft] KX-2 has been sold   Jack Colson
• [Elecraft] (OT) MAG LOOP ANTENNAS   Robert 'RC' Conley
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Robert 'RC' Conley
• [Elecraft] (OT FINI ) MAG LOOP ANTENNAS   Robert 'RC' Conley
• [Elecraft] Happy Dance   Jim Cox
• [Elecraft] What Two Bands would you pick for a K1?   Curt
• [Elecraft] Main Menu--ATTEN function   CenturyLink Customer
• [Elecraft] KIO3B RTTY AFSK problem with Transmit   Dan
• [Elecraft] Problem with N1MM+ ansd My K3 in ARRL RTTY Test   Irwin Darack
• [Elecraft] Coaxial Transfer Switches   Dauer, Edward
• [Elecraft] K2 on the air!   Dauer, Edward
• [Elecraft] Elecraft Digest, Vol 153, Issue 21   Dauer, Edward
• [Elecraft] Weighted knobs   Dauer, Edward
• [Elecraft] Solar Cycles   Dauer, Edward
• [Elecraft] Fusing   Dauer, Edward
• [Elecraft] FS: Remoterig RRC-1258MkIIs K3-Twin, UK Only   Dave
• [Elecraft] Coaxial Transfer Switches   David Ferrington, M0XDF
• [Elecraft] k-pod data cable   David Ferrington, M0XDF
• [Elecraft] KXPA-100 weight   David Davis
• [Elecraft] Audio artifacts in DATA A mode with KX3   Carl Jón Denbow
• [Elecraft] Building a K2, Does anyime have a set of rework e   Brian Denley
• [Elecraft] Source for K3 weighted knobs   Hajo Dezelski
• [Elecraft] Very short 80m antenna   Hajo Dezelski
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Hajo Dezelski
• [Elecraft] kx3 receiver verses k3s receiver   Vincent Diak
• [Elecraft] Headphones   Alex Dokic
• [Elecraft] Headphones   Alex Dokic
• [Elecraft] For sale: Yamaha   Robert Dorchuck
• [Elecraft] For sale: Yamaha   Robert Dorchuck
• [Elecraft] K3: For Sale: K3S Station   Robert Dorchuck
• [Elecraft] FW: P3 TX Monitor with Two Sensors?   Dr. William J. Schmidt, II
• [Elecraft] What Two Bands would you pick for a K1?   "Hjalmar Duklæt"
• [Elecraft] Antenna for 2nd receiver   Paul Van Dyke
• [Elecraft] Audio Output Impedance of the KX3   ANCLETUS ERNEST
• [Elecraft] KX3 battery charging and alarm setting.   Gerard Elijzen
• [Elecraft] SDRplay and Win4K3   Doug Ellmore
• [Elecraft] HF SuperBacker Pro 100w Amp for Sale   Doug Ellmore
• [Elecraft] Elecraft Website Hacked?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Audio Output Impedance of the KX3   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] R: {OT} - Variation on use of a coaxial switch (stan levandowski)   F5vjc
• [Elecraft] KPA-500 fix   Andrew Faber
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Mel Farrer
• [Elecraft] Audio Output Impedance of the KX3   Mel Farrer
• [Elecraft] Powered Speaker for KX1   Mel Farrer
• [Elecraft] KPA-500 Running hot on 20m   W0MU Mike Fatchett
• [Elecraft] KPA-500 Running hot on 20m   W0MU Mike Fatchett
• [Elecraft] Problem with N1MM+ ansd My K3 in ARRL RTTY Test   W0MU Mike Fatchett
• [Elecraft] KXPA-100 weight   W0MU Mike Fatchett
• [Elecraft] KXPA-100 weight   W0MU Mike Fatchett
• [Elecraft] Source for K3 weighted knobs   W0MU Mike Fatchett
• [Elecraft] Source for K3 weighted knobs   W0MU Mike Fatchett
• [Elecraft] K3/P3/expert 1.3KA   W0MU Mike Fatchett
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   W0MU Mike Fatchett
• [Elecraft] Filters   W0MU Mike Fatchett
• [Elecraft] Problem with N1MM+ and My K3 in ARRL RTTY Test   Richard Ferch
• [Elecraft] KPA500 with WSJT digital modes   Josh Fiden
• [Elecraft] KPA500 with WSJT digital modes   Josh Fiden
• [Elecraft] Is it just me?   Josh Fiden
• [Elecraft] Elecraft Website Hacked?   Dave Fifield
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Dave Fifield
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Richard Fjeld
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Richard Fjeld
• [Elecraft] Coaxial Transfer Switches   Richard Fjeld
• [Elecraft] Elecraft Website Hacked?   Richard Fjeld
• [Elecraft] Battery Leakage   Richard Fjeld
• [Elecraft] K3: past chirp report   Richard Fjeld
• [Elecraft] K3: past chirp report   Richard Fjeld
• [Elecraft] K3: past chirp report   Richard Fjeld
• [Elecraft] K3: past chirp report   Richard Fjeld
• [Elecraft] 1 5/8 inch hard line FOR SALE   Richard Fjeld
• [Elecraft] K-pod issue....I think?   Mike Flowers
• [Elecraft] Elecraft Support   Cameron Francey
• [Elecraft] What Two Bands would you pick for a K1?   Cameron Francey
• [Elecraft] Antenna for 2nd receiver   Bill Frantz
• [Elecraft] K3S Set-up for WSJT-X   Bill Frantz
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Bill Frantz
• [Elecraft] Volumn from K3S USB interface   Bill Frantz
• [Elecraft] Elecraft Support   Bill Frantz
• [Elecraft] KIO3B RTTY AFSK problem with Transmit   Bill Frantz
• [Elecraft] K3s-wsjt-wspr   Bill Frantz
• [Elecraft] k-pod data cable   Bill Frantz
• [Elecraft] k-pod data cable   Bill Frantz
• [Elecraft] k-pod data cable   Bill Frantz
• [Elecraft] Source for K3 weighted knobs   Bill Frantz
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Bill Frantz
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Bill Frantz
• [Elecraft] The "Kinda Random Antenna"   Bill Frantz
• [Elecraft] Filters   Bill Frantz
• [Elecraft] Headphones   Dave Fugleberg
• [Elecraft] K-Pod question   Dave Fugleberg
• [Elecraft] K-Pod question   Dave Fugleberg
• [Elecraft] K-Pod question   Dave Fugleberg
• [Elecraft] K3 Transmit Issue on 80M SSB   Dave Fugleberg
• [Elecraft] K3 Transmit Issue on 80M SSB   Dave Fugleberg
• [Elecraft] Solar Cycles   Mike Furrey
• [Elecraft] (OT) MAG LOOP ANTENNAS   C G
• [Elecraft] Very short 80m antenna   C G
• [Elecraft] KAT500 - Earthing Post   Alan. G4GNX
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Alan. G4GNX
• [Elecraft] Help with dimensions please   Alan. G4GNX
• [Elecraft] Help with dimensions please   Alan. G4GNX
• [Elecraft] K3 Monitor function   Tony G6GLP
• [Elecraft] K-pod issue....I think?   Tony G6GLP
• [Elecraft] K3 ERR DSE   Tony G6GLP
• [Elecraft] K3 ERR DSE   Tony G6GLP
• [Elecraft] K-POD Issue solved   Tony G6GLP
• [Elecraft] K3s-wsjt-wspr   PAUL GM0BKC
• [Elecraft] KAT500 - Earthing Post   GW4DVB
• [Elecraft] Random wire lengths for antennas   Hank Garretson
• [Elecraft] Elecraft Website Hacked?   Phil Genera
• [Elecraft] best agc setting for the k3s   Gmail - George
• [Elecraft] WSJT-X MSK144 & Transmit Delay   M. George
• [Elecraft] More KX2 recieve questions   David Gilbert
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   David Gilbert
• [Elecraft] FW: K3 Transmit Random Cutout   Pete Gladysz
• [Elecraft] [KX3] A BNC Connector to consider for your KX2 / KX3   Mark Goldberg
• [Elecraft] KUSB Drivers for Windows 10   Dick Grolleman
• [Elecraft] W2 setting SWR alarm trip points   Chuck Guenther
• [Elecraft] W2 setting SWR alarm trip points   Chuck Guenther
• [Elecraft] KX2 Receive problem!?   Chuck Guenther
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest, Feb. 4th   Arthur Gunn
• [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm Springs hamfest - content streaming question   Arthur Gunn
• [Elecraft] best agc setting for the k3s   Dave Hachadorian
• [Elecraft] KPA500 with WSJT digital modes   Mike Hagele
• [Elecraft] KANT3A   HankP
• [Elecraft] More KX2 recieve questions   Augie "Gus" Hansen
• [Elecraft] Random wire lengths for antennas   Augie "Gus" Hansen
• [Elecraft] [K3S] KREF3MDKT   Mike Harris
• [Elecraft] Elecraft Digest, Vol 153, Issue 17   Gary Hawkins
• [Elecraft] I need More RX Volume on my K3, has anyone run an external audio amp?   Dave Heil
• [Elecraft] Beep   Jeff Herr
• [Elecraft] Elecraft] Idea: HF Flash Mobs   Mike Herr
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Kjeld Holm
• [Elecraft] 9:1 Balun   Thomas Horsten
• [Elecraft] 9:1 Balun   Thomas Horsten
• [Elecraft] 9:1 Balun   Thomas Horsten
• [Elecraft] [KX3] The "Kinda Random Antenna"   Howard Hoyt
• [Elecraft] Elecraft CW Net options   Brian Hunt
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Brian Hunt
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Brian Hunt
• [Elecraft] kx3 receiver versus K3s receiver   Ignacy
• [Elecraft] kx3 receiver versus K3s receiver   Ignacy
• [Elecraft] KPA-500 Running hot on 20m   Ignacy
• [Elecraft] K3/P3/expert 1.3KA   Ignacy
• [Elecraft] K3/P3/expert 1.3KA   Ignacy
• [Elecraft] K3 and right channel dead   Ignacy
• [Elecraft] Solved: Selected post Jan 27, 2017; 9:19pm K3 and right channel dead   Ignacy
• [Elecraft] Random wire lengths for antennas   Ignacy
• [Elecraft] Mosfet PA   Szabó István
• [Elecraft] What Two Bands would you pick for a K1?   Eric J
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   James F. Boehner, MD
• [Elecraft] Elecraft Free - Straight Key Night   Jan
• [Elecraft] bias battery box fromYamaha CM500   Jeff
• [Elecraft] bias battery box fromYamaha CM500   Jeff
• [Elecraft] EZNEC Help   Fred Jensen
• [Elecraft] KPA-500 Running hot on 20m   Fred Jensen
• [Elecraft] Age of K2?   Fred Jensen
• [Elecraft] Happy Dance   Fred Jensen
• [Elecraft] (OT) MAG LOOP ANTENNAS   Fred Jensen
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Fred Jensen
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Fred Jensen
• [Elecraft] Audio Output Impedance of the KX3   Fred Jensen
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Fred Jensen
• [Elecraft] Solar Cycles   Fred Jensen
• [Elecraft] K3 RemoteRig Issue - Remote radio won't power off fully   Fred Jensen
• [Elecraft] Solar Cycles   Fred Jensen
• [Elecraft] The "Kinda Random Antenna"   Fred Jensen
• [Elecraft] 9:1 Balun   Fred Jensen
• [Elecraft] 9:1 Balun   Fred Jensen
• [Elecraft] HF Flash Mobs   Jensen, Mark (UND)
• [Elecraft] Strange behavior on K3 system when transmitting   Jerry
• [Elecraft] Please do a KPA1500   Joe Subich, W4TV
• [Elecraft] WSJT-X Problem with K3S   Joe Subich, W4TV
• [Elecraft] WSJT-X Problem with K3S   Joe Subich, W4TV
• [Elecraft] No output on K3   Joe Subich, W4TV
• [Elecraft] K-Pod question   Joe Subich, W4TV
• [Elecraft] K-Pod question   Joe Subich, W4TV
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   Joe Subich, W4TV
• [Elecraft] ALC on line in?   Joe Subich, W4TV
• [Elecraft] Filters   Joe Subich, W4TV
• [Elecraft] 9:1 Balun   Joe Subich, W4TV
• [Elecraft] 9:1 Balun AND "random antennas"   Joe Subich, W4TV
• [Elecraft] 9:1 Balun   Joe Subich, W4TV
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   John
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   John
• [Elecraft] K3s-wsjt-wspr   John
• [Elecraft] Looking for a K3/K3S   John_N1JM
• [Elecraft] Looking for a K3/K3S   John_N1JM
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Bill Johnson
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Bill Johnson
• [Elecraft] Elecraft Support   Bill Johnson
• [Elecraft] Elecraft Support   Bill Johnson
• [Elecraft] kx3 receiver verses k3s receiver   Bill Johnson
• [Elecraft] K2 on the air!   Bill Johnson
• [Elecraft] K3: past chirp report   Bill Johnson
• [Elecraft] What Two Bands would you pick for a K1?   Bill Johnson
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Bill Johnson
• [Elecraft] Looking for a K3/K3S   Bill Johnson
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Bill Johnson
• [Elecraft] Is it just me?   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] K3 RemoteRig Issue - Remote radio won't power off fully   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] Building a K2, Does anyime have a set of rework e   Bill Johnson
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Bill Johnson
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Bill Johnson
• [Elecraft] K3 VFO link not working   Bill Johnson
• [Elecraft] The "Kinda Random Antenna"   Bill Johnson
• [Elecraft] 9:1 Balun   Bill Johnson
• [Elecraft] K3S Set-up for WSJT-X   Charles Johnson
• [Elecraft] KX3/KX2 voltage display   Lyle Johnson
• [Elecraft] k-pod data cable   Lyle Johnson
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Lyle Johnson
• [Elecraft] Audio artifacts in DATA A mode with KX3   Nicklas Johnson
• [Elecraft] Audio artifacts in DATA A mode with KX3   Nicklas Johnson
• [Elecraft] Audio artifacts in DATA A mode with KX3   Nicklas Johnson
• [Elecraft] WSJT-X Problem with K3S   Nicklas Johnson
• [Elecraft] WSJT-X Problem with K3S   Nicklas Johnson
• [Elecraft] WSJT-X Problem with K3S   Nicklas Johnson
• [Elecraft] WSJT-X Problem with K3S   Nicklas Johnson
• [Elecraft] WSJT-X Problem with K3S   Nicklas Johnson
• [Elecraft] Is it just me?   Roger D Johnson
• [Elecraft] KPA500 with WSJT digital modes   Josh
• [Elecraft] Feature Request: Assert KX3 ACC2 GPIO line on tune   K22
• [Elecraft] K3s meter   Guy Olinger K2AV
• [Elecraft] WSJT-X Problem with K3S   Guy Olinger K2AV
• [Elecraft] WSJT-X Problem with K3S   Guy Olinger K2AV
• [Elecraft] Source for K3 weighted knobs   Guy Olinger K2AV
• [Elecraft] K3: past chirp report   Guy Olinger K2AV
• [Elecraft] Solved: Selected post Jan 27, 2017; 9:19pm K3 and right channel dead   Guy Olinger K2AV
• [Elecraft] K3 VFO link not working   Guy Olinger K2AV
• [Elecraft] HI SIG Error on K3   K4MWB
• [Elecraft] 9:1 Balun   Kevin - K4VD
• [Elecraft] 9:1 Balun   Kevin - K4VD
• [Elecraft] KPA-500 Running hot on 20m   Ken K6MR
• [Elecraft] KX3 serial number doesn't match   Wayne Moore K7EX
• [Elecraft] K3s-wsjt-wspr   Gary K9GS
• [Elecraft] SWR on 40 meters   K9MA
• [Elecraft] SWR on 40 meters   K9MA
• [Elecraft] kx3 receiver versus K3s receiver   K9MA
• [Elecraft] kx3 receiver versus K3s receiver   K9MA
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   K9MA
• [Elecraft] Fwd: Re: The "Kinda Random Antenna"   K9MA
• [Elecraft] 9:1 Balun   K9MA
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   John K9UWA
• [Elecraft] K2 on the air!   K9ZTV
• [Elecraft] K3 with Signalink or MRP40   KC6CNN
• [Elecraft] K3 with Signalink or MRP40   KC6CNN
• [Elecraft] K3 with Signalink or MRP40   KC6CNN
• [Elecraft] P3 SVGA Scratch Pad   KC6CNN
• [Elecraft] P3 SVGA Scratch Pad   KC6CNN
• [Elecraft] P3 SVGA works, but text stops   KC6CNN
• [Elecraft] P3 SVGA works, but text stops   KC6CNN
• [Elecraft] OT thread non-Elecraft Looking for 5 Pense piece   KC6CNN
• [Elecraft] Idea: HF Flash Mobs   KD6QZX
• [Elecraft] Tandem operation of KPA and ACOM 1500   KV5J
• [Elecraft] KANT3A   KV5J
• [Elecraft] Narrow Transmit bandwith   KV5J
• [Elecraft] Elecraft Support   Edward Kacura
• [Elecraft] Elecraft Support   Kevin
• [Elecraft] [K3S] KREF3MDKT   Kevin
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Kevin
• [Elecraft] Fldigi - K3 connection   George Kidder
• [Elecraft] Fldigi - K3 connection   George Kidder
• [Elecraft] K3s meter   George Kidder
• [Elecraft] KAT500 Utility problem   George Kidder
• [Elecraft] KAT500 Utility problem   George Kidder
• [Elecraft] Elecraft CW Net options   David Koch
• [Elecraft] Elecraft Website Hacked?   Ken G Kopp
• [Elecraft] OT: Ham funeral processions   Ken G Kopp
• [Elecraft] [KX3] A BNC Connector to consider for your KX2 / KX3   Ken G Kopp
• [Elecraft] OT : The passage of time brings change 😁   Ken G Kopp
• [Elecraft] Powered Speaker for KX1   Ken G Kopp
• [Elecraft] Powered Speaker for KX1   Ken G Kopp
• [Elecraft] Random wire lengths for antennas   Dean L
• [Elecraft] MAG LOOP ANTENNAS   Peter LaBissoniere
• [Elecraft] Solar Cycles   Peter LaBissoniere
• [Elecraft] KPA-500 Running hot on 20m   Gordon LaPoint
• [Elecraft] K3s-wsjt-wspr   Gordon LaPoint
• [Elecraft] K3s-wsjt-wspr   Gordon LaPoint
• [Elecraft] K2 (K60XV)   William Lagerberg
• [Elecraft] Volumn from K3S USB interface   Richard Lamont
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Richard Lamont
• [Elecraft] KXPA100 RF feedback   John Lemay
• [Elecraft] P3 TX Monitor   John Lemay
• [Elecraft] P3 TX Monitor   John Lemay
• [Elecraft] Upgrade of K3 control of KPA500   William Levy
• [Elecraft] FS: SP3   David Lichtenwalner
• [Elecraft] SP3 Sold   David Lichtenwalner
• [Elecraft] HI SIG Error on K3   Phillip Lontz
• [Elecraft] So glad I asked   Al Lorona
• [Elecraft] K3S Set-up for WSJT-X   Al Lorona
• [Elecraft] Source for K3 weighted knobs   Al Lorona
• [Elecraft] [KPA500] Pushing an amplifier   Al Lorona
• [Elecraft] Battery recommendations   Lynn W. Taylor, WB6UUT
• [Elecraft] KAT-500 Remote software display   Lynn W. Taylor, WB6UUT
• [Elecraft] MAG LOOP ANTENNAS   Lynn W. Taylor, WB6UUT
• [Elecraft] Is it just me?   Lynn W. Taylor, WB6UUT
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   Lynn W. Taylor, WB6UUT
• [Elecraft] Random wire lengths for antennas   Lynn W. Taylor, WB6UUT
• [Elecraft] The "Kinda Random Antenna"   Lynn W. Taylor, WB6UUT
• [Elecraft] 9:1 Balun   Lynn W. Taylor, WB6UUT
• [Elecraft] 9:1 Balun   Lynn W. Taylor, WB6UUT
• [Elecraft] 9:1 Balun   Lynn W. Taylor, WB6UUT
• [Elecraft] Q11 Blown   Dickie M0AUW
• [Elecraft] [K3S] KREF3MDKT   Raymond METZGER
• [Elecraft] K2 power too high (won't reduce properly to 0.1W)   MW0RSS
• [Elecraft] Elecraft at QuartzFest   Bill Mader
• [Elecraft] Elecraft at QuartzFest   Bill Mader
• [Elecraft] Problem with my K2   Matt Maguire
• [Elecraft] MH3 mic with the K3?   Ron Manfredi
• [Elecraft] MH3 mic with the K3?   Ron Manfredi
• [Elecraft] Headphones   Ron Manfredi
• [Elecraft] Elecraft Support   Scott Manthe
• [Elecraft] KX3 internal battery problem   Mark
• [Elecraft] KX3 Gain Calibration - Failing   Aaron Marroquin
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Dale Martin
• [Elecraft] FS: KRC-2 w/cables   Ralph McClintock
• [Elecraft] FS: KRC-2 w/cables-- SOLD   Ralph McClintock
• [Elecraft] Random wire lengths for antennas   Tom McCulloch
• [Elecraft] Looking for a K3/K3S   John Merrill
• [Elecraft] K3 Sensitivity   jay Miller
• [Elecraft] No output on K3   Bruce Miller
• [Elecraft] No output on K3   Bruce Miller
• [Elecraft] KPA500 with WSJT digital modes   Jim Miller
• [Elecraft] KPA500 with WSJT digital modes   Jim Miller
• [Elecraft] KPA500 with WSJT digital modes   Jim Miller
• [Elecraft] Antenna switches   Jim Miller
• [Elecraft] Tandem operation of KPA and ACOM 1500   Jim Miller
• [Elecraft] KANT3A   Jim Miller
• [Elecraft] Problem setting up K3s with WSJTv1.7   Jim Miller
• [Elecraft] Problem setting up K3s with WSJTv1.7   Jim Miller
• [Elecraft] Mobile Radio Dreams & the KX2   Joe Moffatt
• [Elecraft] Audio artifacts in DATA A mode with KX3   Jon Moody
• [Elecraft] Elecraft Website Hacked?   Jerry Moore
• [Elecraft] Strange problem with K3s/10: could use some suggestions   Jerry Moore
• [Elecraft] KX2 receive problems solved...but no details given!   Mike Morrow
• [Elecraft] What Two Bands would you pick for a K1?   Mike Morrow
• [Elecraft] Elecraft Website Hacked?   Matt Murphy
• [Elecraft] K3: past chirp report   Mark E. Musick
• [Elecraft] K3S Set-up for WSJT-X   Jean-François Ménard
• [Elecraft] P3 TX Monitor with Two Sensors?   Jean-François Ménard
• [Elecraft] P3 TX Monitor with Two Sensors?   Jean-François Ménard
• [Elecraft] P3 TX Monitor with Two Sensors?   Jean-François Ménard
• [Elecraft] P3 TX Monitor with Two Sensors?   Jean-François Ménard
• [Elecraft] P3 TX Monitor with Two Sensors?   Jean-François Ménard
• [Elecraft] k-pod data cable   Jean-François Ménard
• [Elecraft] k-pod data cable   Jean-François Ménard
• [Elecraft] k-pod data cable   Jean-François Ménard
• [Elecraft] Source for K3 weighted knobs   Jean-François Ménard
• [Elecraft] K3 names on ANT1 and ANT2   Jean-François Ménard
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Jean-François Ménard
• [Elecraft] Strange problem with K3s/10: could use some suggestions   Bill Leonard N0CU
• [Elecraft] Strange problem with K3s/10: could use some suggestions   Bill Leonard N0CU
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] K3 - stuck at MCU LD we upgrading software   N2TK, Tony
• [Elecraft] KX3 Problem   Bob N3MNT
• [Elecraft] KXPA100 with PX3   Bob N3MNT
• [Elecraft] KXPA100   Bob N3MNT
• [Elecraft] Battery recommendations   Bob N3MNT
• [Elecraft] KXPA-100 weight   Bob N3MNT
• [Elecraft] KXPA100 RF feedback   Bob N3MNT
• [Elecraft] K3/KX3 and Bluetooth Headphones   Bob N3MNT
• [Elecraft] Anything to be "aware of" when connecting KX3 to new KXPA100?   Bob N3MNT
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Bob N3MNT
• [Elecraft] KX3 internal battery problem   Bob N3MNT
• [Elecraft] How about a K3S for only $20?!?!   Alan Sewell N5NA
• [Elecraft] WTB - KX2   Chris Tate - N6WM
• [Elecraft] Antenna switches   Jim N7US
• [Elecraft] Is it just me?   Wes N7WS
• [Elecraft] Upgrade of K3 control of KPA500   NW0M
• [Elecraft] Rotating Macros and the K-Pod ?   NW0M
• [Elecraft] Please do a KPA1500   Nels Nelsen
• [Elecraft] KXAT1 available free   Bob Nelson
• [Elecraft] K3S Set-up for WSJT-X   Bob Nielsen
• [Elecraft] KPA500 Temps?   Arthur Nienhouse
• [Elecraft] Antenna switches   Robert Nobis
• [Elecraft] Antenna switches   Robert Nobis
• [Elecraft] MH3 mic with the K3?   Nr4c
• [Elecraft] KXPA100 with PX3   Nr4c
• [Elecraft] Morse reader on KX2   Nr4c
• [Elecraft] K3s meter   Nr4c
• [Elecraft] K3s meter   Nr4c
• [Elecraft] KX3 serial number doesn't match   Nr4c
• [Elecraft] NPOTA LOCATION   Nr4c
• [Elecraft] WSJT-X Problem with K3S   Nr4c
• [Elecraft] WSJT-X Problem with K3S   Nr4c
• [Elecraft] Problem setting up K3s with WSJTv1.7   Nr4c
• [Elecraft] P3 TX Monitor with Two Sensors?   Nr4c
• [Elecraft] K3s-wsjt-wspr   Nr4c
• [Elecraft] KAT500 - Earthing Post   Nr4c
• [Elecraft] WSJT-X Problem with K3S   Nr4c
• [Elecraft] Strange behavior on K3 system when transmitting   Nr4c
• [Elecraft] More KX2 recieve questions   Nr4c
• [Elecraft] K3: past chirp report   Nr4c
• [Elecraft] K3 names on ANT1 and ANT2   Nr4c
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Nr4c
• [Elecraft] Looking for a K3/K3S   Nr4c
• [Elecraft] Strange problem with K3s/10: could use some suggestions   Nr4c
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Nr4c
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Nr4c
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Nr4c
• [Elecraft] Random wire lengths for antennas   Nr4c
• [Elecraft] Alaska Emergency Frequency 5.1675 MHz USB   Nr4c
• [Elecraft] KX3 internal battery problem   Nr4c
• [Elecraft] K3 VFO link not working   Nr4c
• [Elecraft] KAT 3 Tuner   Nr4c
• [Elecraft] Why no love for the 1khz CW filter?   Nr4c
• [Elecraft] KPA500 Power Supply Environmental/Ergonomic Issue   Nr4c
• [Elecraft] Elecraft Support   Jessie Oberreuter
• [Elecraft] Battery recommendations   Keith Onishi
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   David Orman
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   David Orman
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   David Orman
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   David Orman
• [Elecraft] KXPA100 RS-232 problem   David Orman
• [Elecraft] best agc setting for the k3s   NOEL POULIN
• [Elecraft] K-POD CABLE LENGTH   NOEL POULIN
• [Elecraft] k-pod data cable   NOEL POULIN
• [Elecraft] FS Elecraft W2 Wattmeter with HF 2kw coupler   Paul
• [Elecraft] Sold - Elecraft W2 Wattmeter with HF 2kw coupler   Paul
• [Elecraft] KX3 internal battery problem   Mark Petiford
• [Elecraft] Elecraft Digest, Vol 153, Issue 41   Mark Petiford
• [Elecraft] [K3] WTB:KAT500   Petr, OK1RP/M0SIS
• [Elecraft] [K3] WTB:KAT500   Petr, OK1RP/M0SIS
• [Elecraft] Running WSPR on KX3 using a Mac   Brian ve3bwp Pietrzyk
• [Elecraft] KXAT2: Recommended Random Wire Lengths   Brian ve3bwp Pietrzyk
• [Elecraft] (no subject)   Brian ve3bwp Pietrzyk
• [Elecraft] KXAT2: Recommended Random Wire Lengths   Brian “VE3BWP” Pietrzyk
• [Elecraft] (no subject)   Brian “VE3BWP” Pietrzyk
• [Elecraft] (no subject)   Brian “VE3BWP” Pietrzyk
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   John Pitz
• [Elecraft] Elecraft Support   John Pitz
• [Elecraft] Let me build you K2 or other Elecraft kit.   Alan Price
• [Elecraft] Problem with N1MM+ ansd My K3 in ARRL RTTY Test   Nathern Priddy
• [Elecraft] No output on K3   Ross Primrose
• [Elecraft] KX1 Build   R&B
• [Elecraft] P3 macros on the KPod?   Charles R.Tropp
• [Elecraft] P3 macros on the KPod?   Charles R.Tropp
• [Elecraft] K3 with Signalink or MRP40   Charles R.Tropp
• [Elecraft] Re dimmable LED, Elecraft Digest, Vol 153, Issue 14   Red
• [Elecraft] Flash   Robert Reiman
• [Elecraft] KX1 low output on 7mHz   Ron Reis
• [Elecraft] Powered Speaker for KX1   Ron Reis
• [Elecraft] KPA500 with WSJT digital modes   Jim Rhodes
• [Elecraft] FSK problem with my K3   Jim Rhodes
• [Elecraft] Is it just me?   Jim Rhodes
• [Elecraft] KX3 internal battery problem   Jim Rhodes
• [Elecraft] KX3 internal battery problem   Jim Rhodes
• [Elecraft] KX3 internal battery problem   Jim Rhodes
• [Elecraft] K3s meter   RichardG3ZIY
• [Elecraft] 1.3K-FA with internal tuner   Bill Roberson
• [Elecraft] OT (sort of) -- went from WSJT-X vs 1.6 to vs 1.7 (have a KX3) and having problems...   James Rodenkirch
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   James Rodenkirch
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   James Rodenkirch
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   James Rodenkirch
• [Elecraft] Idea: HF Flash Mobs   James Rodenkirch
• [Elecraft] 160m Doings - not totally "flash mob" but all GREAT CW fun!   James Rodenkirch
• [Elecraft] Very short 80m antenna   James Rodenkirch
• [Elecraft] Very short 80m antenna   James Rodenkirch
• [Elecraft] Anything to be "aware of" when connecting KX3 to new KXPA100?   James Rodenkirch
• [Elecraft] Anything to be "aware of" when connecting KX3 to new KXPA100?   James Rodenkirch
• [Elecraft] Random wire lengths for antennas   James Rodenkirch
• [Elecraft] KX3-KXPA100 operation   James Rodenkirch
• [Elecraft] KX3-KXPA100 operation   James Rodenkirch
• [Elecraft] KIO3 board   Ricardo A. Rodrigues
• [Elecraft] Elecraft Support   Jim Rogers
• [Elecraft] Elecraft Support   Jim Rogers
• [Elecraft] Advanced Receiver Research P50VDG 6M Preamp   Jim Rogers
• [Elecraft] I need More RX Volume on my K3, has anyone run an external audio amp?   Vic Rosenthal
• [Elecraft] KPA1500 not the whole answer   Vic Rosenthal
• [Elecraft] Antenna for 2nd receiver   Vic Rosenthal
• [Elecraft] P3 TX Monitor with Two Sensors?   Vic Rosenthal
• [Elecraft] Can I make the P3 autoadjust it's scale?   Vic Rosenthal
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Vic Rosenthal
• [Elecraft] The "Kinda Random Antenna"   Vic Rosenthal
• [Elecraft] For Sale Elecraft K1-4   Lou Roux
• [Elecraft] WTB: KFL3B-FM Crystal Filter for K3   Russ
• [Elecraft] Orlando HamCation   Scott Russell
• [Elecraft] Internet Sprints   Charles Sanders
• [Elecraft] FS PR-6 preamp   Mike Sanders
• [Elecraft] Remote Shack setup for K3 for sale   Robert Sands
• [Elecraft] KUSB Drivers for Windows 10   John Saxon
• [Elecraft] {OT} - On Professional Error   Terry Schieler
• [Elecraft] Morse reader on KX2   Emory Schley
• [Elecraft] Random wire lengths for antennas   Emory Schley
• [Elecraft] The "Kinda Random Antenna"   Emory Schley
• [Elecraft] KX3 and setting up MRP40 directions   Schumacher, Paul
• [Elecraft] K3s remote line input gain setting   Gary Schwartz
• [Elecraft] K2 on the air!   Merv Schweigert
• [Elecraft] K3 Monitor function   Edward Seeliger
• [Elecraft] K3 Monitor function   Edward Seeliger
• [Elecraft] Elecraft Digest, Vol 153, Issue 16   Dana Shtun
• [Elecraft] Elecraft Support   Johnny Siu
• [Elecraft] OT: a short presentation to a group of primary school children about radio   Johnny Siu
• [Elecraft] Digital modes   Siyfion
• [Elecraft] Source for K3 weighted knobs   Niel Skousen
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Craig Smith
• [Elecraft] K3: past chirp report   Doug Smith
• [Elecraft] KX2 Receive problem!?   Paul Smith
• [Elecraft] More KX2 recieve questions   Paul Smith
• [Elecraft] KX2 receive problems solved   Paul Smith
• [Elecraft] kx3 receiver verses k3s receiver   Igor Sokolov
• [Elecraft] K3/P3/expert 1.3KA   Igor Sokolov
• [Elecraft] K3/P3/expert 1.3KA   Igor Sokolov
• [Elecraft] SWR on 40 meters   Jim Spaulding
• [Elecraft] {OT} - On Professional Error   Jeff Stai
• [Elecraft] K3: I must have changed something ?   Ed Stallman
• [Elecraft] K3S Set-up for WSJT-X   John Stengrevics
• [Elecraft] K3S Set-up for WSJT-X   John Stengrevics
• [Elecraft] K3S Set-up for WSJT-X   John Stengrevics
• [Elecraft] K3S Set-up for WSJT-X   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X MSK144 & Transmit Delay   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] WSJT-X Problem with K3S   John Stengrevics
• [Elecraft] KPA500 with WSJT digital modes   Stew
• [Elecraft] Happy Dance   Stewart
• [Elecraft] K-Pod data wiring   Wes Stewart
• [Elecraft] K-Pod data wiring   Wes Stewart
• [Elecraft] WSJT-X Problem with K3S   Wes Stewart
• [Elecraft] K-pod issue....I think?   Wes Stewart
• [Elecraft] KPA500 Temps?   Wes Stewart
• [Elecraft] k-pod data cable   Wes Stewart
• [Elecraft] k-pod data cable   Wes Stewart
• [Elecraft] k-pod data cable   Wes Stewart
• [Elecraft] k-pod data cable   Wes Stewart
• [Elecraft] The "Kinda Random Antenna"   Wes Stewart
• [Elecraft] The "Kinda Random Antenna"   Wes Stewart
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Chip Stratton
• [Elecraft] (W1) W1 Power/SWR Meter Question   Chip Stratton
• [Elecraft] Battery recommendations   Chip Stratton
• [Elecraft] K2 Filter question   Robert G Strickland
• [Elecraft] K2 on the air!   Robert G Strickland
• [Elecraft] Elecraft] Idea: HF Flash Mobs   Robert G Strickland
• [Elecraft] KX3/KX2 voltage display   E T
• [Elecraft] KX3/KX2 voltage display   E T
• [Elecraft] KXPA100 RF feedback   E T
• [Elecraft] KXPA100 RF feedback   E T
• [Elecraft] Powered Speaker for KX1   E T
• [Elecraft] KX3 Gain Calibration - Failing   KENT TRIMBLE
• [Elecraft] MAG LOOP ANTENNAS   KENT TRIMBLE
• [Elecraft] So glad I asked   Ken Talbott
• [Elecraft] Elecraft Website Hacked?   Ken Talbott
• [Elecraft] Random wire lengths for antennas   Ken Talbott
• [Elecraft] [K2] KAT2 sometimes no output and error E216 or E232 :: serialno. 4037   Frank Talens
• [Elecraft] K3 Utility Not Connecting (Virtual Windows Environment may be a factor)   Rick Tavan
• [Elecraft] Tandem operation of KPA and ACOM 1500   Rick Tavan
• [Elecraft] K3 RemoteRig Issue - Remote radio won't power off fully   Rick Tavan
• [Elecraft] FOR SALE: KX3 and PX3   Mark Tellez
• [Elecraft] All the Amplifier Discussions   Terry
• [Elecraft] KX3 internal battery problem   Lee Thompson
• [Elecraft] KX3 internal battery problem   Lee Thompson
• [Elecraft] K3 - stuck at MCU LD we upgrading software   George Thornton
• [Elecraft] K3 - stuck at MCU LD we upgrading software   George Thornton
• [Elecraft] KX3 Switch Tones   Thorpe, Jeffrey
• [Elecraft] Random wire lengths for antennas   Thorpe, Jeffrey
• [Elecraft] Macro for text decode   Tom
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Tom
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Tom
• [Elecraft] Powered Speaker for KX1   Tom
• [Elecraft] Is it just me?   Tom
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Tom
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Tom
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Tom
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Tom
• [Elecraft] FS K2/100   Peter Torry
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Ramon Tristani
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   Doug Turnbull
• [Elecraft] I need More RX Volume on my K3, has anyone run an external audio amp?   Walter Underwood
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Walter Underwood
• [Elecraft] Elecraft Support   Walter Underwood
• [Elecraft] Battery recommendations   Walter Underwood
• [Elecraft] Battery recommendations   Walter Underwood
• [Elecraft] Audio Output Impedance of the KX3   Walter Underwood
• [Elecraft] Audio Output Impedance of the KX3   Walter Underwood
• [Elecraft] Running WSPR on KX3 using a Mac   Walter Underwood
• [Elecraft] Powered Speaker for KX1   Walter Underwood
• [Elecraft] Anything to be "aware of" when connecting KX3 to new KXPA100?   Walter Underwood
• [Elecraft] Random wire lengths for antennas   Walter Underwood
• [Elecraft] Macro for text decode   VE3WDM
• [Elecraft] K-pod issue....I think?   VE3WDM
• [Elecraft] K-pod issue....I think?   VE3WDM
• [Elecraft] K2 Filter question   Mike Smith VE9AA
• [Elecraft] K2 Filter question   Mike Smith VE9AA
• [Elecraft] Source for K3 weighted knobs   Mike Smith VE9AA
• [Elecraft] Idea: HF Flash Mobs   Mike Smith VE9AA
• [Elecraft] KX3/KX2 voltage display   Marc Veeneman
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Marc Veeneman
• [Elecraft] K3S Set-up for WSJT-X   Marc Veeneman
• [Elecraft] Battery Leakage   Marc Veeneman
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   Peter D. Vouvounas
• [Elecraft] F.S. KX3 and accessories   Joe W2KJ
• [Elecraft] F.S. KX3   Joe W2KJ
• [Elecraft] KX3 for sale   Joe W2KJ
• [Elecraft] Audio Output Impedance of the KX3   Joe W2KJ
• [Elecraft] NAQCC 160 Meter Sprint Tuessday Night   Larry W2LJ
• [Elecraft] ALC on line in?   Jamie WW3S
• [Elecraft] K3 - stuck at MCU LD we upgrading software   James Walker
• [Elecraft] K3 - stuck at MCU LD we upgrading software   James Walker
• [Elecraft] K3 - stuck at MCU LD we upgrading software   James Walker
• [Elecraft] Power supply voltage sag during transmit   James Walker
• [Elecraft] Fldigi - K3 connection   Brian Waterworth
• [Elecraft] Fldigi - K3 connection   Brian Waterworth
• [Elecraft] K2 on the air!   Gary Watson
• [Elecraft] FS: Selling my K2   Paul Webb
• [Elecraft] Elecraft Digest, Vol 153, Issue 1   Steve Webre
• [Elecraft] Macro for text decode   Mike Weir
• [Elecraft] K-pod issue....I think?   Mike Weir
• [Elecraft] KX3 For Sale   Bill Wetherill
• [Elecraft] Elecraft KX3 Still For Sale   Bill Wetherill
• [Elecraft] SWR on 40 meters   Mike Wetzel
• [Elecraft] kx3 receiver versus K3s receiver   Brendon Whateley
• [Elecraft] KAT 3 Tuner   Marvin Wheeler
• [Elecraft] 4O3A Coaxial Transfer Switch   Ken Widelitz
• [Elecraft] K3 DATA A Mode not working   Bill Wiehe
• [Elecraft] K3 DATA A Mode not working (Resolved)   Bill Wiehe
• [Elecraft] Tuneup, Rescue, Build your K2, K1, KX1, others   Alan D. Wilcox
• [Elecraft] MH3 mic with the K3?   Don Wilhelm
• [Elecraft] So glad I asked   Don Wilhelm
• [Elecraft] MH3 mic with the K3?   Don Wilhelm
• [Elecraft] So glad I asked   Don Wilhelm
• [Elecraft] Need help from an EZNec user on a horizontal loop question   Don Wilhelm
• [Elecraft] KXPA100 with PX3   Don Wilhelm
• [Elecraft] KX3/KX2 voltage display   Don Wilhelm
• [Elecraft] KXPA100 with PX3   Don Wilhelm
• [Elecraft] KX3 Gain Calibration - Failing   Don Wilhelm
• [Elecraft] Morse reader on KX2   Don Wilhelm
• [Elecraft] Antenna switches   Don Wilhelm
• [Elecraft] Elecraft Website Hacked?   Don Wilhelm
• [Elecraft] K2/10 Low power   Don Wilhelm
• [Elecraft] Kenwood MC-50 Mic and K2   Don Wilhelm
• [Elecraft] Kenwood MC-50 Mic and K2   Don Wilhelm
• [Elecraft] Macro for text decode   Don Wilhelm
• [Elecraft] Macro for text decode   Don Wilhelm
• [Elecraft] K3S Set-up for WSJT-X   Don Wilhelm
• [Elecraft] K3S Set-up for WSJT-X   Don Wilhelm
• [Elecraft] K3 with Signalink or MRP40   Don Wilhelm
• [Elecraft] K3s meter   Don Wilhelm
• [Elecraft] Elecraft Support   Don Wilhelm
• [Elecraft] Elecraft Support   Don Wilhelm
• [Elecraft] K2 Filter question   Don Wilhelm
• [Elecraft] Problem with my K2   Don Wilhelm
• [Elecraft] KPA-500 Running hot on 20m   Don Wilhelm
• [Elecraft] KX3 serial number doesn't match   Don Wilhelm
• [Elecraft] best agc setting for the k3s   Don Wilhelm
• [Elecraft] KIO3B RTTY AFSK problem with Transmit   Don Wilhelm
• [Elecraft] Age of K2?   Don Wilhelm
• [Elecraft] WSJT-X Problem with K3S   Don Wilhelm
• [Elecraft] WSJT-X Problem with K3S   Don Wilhelm
• [Elecraft] No output on K3   Don Wilhelm
• [Elecraft] (W1) W1 Power/SWR Meter Question   Don Wilhelm
• [Elecraft] No output on K3   Don Wilhelm
• [Elecraft] Main Menu--ATTEN function   Don Wilhelm
• [Elecraft] Orlando HamCation   Don Wilhelm
• [Elecraft] KAT500 - Earthing Post   Don Wilhelm
• [Elecraft] Source for K3 weighted knobs   Don Wilhelm
• [Elecraft] Source for K3 weighted knobs   Don Wilhelm
• [Elecraft] K3 ERR DSE   Don Wilhelm
• [Elecraft] Strange behavior on K3 system when transmitting   Don Wilhelm
• [Elecraft] K2 on 60m (K60XV)   Don Wilhelm
• [Elecraft] Source for K3 weighted knobs   Don Wilhelm
• [Elecraft] OT(sorta) Setting up KX3 for JT9 ops   Don Wilhelm
• [Elecraft] K2 on 60m (K60XV)   Don Wilhelm
• [Elecraft] K2/10 Low power   Don Wilhelm
• [Elecraft] K2 (K60XV)   Don Wilhelm
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   Don Wilhelm
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   Don Wilhelm
• [Elecraft] K3, FLDIGI, and Macintosh   Don Wilhelm
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   Don Wilhelm
• [Elecraft] K3 Transmit Issue on 80M SSB   Don Wilhelm
• [Elecraft] ALC on line in?   Don Wilhelm
• [Elecraft] KXPA100 RF feedback   Don Wilhelm
• [Elecraft] [K3S] KREF3MDKT   Don Wilhelm
• [Elecraft] K3S and WSPR   Don Wilhelm
• [Elecraft] FSK problem with my K3   Don Wilhelm
• [Elecraft] K3 Transmit Issue on 80M SSB   Don Wilhelm
• [Elecraft] KAT-500 Remote software display   Don Wilhelm
• [Elecraft] Audio Output Impedance of the KX3   Don Wilhelm
• [Elecraft] P3 TX Monitor   Don Wilhelm
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   Don Wilhelm
• [Elecraft] Anything to be "aware of" when connecting KX3 to new KXPA100?   Don Wilhelm
• [Elecraft] PX3 can see my tramsmiited signal   Don Wilhelm
• [Elecraft] Building a K2, Does anyime have a set of rework e   Don Wilhelm
• [Elecraft] Building a K2, Does anyime have a set of rework e   Don Wilhelm
• [Elecraft] Strange problem with K3s/10: could use some suggestions   Don Wilhelm
• [Elecraft] Building a K2, Does anyime have a set of rework e   Don Wilhelm
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Don Wilhelm
• [Elecraft] Just bought a K3/10. What upgrades should I get?   Don Wilhelm
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Don Wilhelm
• [Elecraft] Power supply voltage sag during transmit   Don Wilhelm
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Don Wilhelm
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Don Wilhelm
• [Elecraft] Alaska Emergency Frequency 5.1675 MHz USB   Don Wilhelm
• [Elecraft] Filters   Don Wilhelm
• [Elecraft] 9:1 Balun   Don Wilhelm
• [Elecraft] 9:1 Balun   Don Wilhelm
• [Elecraft] 9:1 Balun   Don Wilhelm
• [Elecraft] Why no love for the 1khz CW filter?   Don Wilhelm
• [Elecraft] Beware of the speaker magnet on the KX2   Steve Wilson
• [Elecraft] Elecraft Website Hacked?   Michael Wong
• [Elecraft] Dimmable LED desk lamp for operating position recommendation needed   David Woolley
• [Elecraft] Dimmable LED desk lamp   David Woolley
• [Elecraft] K3S Set-up for WSJT-X   GRANT YOUNGMAN
• [Elecraft] Thanks to Elecraft support   Carl Yaffey1
• [Elecraft] I need More RX Volume on my K3, has anyone run an external audio amp?   Harry Yingst
• [Elecraft] I need More RX Volume on my K3, has anyone run an external audio amp?   Harry Yingst
• [Elecraft] Rotating Macros and the K-Pod ?   Harry Yingst
• [Elecraft] So glad I asked   Harry Yingst
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   Harry Yingst
• [Elecraft] K-Pod data wiring   Harry Yingst
• [Elecraft] Audio artifacts in DATA A mode with KX3   Harry Yingst
• [Elecraft] Audio artifacts in DATA A mode with KX3   Harry Yingst
• [Elecraft] Macro for text decode   Harry Yingst
• [Elecraft] Macro for text decode   Harry Yingst
• [Elecraft] Macro for text decode   Harry Yingst
• [Elecraft] Elecraft Support   Harry Yingst
• [Elecraft] KPA-500 Running hot on 20m   Harry Yingst
• [Elecraft] KAT500 Utility problem   Harry Yingst
• [Elecraft] P3 TX Monitor with Two Sensors?   Harry Yingst
• [Elecraft] P3 TX Monitor with Two Sensors?   Harry Yingst
• [Elecraft] P3 TX Monitor with Two Sensors?   Harry Yingst
• [Elecraft] P3 TX Monitor with Two Sensors?   Harry Yingst
• [Elecraft] Laptop Connection to KX3   Harry Yingst
• [Elecraft] (W1) W1 Power/SWR Meter Question   Harry Yingst
• [Elecraft] Can I make the P3 autoadjust it's scale?   Harry Yingst
• [Elecraft] K3s-wsjt-wspr   Harry Yingst
• [Elecraft] KPA500 Temps?   Harry Yingst
• [Elecraft] k-pod data cable   Harry Yingst
• [Elecraft] k-pod data cable   Harry Yingst
• [Elecraft] Source for K3 weighted knobs   Harry Yingst
• [Elecraft] Source for K3 weighted knobs   Harry Yingst
• [Elecraft] T1 QRP Antenna Tuner - is U2 supposed to be a 5v or a 6v regulator?   Harry Yingst
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   Harry Yingst
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   Harry Yingst
• [Elecraft] Very short 80m antenna   Harry Yingst
• [Elecraft] What Two Bands would you pick for a K1?   Harry Yingst
• [Elecraft] What Two Bands would you pick for a K1?   Harry Yingst
• [Elecraft] What Two Bands would you pick for a K1?   Harry Yingst
• [Elecraft] Looking for a K3/K3S   Harry Yingst
• [Elecraft] What Two Bands would you pick for a K1?   Harry Yingst
• [Elecraft] Building a K2, Does anyime have a set of rework e   Harry Yingst
• [Elecraft] Building a K2, Does anyime have a set of rework e   Harry Yingst
• [Elecraft] Building a K2, Does anyime have a set of rework e   Harry Yingst
• [Elecraft] K3 - stuck at MCU LD we upgrading software   Harry Yingst
• [Elecraft] Running WSPR on KX3 using a Mac   Neil Zampella
• [Elecraft] Fldigi - K3 connection   Matt Zilmer
• [Elecraft] Antenna for 2nd receiver   Matt Zilmer
• [Elecraft] K3: past chirp report   Matt Zilmer
• [Elecraft] Random wire lengths for antennas   Matt Zilmer
• [Elecraft] The "Kinda Random Antenna" (was: Random wire lengths for antennas)   Matt Zilmer
• [Elecraft] 9:1 Balun   Matt Zilmer
• [Elecraft] Random wire lengths for antennas   a45wg
• [Elecraft] K3: past chirp report   ab2tc
• [Elecraft] KAT-500 Remote software display   ab2tc
• [Elecraft] K3 Sensitivity   ab2tc
• [Elecraft] R: {OT} - Variation on use of a coaxial switch (stan levandowski)   glcazzola at alice.it
• [Elecraft] R: best agc setting for the k3s   glcazzola at alice.it
• [Elecraft] KE7X "Elecraft Macro Programming" book - simply great...   glcazzola at alice.it
• [Elecraft] wrong macro for PF2?   glcazzola at alice.it
• [Elecraft] R: Re: wrong macro for PF2?   glcazzola at alice.it
• [Elecraft] new beta firmware for K3 - K3S   glcazzola at alice.it
• [Elecraft] K2 on the air!   AC6JA at aol.com
• [Elecraft] K3/P3/expert 1.3KA   GMuller885 at aol.com
• [Elecraft] K3 Transmit Random Cutout   pgladysz at aol.com
• [Elecraft] KXPA100 with PX3   rsoifer1 at aol.com
• [Elecraft] KXPA100 with PX3   rsoifer1 at aol.com
• [Elecraft] KXPA100   rsoifer1 at aol.com
• [Elecraft] KXPA100 with PX3   rsoifer1 at aol.com
• [Elecraft] KXPA100   rsoifer1 at aol.com
• [Elecraft] Antenna switches   brian
• [Elecraft] Very short 80m antenna   brian
• [Elecraft] K3 Sensitivity   brian
• [Elecraft] Thanks to Elecraft support   briancom
• [Elecraft] Elecraft Support   kevinr at coho.net
• [Elecraft] Elecraft CW Net Announcement   kevinr at coho.net
• [Elecraft] Elecraft Support   kevinr at coho.net
• [Elecraft] Elecraft CW Net options   kevinr at coho.net
• [Elecraft] Elecraft CW Net options   kevinr at coho.net
• [Elecraft] Elecraft CW Net Announcement   kevinr at coho.net
• [Elecraft] Elecraft CW Net Announcement   kevinr at coho.net
• [Elecraft] 9:1 Balun   kevinr at coho.net
• [Elecraft] Just bought a K3/10. What upgrades should I get?   abullington at comcast.net
• [Elecraft] Why no love for the 1khz CW filter?   abullington at comcast.net
• [Elecraft] PX3 can see my tramsmiited signal   n9tf at comcast.net
• [Elecraft] KX2 with KPA500 and KAT500   Len Chesler home email
• [Elecraft] k3 ALC problem   erz.gebirge
• [Elecraft] Elecraft-Free Straight Key Night   gliderboy1955
• [Elecraft] Battery Leakage   gliderboy1955
• [Elecraft] Mag Loop Antennas   gliderboy1955
• [Elecraft] 9:1 Balun   gliderboy1955
• [Elecraft] FSK problem with my K3   stewart at gm4aff.net
• [Elecraft] F.S. KX3 and accessories   rick jones
• [Elecraft] Battery Leakage   jonlevy73
• [Elecraft] K3: past chirp report   riese-k3djc at juno.com
• [Elecraft] KXPA100 RF feedback   john at kk9a.com
• [Elecraft] Looking for a K3/K3S   john at kk9a.com
• [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE   john at kk9a.com
• [Elecraft] {OT} - Variation on use of a coaxial switch (stan levandowski)   stan levandowski
• [Elecraft] Elecraft-Free Straight Key Night   stan levandowski
• [Elecraft] (W1) W1 Power/SWR Meter Question   stan levandowski
• [Elecraft] Upgrade of K3 control of KPA500   lmarion
• [Elecraft] Transmit CW in SSB mode with KPOD   lmarion
• [Elecraft] kx3 receiver verses k3s receiver   lmarion
• [Elecraft] Elecraft Support   lmarion
• [Elecraft] Source for K3 weighted knobs   lmarion
• [Elecraft] Solar Cycles   lmarion
• [Elecraft] Visalia Top Band Dinner   wb6rse1 at mac.com
• [Elecraft] Kenwood MC-50 Mic and K2   ken mcmahon
• [Elecraft] Kenwood MC-50 Mic and K2   ken mcmahon
• [Elecraft] K2 on the air!   ken mcmahon
• [Elecraft] Filters   mtruss
• [Elecraft] KXAT2: Recommended Random Wire Lengths   murphy
• [Elecraft] Random wire lengths for antennas   murphy
• [Elecraft] Alaska Emergency Frequency 5.1675 MHz USB   murphy
• [Elecraft] Alaska Emergency Frequency 5.1675 MHz USB   murphy
• [Elecraft] Alaska Emergency Frequency 5.1675 MHz USB   murphy
• [Elecraft] Elecraft Support   n1ix at n1ix.com
• [Elecraft] GEMS PRODUCTS... Were still here!   n6lrv at outlook.com
• [Elecraft] Headphones   pkhjr
• [Elecraft] WTB - KX2   pkhjr
• [Elecraft] unsubscribe   steve roberts
• [Elecraft] kx3 receiver verses k3s receiver   sancho
• [Elecraft] (OT) MAG LOOP ANTENNAS   sancho
• [Elecraft] Age of K2?   ac5p at sbcglobal.net
• [Elecraft] Audio Output Impedance of the KX3   ac5p at sbcglobal.net
• [Elecraft] K3S Set-up for WSJT-X   stengrevics
• [Elecraft] WSJT-X Problem with K3S   stengrevics
• [Elecraft] WSJT-X MSK144 & Transmit Delay   stengrevics
• [Elecraft] Macro for text decode   tomb18
• [Elecraft] K3 with Signalink or MRP40   tomb18
• [Elecraft] Source for K3 weighted knobs   tomb18
• [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?   tomb18
• [Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2   tomb18
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   tomb18
• [Elecraft] Elecraft Website Hacked?   Mike va3mw
• [Elecraft] K3S Set-up for WSJT-X   skline4 at verizon.net
• [Elecraft] Feature request/question?   w8zn54 at verizon.net
• [Elecraft] KAT-500 Remote software display   w4grj
• [Elecraft] Audio Output Impedance of the KX3   w7aqk
• [Elecraft] Audio Output Impedance of the KX3   w7aqk
• [Elecraft] Is it just me?   w7aqk
• [Elecraft] KX3 and data modes   ddillenburger at web.de
• [Elecraft] KX3 and paddle for digi modes, display TX text   ddillenburger at web.de
• [Elecraft] KX3 and paddle for digi modes   ddillenburger at web.de
• [Elecraft] Mint, 4 bank K1   sashangus at yahoo.com
• [Elecraft] K3S Set-up for WSJT-X   kevino z
• [Elecraft] K3S Set-up for WSJT-X   kevino z
• [Elecraft] K3S Set-up for WSJT-X   kevino z
• [Elecraft] KX3 and paddle for digi modes, display TX text   kevino z
• [Elecraft] (OT redoux) MAG LOOP ANTENNAS   kevino z
• [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?   kevino z
• [Elecraft] Morse reader on KX2   na5n at zianet.com
• [Elecraft] More KX2 recieve questions   na5n at zianet.com
• [Elecraft] What Two Bands would you pick for a K1?   na5n at zianet.com
• [Elecraft] K3: past chirp report   ww3s at zoominternet.net

Last message date: Tue Jan 31 23:42:17 EST 2017
Archived on: Tue Jan 31 23:42:20 EST 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...