[Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?

[Harry Yingst]

LP-Bridge is the free solution and you could possible even run it in a windows session under Virtual Box.


There are hardware solutions out there to do what you want. I had looked into them in the past when I was considering moving back to Linux.





      From: David Orman <ormandj at corenode.com>
 To: donwilh at embarqmail.com 
Cc: Elecraft Reflector <elecraft at mailman.qth.net>
 Sent: Friday, January 20, 2017 8:39 AM
 Subject: Re: [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?
   
Thank you (everyone). I'm a Linux user so was hoping for a HW based
solution but sounds like LP bridge is the answer based on the responses to
this thread. Dual boot, here I come.

David

On Jan 19, 2017 22:47, "Don Wilhelm" <donwilh at embarqmail.com> wrote:

> David,
>
> The LP-Bridge application has an output that you can set up which will
> send some information to another serial port on the computer.  See the
> LP-Bridge documentation at www.telepostinc.com.
>
> 73,
> Don W3FPR
>
> On 1/19/2017 10:53 PM, David Orman wrote:
>
>> Hi Don,
>>
>> This is what I'm currently doing. I need an additional RS232 output in
>> addition to the connection to the PC for an external device that needs to
>> track the vfo frequency of the KX3. I'd like to have the PC able to track
>> what frequency/control what frequency my radio is tuned to, and at the same
>> time have my external device also tracking the frequency the KX3 is tuned
>> to. I apologize for being less than clear. :)
>>
>> David
>>
>>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com