[Elecraft] K3 with Signalink or MRP40

[tomb18]

Hi I just looked at the manual.The mrp40 will use SSB for CW transmission or DATA A with a signal link.  Since you say it works in DATA A that is how it works. If you wish true CW they give a link to use the key circuit with a hardware adapter.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Gerald Manthey <kc6cnn at gmail.com> Date: 2017-01-06  3:56 PM  (GMT-05:00) To: tomb18 <tomb18 at videotron.ca> Subject: Re: [Elecraft] K3 with Signalink or MRP40 
TomI can send in Data A , but was hoping to use com0com to connect it in CW.  
Gerald 
On Jan 6, 2017, at 9:07 AM, tomb18 <tomb18 at videotron.ca> wrote:

Any luck? Did you follow my suggestions?Tom


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: KC6CNN <kc6cnn at gmail.com> Date: 2017-01-05  9:10 PM  (GMT-05:00) To: elecraft at mailman.qth.net Subject: [Elecraft] K3 with Signalink or MRP40 
Has anyone used MRP40 with success with the K3 or with a K3 and signalink
usb?
I have tried and tried to get this to work. 
It will key the signalink and will key the radio, but no output or audio is
transmitted. 
Sending the audio to my speakers works, but not to the radio. 
I have set jumper jp2 and jp3 to on which raises the output level of the
signalink. 
I have adjusted the windows audio level and still nothing. 

So any suggestions would be appreciated. 

Thank
Gerald - KC6CNN






-----
KC6CNN - Gerald
K1 # 0014
K3 # 6294
KX3 # 757
--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca