[Elecraft] K3 with Signalink or MRP40

[KC6CNN]

Much easier to just use Win4k3. I'm thinking of adding AC Log.  But that MRP40 sure can decode like crazy and in bad band conditions.  

Thanks 
Gerald 

> On Jan 6, 2017, at 4:12 PM, tomb18 [via Elecraft] <ml-node+s365791n7625519h70 at n2.nabble.com> wrote:
> 
> Hi I just looked at the manual.The mrp40 will use SSB for CW transmission or DATA A with a signal link.  Since you say it works in DATA A that is how it works. If you wish true CW they give a link to use the key circuit with a hardware adapter.73 Tom va2fsq.com  
> 
> 
> Sent from my Samsung Galaxy smartphone. 
> -------- Original message --------From: Gerald Manthey <[hidden email]> Date: 2017-01-06  3:56 PM  (GMT-05:00) To: tomb18 <[hidden email]> Subject: Re: [Elecraft] K3 with Signalink or MRP40 
> TomI can send in Data A , but was hoping to use com0com to connect it in CW.   
> Gerald  
> On Jan 6, 2017, at 9:07 AM, tomb18 <[hidden email]> wrote: 
> 
> Any luck? Did you follow my suggestions?Tom 
> 
> 
> Sent from my Samsung Galaxy smartphone. 
> -------- Original message --------From: KC6CNN <[hidden email]> Date: 2017-01-05  9:10 PM  (GMT-05:00) To: [hidden email] Subject: [Elecraft] K3 with Signalink or MRP40 
> Has anyone used MRP40 with success with the K3 or with a K3 and signalink 
> usb? 
> I have tried and tried to get this to work. 
> It will key the signalink and will key the radio, but no output or audio is 
> transmitted. 
> Sending the audio to my speakers works, but not to the radio. 
> I have set jumper jp2 and jp3 to on which raises the output level of the 
> signalink. 
> I have adjusted the windows audio level and still nothing. 
> 
> So any suggestions would be appreciated. 
> 
> Thank 
> Gerald - KC6CNN 
> 
> 
> 
> 
> 
> 
> ----- 
> KC6CNN - Gerald 
> K1 # 0014 
> K3 # 6294 
> KX3 # 757 
> -- 
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485.html
> Sent from the Elecraft mailing list archive at Nabble.com. 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email] 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email] 
> 
> If you reply to this email, your message will be added to the discussion below:
> http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625519.html
> To unsubscribe from K3 with Signalink or MRP40, click here.
> NAML




-----
KC6CNN - Gerald
K1 # 0014
K3 # 6294
KX3 # 757
--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625520.html
Sent from the Elecraft mailing list archive at Nabble.com.