[Elecraft] K3 with Signalink or MRP40

KC6CNN kc6cnn at gmail.com
Fri Jan 6 15:53:07 EST 2017


It decodes great, it did not send.  I can send in data A. But offset is weird to me.  
I'll get it sorted.  Lol 
Thanks 
Gerald 

> On Jan 6, 2017, at 8:58 AM, Elecraft mailing list [via Elecraft] <ml-node+s365791n7625506h67 at n2.nabble.com> wrote:
> 
> Gerald, 
> I assume you are using MRP40 to decode CW. Are you saying that it does not decode at all? Or just some of the time? What are your settings on the Signal Link and in the MRP40 software tab for the Soundcard? 73, Charles N2SO 
> Treasurer, Quarter Century Wireless Association, Inc. http://QCWA.org  
> 
>     On Friday, January 6, 2017 9:37 AM, Don Wilhelm <[hidden email]> wrote: 
>   
> 
>  Gerald, 
> 
> The Signalink is nothing more than a soundcard. 
> Have you plugged the Signalink output into the Line-in jack on the K3? 
> Make certain the plug is fully inserted. 
> Then go into DATA A mode and set the MIC SEL menu to LINE. 
> Adjust the MIC Gain (now LINE IN gain) to produce 4 bars solid with the 
> 5th bar flashing on the ALC meter - You can do that is TX TEST mode so 
> you do not transmit RF. 
> If the MIC GAIN is 'touchy' and at a very low level, go to the computer 
> and adjust the soundcard level lower.  Normally a soundcard level of 
> about 75% is workable - too low and the S/N ratio is bad and too high 
> the soundcard can overload. 
> 
> 73, 
> Don W3FPR 
> 
> On 1/5/2017 9:10 PM, KC6CNN wrote: 
> > Has anyone used MRP40 with success with the K3 or with a K3 and signalink 
> > usb? 
> > I have tried and tried to get this to work. 
> > It will key the signalink and will key the radio, but no output or audio is 
> > transmitted. 
> > Sending the audio to my speakers works, but not to the radio. 
> > I have set jumper jp2 and jp3 to on which raises the output level of the 
> > signalink. 
> > I have adjusted the windows audio level and still nothing. 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email] 
> 
> 
>     
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email] 
> 
> If you reply to this email, your message will be added to the discussion below:
> http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625506.html
> To unsubscribe from K3 with Signalink or MRP40, click here.
> NAML




-----
KC6CNN - Gerald
K1 # 0014
K3 # 6294
KX3 # 757
--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625518.html
Sent from the Elecraft mailing list archive at Nabble.com.


More information about the Elecraft mailing list