[Elecraft] Fldigi - K3 connection

[Matt Zilmer]

Hi George,

Do you mean DATA/USB/CW/etc. mode information, or something else?  I 
have fldigi 3.22 displaying DATA mode during normal operation, using 
Rigcat and K3.XML as the rig control template.  Are you saying you can't 
see a mode change after accessing the drop-down (next to the main 
frequency readout)?  You should be able to see mode and filter, and you 
should be able to change them.

73,

matt W6NIA


On 1/1/2017 7:02 AM, George Kidder wrote:
> Hi gang,
> I am running fldigi with my K3, and everything works as indicated in 
> the manual.  It would be useful if fldigi was able to poll the K3 for 
> mode information, and set itself accordingly.  I suspect that a 
> modification of the K3.xml file might accomplish this, but I don't 
> know enough about the programming to see where.
>
> Has anyone succeeded in getting mode information from the K3 to fldigi?
>
> Thanks,
> George, W3HBM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mzilmer at roadrunner.com

-- 
Always store beer in a dark place.  - R. Heinlein

Matt Zilmer, W6NIA
[Shiraz]