[Elecraft] Fldigi - K3 connection

[Brian Waterworth]

Yes, I have had success with my KX3 and FlDigi by modifying the rig xml for
the K3 as a starting point.  Here is the howto:
http://www.w1hkj.com/FldigiHelp/rig_xml_page.html

It took me a little longer to figure out the xml file's relationships, but
this howto didn't exist then.

Once you see the linkages among the various XML elements, you will be
changing the k3.xml file with ease.

Have fun !!

regards,
Brian
VE3IBW / CG3IBW
Canada's Sesquicentennial (https://wp.rac.ca/special-event-canada150/)


On Sun, Jan 1, 2017 at 10:02 AM, George Kidder <gkidder at ilstu.edu> wrote:

> Hi gang,
> I am running fldigi with my K3, and everything works as indicated in the
> manual.  It would be useful if fldigi was able to poll the K3 for mode
> information, and set itself accordingly.  I suspect that a modification of
> the K3.xml file might accomplish this, but I don't know enough about the
> programming to see where.
>
> Has anyone succeeded in getting mode information from the K3 to fldigi?
>
> Thanks,
> George, W3HBM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to brian.waterworth at gmail.com
>