[Elecraft] Fldigi - K3 connection

[George Kidder]

Hi Brian,

Thanks for the reply.  I had found that "howto" file, but can't make 
much sense of it.  The current K3.xml file relays changes between the 
rig and the two little blue boxes under the frequency display, but these 
changes are not reflected in the fldigi operate mode, nor do changes in 
the op mode result in changes in the K3. Nor do the changes in these 
little boxes get reflected in the log entry, which is very annoying.

So do your modifications correct these problems?  If so, could I have a 
copy of it.

73 and Happy New Year,

George


On 1/1/2017 10:37 AM, Brian Waterworth wrote:
> Yes, I have had success with my KX3 and FlDigi by modifying the rig xml for
> the K3 as a starting point.  Here is the howto:
> http://www.w1hkj.com/FldigiHelp/rig_xml_page.html
>
> It took me a little longer to figure out the xml file's relationships, but
> this howto didn't exist then.
>
> Once you see the linkages among the various XML elements, you will be
> changing the k3.xml file with ease.
>
> Have fun !!
>
> regards,
> Brian
> VE3IBW / CG3IBW
> Canada's Sesquicentennial (https://wp.rac.ca/special-event-canada150/)
>
>
> On Sun, Jan 1, 2017 at 10:02 AM, George Kidder <gkidder at ilstu.edu> wrote:
>
>> Hi gang,
>> I am running fldigi with my K3, and everything works as indicated in the
>> manual.  It would be useful if fldigi was able to poll the K3 for mode
>> information, and set itself accordingly.  I suspect that a modification of
>> the K3.xml file might accomplish this, but I don't know enough about the
>> programming to see where.
>>
>> Has anyone succeeded in getting mode information from the K3 to fldigi?
>>
>> Thanks,
>> George, W3HBM
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to brian.waterworth at gmail.com
>>