[Elecraft] Macro for text decode

[Ron D'Eau Claire]

As Don noted, it should be quite simple. 

SWH40; 

Toggles the text decode function. 

Use the VFOB knob to choose the speed range, threshold setting or OFF. 

I assume you want to control Text Decode remotely with a KPOD since it gains
you nothing to assign that to one of the K3 front panel switches instead of
pressing the K3 TXT DEC switch. 

You can assign that macro to any of the first 16 locations in the K3 so you
can launch it from the KPOD. Use the KPOD rocker switch to enable control of
the VFO B function at the KPOD to choose the speed range, threshold setting
or OFF.  

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Tuesday, January 3, 2017 6:03 PM
To: Mike Weir; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Macro for text decode

Mike,

A macro that will operate the CWT button would be in order - nothing
complicated at all.

73,
Don W3FPR

On 1/3/2017 7:26 PM, Mike Weir wrote:
> I checked the archives looking for information regarding a macro for the
K3 that will turn the text decode on and off. The most recent archive
regarding this was from 2013 saying there was none. It's now 2017 and
wondering if a macro has been written to preform this function?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at cobi.biz