[Elecraft] K3 DATA A Mode not working

[Barry]

Bill,
     Make sure the JT65 program knows to use your sound card for in and 
out, and that you have levels set correctly. If there are multiple cards 
attached to your computer, you could have inadvertently picked the wrong 
one. At some point, all of use will have done that a few times. :-)

73,
Barry
K3NDM

------ Original Message ------
From: "Bill Wiehe via Elecraft" <elecraft at mailman.qth.net>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: 1/9/2017 9:21:02 PM
Subject: [Elecraft] K3 DATA A Mode not working

>I recently downloaded a JT65 program and after several days of flawless 
>operation, my K3 stopped transmitting in DATA A mode. The K3 keys but 
>nothing is transmitted and no power out. I changed over to BPSK31 via 
>HRD  using DATA A with the same results. All the other modes (RTTY FSK, 
>CW, SSB) work fine with no issues. Only DATA A seems impacted. I 
>reloaded the Firmware from the website and went through the 
>Configuration tables and that all that appears correct.I must have 
>missed something  someplace so any help would be appreciated.Thanks, 
>Bill-W0BBI
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net