[Elecraft] K-Pod question

[Cady, Fred]

Unfortunately you can't use that Config menu directly in a macro to execute with a KPod switch.  You could assign it to a PF key and then make a macro that holds that key and then have the KPod execute the macro.

Fred


________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Joe Subich, W4TV <lists at subich.com>
Sent: Monday, January 16, 2017 3:20 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K-Pod question



On 1/16/2017 11:44 AM, Dave Fugleberg wrote:
> I experimented a bit with the method suggested by Fred, using VFO-B
> to 'mark' the next signal up the band, and then using A/B to 'jump'
> to it. That works, but of course after each 'jump', VFO-B is at the
> frequency of the previous QSO.

The K3 contains CONFIG:FUNCTION VFO B->A by assigning that function to
one of the PF keys, you could use the PF key instead of A/B and avoid
the "extra" twiddling of VFO B <G>.

73,

    ... Joe, W4TV


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu