[Elecraft] K-Pod question

[Joe Subich, W4TV]

> You could assign it to a PF key and then make a macro that holds
> thatkey and then have the KPod execute the macro.

That's what I said ... assign Function VFO B -> A to one of the PF
keys (e.g. PF1) and use it instead of A/B.  It's actually closer
to the VFO B knob than A/B and easier to reach.

73,

    ... Joe, W4TV


On 1/16/2017 5:26 PM, Cady, Fred wrote:
> Unfortunately you can't use that Config menu directly in a macro to execute with a KPod switch.  You could assign it to a PF key and then make a macro that holds that key and then have the KPod execute the macro.
>
> Fred
>
>
> ________________________________
> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Joe Subich, W4TV <lists at subich.com>
> Sent: Monday, January 16, 2017 3:20 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K-Pod question
>
>
>
> On 1/16/2017 11:44 AM, Dave Fugleberg wrote:
>> I experimented a bit with the method suggested by Fred, using VFO-B
>> to 'mark' the next signal up the band, and then using A/B to 'jump'
>> to it. That works, but of course after each 'jump', VFO-B is at the
>> frequency of the previous QSO.
>
> The K3 contains CONFIG:FUNCTION VFO B->A by assigning that function to
> one of the PF keys, you could use the PF key instead of A/B and avoid
> the "extra" twiddling of VFO B <G>.
>
> 73,
>
>     ... Joe, W4TV
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at montana.edu
>
>