[Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Fri Jan 27 23:21:21 EST 2017

Fine, but do not address that to me. I am NOT the list moderator. That is up
to Eric. 

Ron 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Raymond Benny
Sent: Friday, January 27, 2017 6:51 PM
To: Ron D'Eau Claire
Cc: Elecraft Reflector
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Ron,

I do not agree.

Elecraft reflector should be about Elecraft products. Just like my Toyota
Tundra reflector, only Tundra products and happenings are discussed.

If the moderator allows anything, I maybe asking for receipts for chocolate
cookies to eat so that I can have a snack while operating my K3...

My 2 cents,

Ray,
N6VR

On Fri, Jan 27, 2017 at 6:12 PM, Ron D'Eau Claire <ron at cobi.biz> wrote:

> You can be sure if a post does not belong here Eric, the list 
> moderator, will say so.
>
> In his previous posts, Eric has stressed that *anything* of interest 
> in setting up and operating a Ham station or in promoting Amateur 
> Radio is okay provided the posters use discretion in the number of 
> posts on a given subject.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> Bill Johnson
> Sent: Friday, January 27, 2017 4:48 PM
> To: 'Raymond Benny'; 'Elecraft Reflector'
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 
> F4PNM new in box connectors FOR SALE
>
> Ray,  Thank you.  I mistakenly posted on the reflector in response to 
> another thread then realized it was off topic, corrected it without 
> thinking.  I will post this as it is not conforming with list rules 
> and I do apologize.  MEA COPA as my wife with prompt me.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> Raymond Benny
> Sent: Friday, January 27, 2017 2:10 PM
> To: TowerTalk at contesting.com
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 
> F4PNM new in box connectors FOR SALE
>
> Bill,
>
> I will be buying a 250 - 300 ft spool of 1/2" hardline from a local 
> salvage/surplus store for $100. Guess you would consider it NOS. The 
> wooden spools themselves are in poor shape. Not certain that it is 
> Andrews coax, if not, its a very good copy.
>
> Like John says, you buy it when you find a good bargain. Same with 
> connectors; at swap meets, used connectors are typically no more that 
> $5 each. I guess if someone needs some hardline now, and could pick it 
> up locally, yours would be a fair price.
>
> You can also often find 7/8", 100 - 130 ft  hardline pieces  for about 
> $1 a foot. Sometimes they may have a connector on one end included.
>
> BTW, I agree with others, this is not an subject Elecraft and does not 
> belong here. I'm sending this email to the "TowerTalk" reflector where 
> it really should be.
>
> 73,
>
> Ray,
> N6VR
>
> On Fri, Jan 27, 2017 at 10:32 AM, john at kk9a.com <john at kk9a.com> wrote:
>
> > Once I had an item for sale (on a real swap site) and someone 
> > pointed out that my pricing was incorrect and too high. After some 
> > research I realize that he was correct I was grateful for the 
> > information. Since then I have notified a few people selling items 
> > when their pricing is way out of line and most became offended, so I 
> > quit doing this. Often new items were selling for the same price or
less.
> >
> > FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and 
> > FSJ4 for ~$1/ft in the surplus market. However you have to buy it 
> > when you see it as it is not always available and you have take 
> > whatever length the coil happens to be.
> >
> > John KK9A
> >
> > from: Bill Johnson k9yeq
> >
> > Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the 
> > stuff you mention.  The connectors are Andrews as well and are kits 
> > to
> install.
> > I
> > don't remember what I paid but may have been about what you did.  
> > The connectors were another story.  I lucked out with them.  They 
> > appear to be lower in price.  I will match whatever someone comes up 
> > with and can give me a link to verify.  This is excess to my needs 
> > and all I want is fair price.
> > This would only be useful for UHF and higher unless you are talking 
> > max power and low loss.
> >
> > 73,
> > Bill
> > K9YEQ
> >
> > -----Original Message-----
> > From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On 
> > Behalf Of Jim Brown
> > Sent: Thursday, January 26, 2017 5:18 PM
> > To: elecraft at mailman.qth.net
> > Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 
> > F4PNM new in box connectors FOR SALE
> >
> > FWIW -- I've bought a lot of used hard line, and I've never paid 
> > more than a buck a foot for cut lengths of 1/2-in hard line in good 
> > or even new condition. About five years ago, I paid $100 for 100 ft 
> > of LDF4-50 (1/2-in
> > Andrew) brand new. Don't remember if it had connectors on it or if I 
> > bought them separately.
> >
> > 73, Jim K9YC
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this 
> > email
> > list: http://www.qsl.net/donate.html Message delivered to 
> > rayn6vr at gmail.com
> >
>
>
>
> --
> Ray,
> N6VR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> k9yeq at live.com 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> ron at elecraft.com
>
>

--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com