[Elecraft] K-Pod question

[Cady, Fred]

How about using the KPod to tune VFO B and then have a macro that swaps A/B.  Or just run SO2V.


________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Dave Fugleberg <dave.w0zf at gmail.com>
Sent: Sunday, January 15, 2017 7:44 PM
To: Elecraft List
Subject: [Elecraft] K-Pod question

When the K-Pod was first introduced, there was some indication that a
future enhancement would allow it to control the P3 - specifically, to
adjust the markers and 'tap to QSY'.

Is this feature available yet, or imminent?

I discovered that the P3 is pretty useful for unassisted search and pounce
in last weekend's RTTY contest - While working one station on VFO-A, I'd
move marker A up to the 'mark' tone of the next RTTY signal up the band. As
soon as the QSO was logged, a tap on the P3 knob would jump to the next
station to work.  Then move Marker A again and repeat. With a little
practice, and the SPAN set fairly narrow, I could nail the tuning every
time, provided I didn't bump the P3 knob when tapping it.

Although that worked well, it was a lot of reaching to the P3. It would be
a BIG improvement if a K-Pod, right next to the keyboard, could control
those functions.

Can it?

73 DE W0ZF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu