[Elecraft] Antenna for 2nd receiver

[Paul Van Dyke]

I broke down and bought a K3s and now I'm going to have the second
receiver. Can somebody tell me a good antenna to put on there as I will be
using a TH11DX as the main antenna

Thank you
Paul - KB9AVO

On Jan 2, 2017 2:05 PM, "Rick Tavan" <rick at tavan.com> wrote:

Looking for a sounding board here to jump-start my brain. I run Windows 7
under VMware Fusion on a Macbook Pro. Although it's a difficult environment
to maintain, most Windows software works well. I run RemoteRig boxes to
connect a local K3 acting as a control head to a remote K3. The RemoteRig
box presents the remote K3's serial port as a local port (COM12 today) and
both Writelog and N1MM+ can connect to it and control the remote radio.
Right now, however, K3 Utility and K3 Memory Editor are not connecting to
it. (Yes, I terminated the loggers before trying the Elecraft apps.) I'm
pretty sure this configuration used to work, so I'm baffled. Usually it's
the other way around - a COM port has changed and I use K3 Utility to
discover which new port number to specify in the logger. But today the
logger connects and Utility doesn't.

If I eliminate the RemoteRig boxes and associated K3 Remote firmware, both
K3 Utility and the logger connect to the local K3 just fine from the
virtual Windows OS. I'm running FW Rev 5.55 on both K3's.

Any ideas?

Thanks,

/Rick N6XI

--

Rick Tavan
Truckee, CA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pvandyke1953 at gmail.com