[Elecraft] OT(sorta) Setting up KX3 for JT9 ops

[Don Wilhelm]

Jim,

JTx is no different than any other soundcard data mode.
Use DATA A
Set the audio input to the KX3 so you have 4 bars solid on the ALC meter 
with the 5th bar flashing.  Once you have the audio level set, leave it 
that way.
Control the power output with the POWER knob.
Ignore the advice in the JTx information and on the internet to control 
the power with the audio level - that is for non-Elecraft transceivers.

Any differences in the various soundcard data modes will be found in the 
software application used, not in the KX3 setup.

73,
Don W3FPR

On 1/19/2017 8:20 AM, James Rodenkirch wrote:
> Anyone operating JT(? If so, anything peculiar for setting up ALC in JT9 versus JT65??
>
> Offline replies "ok."
>