[Elecraft] P3 TX Monitor with Two Sensors?

[Jean-François Ménard]

Hi everybody,

Thanks to Vic 4X6GP for the tips. 

I asked earlier today to Elecraft support to have an update on if we would like to use already own antenna coupler for those who already own an Elecraft W2.

There is the information I received from Elecraft support :

[ELECRAFT] If the W2 has been bought later half of 2016, it should be OK.  If it is older than that, he will need to either get new couplers or Remove and Replace several surface mount components.

And the modification to use older antenna couplers version consist of the following modifications: 

[ELECRAFT] You'll need to change C5 ,C6 and C7 to the updated value 470 pF

I will need to modify both couplers that I have. The 8 pole relay is an excellent idea. And to change from coupler 1 to coupler 2, I am planning to use the AUX from the K-Pod.


Best 73 de Jeff | VA2SS 

__________________________________________
Jeff | VA2SS
Jean-François Ménard

jean-francois.menard at va2ss.com <mailto:jean-francois.menard at va2ss.com>
www.VA2SS.com <http://www.va2ss.com/>

Membre de / Member of :
ARRL / AMSAT / QRP ARCI / FISTS / SKCC / MICHIGAN QRP CLUB

Message envoyé à partir de mon appareil mobile.
Message sent from my portable device.