[Elecraft] KXPA100

[rsoifer1 at aol.com]

Don and all,


The KXPA100 is working fine now, well within specs.  



You were right again; the system was way out of calibration.  All told, there were two problems: the calibration and the RJ-45 connectors in the control cable.


I also replaced the 22A switching power supply with a big old 35A linear supply that just loafs at the 14.5A current drain from the KXPA100.


Many thanks to all on the Elecraft reflector.


73 Ray W2RS