[Elecraft] K3 RemoteRig Issue - Remote radio won't power off fully

[Fred Jensen]

I had a similar [but not exactly the same] problem when first 
configuring for the W7RN remote.  Brandon's analysis was that the RS-232 
cable between K3 and RRC was intermittent.  Turned out he was right, I 
finally did the deoxit thing and worked with them, and when finally 
seated tightly, problem solved.  I don't know if you've had to change 
that but it might be worth a check.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 1/27/2017 10:22 AM, Rick Tavan wrote:
> Recently I had to replace the router at my remote site. The replacement
> router is the same model as its predecessor (Cisco EA4500). I had good, but
> possibly imperfect, records of the port forwarding setup which I reproduced
> on the replacement router. Now, pressing POWER on the Control K3 turns the
> Remote K3 ON and operates correctly, but when I turn off the Control K3,
> the Remote K3 stays on. If I then tap the POWER button on the Remote K3,
> its screen goes solid amber with no LCD segments lit, but it does not fully
> power down. It also becomes catatonic, its own POWER button useless, but
> it's still responsive to power on from the Control K3. I have Restarted
> both RemoteRig boxes to no avail. I have confirmed that my DDNS real IP
> address is correct.
>
> In case it's material, here are the port forwards I have in place:
>
> RRC UPD Cmd 10000
> RRC UDP Audio 11000
> RRC Web 5058
> RRC Telnet 5059
> RRC SIP 5088
>
> All port forwards are set the same for both internal and external use, both
> TCP and UDP protocols, LAN address of the RRC.
>
> Is something missing? Any suggestions?
>
> Thanks,
>
> /Rick N6XI
>