[Elecraft] New release of Win4K3Suite supporting the SDRPlay RSP2

[Tom]

When using WinKey with the K3S in semi-break in mode how do you adjust the
timing so that the K3S does not drop out between the dits and dashes?  Mine
sounds like QSK because the rig does not stay keyed.  Win4K3Suite CW macros
do the same since I have it set up for CW via WinKey.

73,
Tom - KQ5S

On Fri, Jan 20, 2017 at 6:22 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:

> Tom,
>
> Win4K3 is a rig control program.  It does include a panadapter display for
> those who have the hardware to provide I/Q signals to a computer soundcard
> - that much is built-in and does not require additional software
> applications.
>
> The Win4K3 software provides "hooks" to be able to run additional
> applications that normally would want to use the communications link to the
> K3 themselves - normally only one application at a time.
> But Win4K3 allows the use of multiple applications that would normally
> want connection to the K3 "all to themselves", and that allows a lot more
> flexibility in your choice of various applications that want to communicate
> with the K3.
>
> It does not itself generate CW, but does provide the "hooks" for running
> software applications which you *may* want to add.  The choice of
> applications is yours to make, and the justification for the cost of those
> applications is for your judgement only.  There is nothing in the Win4K3
> documentation that says you have to use any particular application - it
> simply states that "these applications are supported" by the Win4K3
> software.
>
> 73,
> Don W3FPR
>
> On 1/20/2017 4:59 PM, Chester Alderman wrote:
>
>> I've been a CW operator for a little more than 65 years, and I still enjoy
>> it. What I can't comprehend about Win4K3 is why should I spend $50 for the
>> program and then have to go spend >$100 for a program that does the CW
>> generation for it?
>>
>> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nineback at gmail.com
>